 |
14AWG 4 Core
Zhong Hua Jiang
14AWG
5m-5000m
4
Tinned stranded copper
PVC(RoHS)
300V
80℃/176℉
8.96Ω/KM20℃
10MΩ/KM20℃
2000AC V/min
Zhong Hua Jiang 14AWG 4-conductor shielded drag chain cable is designed for compatible CNC machine connections, moving cable carriers, automation equipment and industrial power or control wiring. Four twisted tinned stranded copper conductors are enclosed in PVC insulation and a PVC jacket, with shielding intended to help limit coupled electrical noise.
Compared with finer-gauge control wiring, 14AWG has a larger nominal copper conductor cross-section. Select this four-core cable according to the required current, voltage drop, motor or device documentation, permitted cable movement, installation environment and protective-earthing arrangements. The published ratings are 300V and 80°C, with an 11.1 ± 0.4mm overall diameter.
The published construction identifies four twisted tinned stranded copper cores, PVC core insulation, cotton rope and cotton paper filling, shielding, and a PVC outer jacket. Tinned strands can assist termination and surface oxidation resistance; actual dynamic performance depends on the complete cable construction and installation.
For machinery design, check the conductor assignment, cable-shield construction, connector entry size, the motor or controller electrical load, operating voltage, routing near interference sources and the cable-carrier movement parameters. A model-specific cross-section drawing and electrical data sheet should be obtained before final approval.
Request Pricing for 14AWG 4-Core Shielded Cable
This 14AWG four-core shielded cable can be evaluated for cable-chain machinery and compatible industrial electrical connections where the wiring diagram requires four separately insulated conductors and an overall electromagnetic shield.
Shielding can help reduce electrical noise coupled from nearby VFDs, motors or switching devices when it is terminated correctly. Keep low-level signals appropriately separated from high-noise power runs, and verify that the particular cable is qualified for the intended motor or drive circuit.
Equipment manufacturers, electrical integrators, importers and distributors can request a quotation using the model 14AWG × 4, the required cut length or reel format, quantity, equipment function, voltage and current, routing constraints and destination.
| Rated Voltage: | 300V | Number of Conductors: | 4 Twisted |
| Rated Temperature: | 80°C / 176°F | Size: | 14AWG |
| Conductor Resistance: | 8.96 Ω/km at 20°C (published value; verify by model-specific data sheet) | Conductor Material: | Tinned Stranded Copper |
| Insulation Resistance: | 10MΩ/KM 20°C | Insulation Material: | PVC (RoHS) |
| Dielectric Test: | 2000AC V/min | Isolation Material: | Cotton Rope and Cotton Paper |
| Material: | PVC + Tinned Copper | Jacket Material: | PVC (RoHS) |
| Conductor Color: | Black, White, Yellow and Green, Red | ||
| Jacket Dia(mm): | 11.1 ± 0.4 | ||
The published specification lists 8.96 Ω/km conductor resistance at 20°C and a 300V, 80°C rating. Confirm conductor resistance, insulation resistance notation and dielectric test methodology from the current product datasheet for engineering calculations.
The product visuals include a UL reference and the technical table mentions RoHS. Request certificates or test records that specifically identify the 14AWG four-core cable, including standards, issuing body and validity, before requiring these for a purchase order.
Request 14AWG 4-Core Cable Technical Documents
| UL Documentation: Verify by Cable Model | 15 Million Flex Cycles — Test Conditions on Request | Shielded | Tinned Copper Core |
 |  |  |  |
| Oxidation Resistance | Low Eccentricity | High Conductivity | Insulation Resistant |
The promotional material refers to 15 million bending cycles. Flex life depends on the actual test conditions, including bending radius, travel speed, cable loading and environment; obtain the relevant test record before specifying a cycle-life requirement.
The product is marketed for drag-chain installations. Confirm the approved dynamic bend radius, cable carrier interior height, free movement, strain relief and motion profile for this exact construction. No specific bend-radius value is provided in the technical table.
At 11.1 ± 0.4mm overall jacket diameter, check the largest permitted outside diameter when selecting drag chains, clamps, glands and connectors. Do not infer the allowable bend radius from the outside diameter alone.
| Advantage of Tinned Copper | |||
 |  |  | |
| Tinned Copper | Pure Copper | CCA Copper Clad Aluminum | |
| Easy to Solder |  |  |  |
| Copper Conductor Performance |  | | |
| Anti-oxidation | | | |
| Anti-corrosion | | | |
| Application-Dependent Durability | | | |
Four tinned stranded copper conductors support electrical connectivity and practical solder or connector termination when compatible termination procedures are used.
A moving cable’s durability depends on the strand geometry, insulating and shielding layers, fillers, jacket materials, bend radius and cycling conditions rather than copper plating alone.
The manufacturer-published conductor resistance is 8.96 Ω/km at 20°C. Verify the figure against the current model-specific test record when calculating voltage drop over the complete electrical path.
The overall shield is intended to limit externally coupled electromagnetic interference in an appropriately designed industrial cable installation.
Select the screen termination method according to the motor drive, controller and machinery grounding design. EMC performance depends on the installation, cable geometry, bonding and separation from interference sources.
An electromagnetic screen is not a substitute for a protective-earth conductor. Protective bonding must follow the applicable machine electrical standards and the equipment documentation.
The promotional materials refer to 15 million bending cycles, but the published technical specification does not identify the test radius, movement speed, acceleration or cable loading. Confirm the approved dynamic bend radius and test conditions before selecting the cable for repetitive movement.
Discuss 14AWG Cable Carrier Requirements
The four insulated 14AWG conductors may be evaluated for machinery wiring, motion equipment connections and suitable power or control circuits where the electrical designer calls for this gauge and core count.
Typical selection scenarios include drag-chain CNC machinery, motor-control-associated wiring and industrial automation power/control connections. The 14AWG size supports lower resistance than finer-gauge conductors of comparable construction, but allowable current is installation-specific and must be calculated or verified.
The cable is not automatically qualified as a VFD-to-spindle motor cable, servo cable, encoder cable or shielded data bus solely because it has four 14AWG conductors. Check the drive or device requirements for conductor arrangement, voltage, EMC, earthing and operating current.
For modified machine installations or OEM projects, submit the equipment schematic, required length, quantity, carrier motion data, cable gland dimensions, ambient conditions and relevant compliance-document requirements for technical review.
This cable provides four separately insulated conductors plus an electromagnetic shield. Select core functions using the approved machine wiring diagram. Do not count the overall screen as an extra insulated conductor or as a substitute for a protective-earth path.
AWG numbers decrease as nominal conductor diameter increases. At the same length and conductor material, 14AWG generally offers lower conductor resistance and greater physical size than 20AWG or 22AWG. Confirm installation ampacity and voltage drop separately; no universal current rating is established by gauge alone.
| Gauge | Nominal copper cross-section | Selection consideration |
| 14AWG | Approx. 2.08 mm² | Larger conductor for appropriate power or control circuits; confirm cable rating |
| 20AWG | Approx. 0.519 mm² | Intermediate conductor size for compatible device and control wiring |
| 22AWG | Approx. 0.326 mm² | Smaller conductor for suitable signal or low-current circuits |
The cable outer diameter is 11.1 ± 0.4mm, giving a nominal outside-diameter range of 10.7–11.5mm. Check cable glands, clamping, spacing, termination and cable carrier interior dimensions against the tolerance range and manufacturer-approved minimum dynamic bending radius.
The published core-color wording is Black, White, Yellow and Green, Red. Verify whether this represents black, white, one striped yellow/green conductor, and red. Yellow/green is commonly reserved for protective earthing under applicable electrical regulations; confirm the assigned conductor functions before connection.
Follow the CNC drive or controller maker’s recommendations for screened cable bonding, cable separation, electrical protection and grounding. This four-core cable should not automatically be selected for a VFD motor output or a specialized data interface without confirmation of the cable and equipment requirements.
Send 14AWG 4-Core Technical Requirements
Zhong Hua Jiang also lists other shielded chain-cable and double-shielded-cable options. Gauge, number of insulated cores, overall diameter and shielding construction should be chosen based on the machine electrical diagram and installation conditions.
Huajiang was founded in 2000, beginning with CNC engraving spindle motors and later developing VFDs, CNC machines, accessories and electrical cables. The Zhong Hua Jiang brand was introduced in 2018 for international customers.
The company has over 20 years of experience in CNC products and cites design patent No. 200730184245.5 for an air-cooled spindle-motor series. For electrical wire purchases, request applicable documents for the specific cable part number.
 | ||
| Quality Assurance Superior quality performance Strict quality control | Patents and Certifications Several patents for air-cooled spindle motors | Additional Brand Value Brand value highly recognized by the market |
 | ||
| Reasonable Price Direct factory sales High cost performance | Full Time Service Professional technical support Quick customer service | Fast and Reliable Delivery Fast and efficient delivery Real-time tracking and updates |
Zhong Hua Jiang supplies CNC router machinery including 3018, 3020, 3040 and 6090 models for engraving and machining applications.
Its product range also includes air-cooled and water-cooled CNC spindle motors for different machine designs.
CNC accessories include limit switches, Z probes, emergency-stop components and related equipment controls.
The electrical-cable range includes shielded drag-chain cables and other screened wires for compatible machine wiring installations.
Stepper motor products support CNC movement and industrial positioning systems according to the specified driver and motor combination.
For distributors, importers, machine builders and automation integrators, provide the intended cable length, annual or batch quantity, installation diagram, cable motion profile, working voltage and current, required packaging, shipment destination and applicable quality documentation.
To support engineering approval, request the exact 14AWG × 4 construction drawing, tested conductor resistance, shielding and insulation specifications, dynamic bending limits and any model-specific conformity or listing documents.
Request OEM or Wholesale Cable Pricing
Company-level certifications, testing images and customer feedback may cover different CNC equipment and wire products. Request evidence identifying the specific 14AWG four-conductor cable if a product-level compliance or performance claim is important to your procurement.
It is a four-core shielded electrical cable described for CNC machinery, cable carriers and compatible automation circuits. Its 14AWG conductors may be evaluated for electrical loads and wiring schemes that require the larger conductor size.
An overall shield can reduce coupled interference when installed with the appropriate termination, equipment bonding and separation from noisy circuits. The correct cable choice also depends on current, voltage and circuit design.
It is marketed for drag-chain use, but the published specification does not state a numerical approved bend radius, test radius or motion profile. Confirm its dynamic installation limits with the cable manufacturer.
Published values include four twisted 14AWG tinned stranded copper conductors, 300V, 80°C, an 11.1 ± 0.4mm outside diameter and 8.96 Ω/km conductor resistance at 20°C. Verify the latest model-specific data sheet for final engineering approval.
The listed core colors are Black, White, Yellow and Green, Red. This may describe black, white, a yellow/green striped core and red; confirm the physical four-core color scheme. Where applicable standards reserve yellow/green for protective earth, do not reassign it as a live or signal core.
Stranded copper facilitates cable flexibility, and tin plating can help resist surface oxidation and assist soldering. Fatigue resistance depends on the complete cable build and the permitted bend and motion conditions.
Larger 14AWG conductors have lower nominal copper resistance than 20AWG and 22AWG of equivalent composition and length, but they also require more space and a suitable termination. The correct gauge must be sized for load current, voltage drop, voltage rating, routing and applicable standards.
Custom length, jacket properties, labeling, color coding, packaging or shielding requirements can be discussed against the manufacturer’s production capabilities and the purchaser’s technical specifications.
For a quotation, send 14AWG × 4, the length required per assembly, volume, machine application, electrical diagram, voltage/current, cable-carrier movement requirements, destination and any test-document requests.
Huajiang began producing CNC spindle motors in 2000, subsequently expanding into CNC machines, VFDs, machine accessories and electrical cables. The company launched the Zhong Hua Jiang brand for international markets in 2018.
The description identifies four twisted tinned stranded copper conductors of 14AWG size, separate PVC insulation, overall shielding and a PVC jacket for compatible moving machine wiring.
The published overall jacket diameter is 11.1 ± 0.4mm. Check the stated tolerance and the exact cable drawing before sizing a cable gland or moving carrier.
The source technical table states 300V and 80°C (176°F). Verify the suitability of the completed circuit, including current, safety requirements and installation conditions.
The published value is 8.96 Ω/km at 20°C. Verify it against a model-specific datasheet or test report before using it for voltage-drop calculations.
The product table describes tinned stranded copper conductors with PVC insulation and a PVC outer jacket.
The published wording is Black, White, Yellow and Green, Red. Confirm whether yellow/green is one striped core and verify the approved terminal diagram.
Where relevant electrical standards reserve yellow/green for protective earth, it must not be assigned to unrelated live or signal functions. Follow the machine electrical design and local standards.
No. The shield is intended to limit electromagnetic interference and is not a fifth insulated core or a replacement for a protective-earth conductor.
The product is described for drag-chain use. Obtain a model-specific dynamic bend radius, allowed speed and cycle-test conditions before final installation.
No numerical dynamic bending radius appears in the published technical table. Request the approved minimum radius for this precise cable construction.
Promotional graphics cite 15 million cycles; this should not be treated as a universal service-life guarantee without test radius, speed, loading and environment details.
A larger copper conductor generally has lower resistance at comparable material and length. Actual safe current depends on the cable construction, insulation, installation, ambient temperature and governing standards.
Use the bonding and shield termination instructions for the specific drive or controller and the machine grounding design. Screen bonding methods depend on the equipment and interference environment.
Do not assume that this cable is approved for inverter-to-motor output based only on gauge, core count and shielding. Verify voltage, output current, insulation, EMC, grounding and drive-manufacturer cable requirements.
It can be evaluated for compatible four-conductor sensor or control circuits, but verify the wiring diagram, current, voltage, signal integrity and any protective-earth requirements.
Four cores alone do not establish stepper-system compatibility. Check winding connections, motor and driver currents, shielding, routing and movement requirements.
The illustrations mention UL and the product data mentions RoHS. Request valid product-specific documents naming the actual 14AWG four-core model and applicable standards.
The product data names PVC but does not provide specific exposure or ingress ratings. Request test reports for any required oil, water, UV or chemical resistance.
Provide the required cable length, identification, packaging and quantity for a technical and commercial feasibility review.
Specify 14AWG × 4, requested lengths or reel format, order volume, destination, end-use equipment, working voltage/current, drag-chain requirements and needed technical documents.
