18 Gej 2 Kɔndɔkta 18/2 Fleksibul Ilɛktrik Dabl Shild Waya UL2464 18 Gej 2 Kɔr Shild Kebul

 18 GƐJ 2 KƆNDƆKTƆ ILƐKTRIKAL DABUL SHILED WAYA 

Zhong Hua Jiang 18 Gej 2 Kɔndɔkta Ilɛktrik Dabl Shild Waya na fɔ ilɛktronik inschrumɛnt, transfɔma, motoka, ilɛktrik aplayans, CNC waya, kɔntrol waya, signal transmishɔn, ɛn lɔw-vɔlt ilɛktrik kɔnɛkshɔn projɛkt. Wit 18AWG 2 twist kɔndɔkt, tin stranded kɔpa, PVC insuleshɔn, aluminiɔm shild, tin kɔpa shild, ɛn wan kɔmpakt 5.7 ± 0.15mm jakit dayamita, dis 18/2 dabl shild kebul de ɛp fɔ ridyus ilɛktromagnetik intafɛreshɔn ɛn mentɛn stebul signal pefɔmɛns.

Dis fleksibul ilɛktrik dabl shild waya fayn fɔ aplikeshɔn usay ɔdinari waya nɔ kin gi inof EMI protɛkshɔn. Di dabl shild layt de sɔpɔt bɛtɛ intafɛreshɔn rɛsistɛns, grɔnin protɛkshɔn, ɛn stebul kɔnduktiviti fɔ ilɛktrik ikwipmɛnt, ilɛktronik divays, kɔntrol kabinɛt, CNC sistem, ɛn ɔtomɛshɔn waya.

 LAYOUT ƆF ILƐKTRIKAL SHILED WAYA 

Di layout fɔ dis 18AWG ilɛktrik dabl shild waya na bil arawnd signal stebiliti, kɔnduktiviti, ɛn shild pefɔmɛns. Di tin stranded kɔpa kɔndɔkt dɛn de gi rili ilɛktrik transmishɔn ɛn sɔldabiliti, di PVC insuleshɔn de sɔpɔt sef kɔndɔkt separeshɔn, ɛn di dabl shild strɔkchɔ de ɛp fɔ blok ɛksternal ilɛktromagnetik nɔys na sɛnsitiv waya ɛnvayrɔmɛnt.

Fɔ yuza dɛn we nid difrɛn kebul lɔng, kɔndɔkta saiz, shild strɔkchɔ, jakit rikwaymɛnt, ɔ pak we dɛn de pak, Zhong Hua Jiang kin gi kɔstɔmayz ilɛktrik shild waya sɔlvishɔn bays pan ikwipmɛnt dizayn ɛn instɔleshɔn kɔndishɔn.

 ELEKTRIKAL SHIELDED WIRE FƆ SƐL 

Yu de luk fɔ wan kɔmpakt ɛn rili 18 gej 2 kɔndɔkta dabl shild waya fɔ ilɛktronik inschrumɛnt, transfɔma, motoka, ɔ ilɛktrik aplayans? Zhong Hua Jiang Ilɛktrik Dabl Shild Waya dɛn mek fɔ yuza dɛn we nid stebul kɔnduktiviti, strɔng EMI protɛkshɔn, fleksibul instɔleshɔn, ɛn durable waya pefɔmɛns.

We yu kɔmpia am wit ɔdinari kebul we nɔ gɛt shild, dis 18AWG 2 kɔndɔkt waya we gɛt dabl shild, fayn fɔ waya nia motoka, transfɔma, kɔntrol, sɛns, VFD, ɛn ilɛktronik divays dɛn. Di aluminiɔm ɛn tin kɔpa shild layers de ɛp fɔ ridyus ilɛktromagnetik intafɛreshɔn ɛn impruv signal rilaybiliti.

Dis 18/2 dabl shild kebul na prɛktikal choice fɔ ikwipmɛnt bilda, ilɛktrik tɛknishian, ɔtomɛshɔn injinia, ilɛktronik divays manifakta, ripa wokshɔp, ɛn distribyushɔn we nid tu-kɔndukta shild waya wit stebul ilɛktrik pefɔmɛns.

 SPƐSIFIKƐSHƆN ƆF DABUL SHILED WAYA 

 18 Gej 2 Kɔndɔkt Waya 

Vɔltɛm we dɛn rayt: .	300V we yu de yuz	Di nɔmba fɔ di wan dɛn we de kɔndɔkt:	2 Dɛn dɔn twist am
Di tɛmpracha we dɛn dɔn rayt:	80°C / 176°F	Sayz:	18AWG we dɛn kɔl
Resistans fɔ Kɔndɔkt: .	26,7Ω/KM 20°C	Di Matirial fɔ Kɔndɔkt:	Tin we dɛn kɔl Stranded Kɔpa
Insuleshɔn Resistɛns: .	10MΩ/KM 20°C	Wan Sayd Aluminium (AL we de fes na do) .
Dielektrik Tɛst: .	2000AC V/min	Matirial fɔ Insuleshɔn:	PVC (RoHS) we dɛn kɔl PVC.
Tin dɛn:	PVC + Tinned Kɔpa + Aluminium	Di Matirial fɔ Jaket:	PVC (RoHS) we dɛn kɔl PVC.
Di Kɔndɔkta Kɔlɔ: .	Blak & Rɛd
Jaket dia(mm): .	5,7 ± 0,15mm

 ADVANTƐJ FƆ DƆBUL SHILED WAYA 

UL Pas we yu de pas

Dabul Shild we gɛt dabul

Tinned Kɔpa Kɔr

 Wetin Mek Wi Pik Wi Waya 

Ɔksidɛshɔn Resistɛns	Lɔw Ɛksentrisiti	Ay Kɔndɔktiviti	Insuleshɔn Resistant

 Ay Kɔndɔktiviti 

Advantej fɔ Kɔpa we Dɛn Dɔn Tink
	Kɔpa we dɛn put insay tin	Klin Kɔpa	CCA Aluminium we dɛn mek wit kɔpa
I izi fɔ Sɔlda
Bɛtɛ Kɔndɔktiviti
Anti-ɔksidɛshɔn
Anti-kɔrɛshɔn
I strɔng ɛn i kin te

Tinned Copper De Gi Eksɛlɛnt Kɔndɔktiviti

Fɔ mek di Savis Layf Lɔng

Mɔ I Fayn fɔ Sɔlda

 Layer we gɛt dabul shild 

Dabl shild layers wit aluminium ɛn tin kɔpa ɛp fɔ ajɔst prɛmiɔm shild pefɔmɛns.

Di shild layt de ɛp fɔ blok ilɛktromagnetik fil dɛm ɛn ridyus signal intafɛreshɔn insay di kebul.

Dabl shild kebul dɛn kin gi grɔn protɛkshɔn bay we dɛn de dayrɛkt lik kɔrɛnt tru di shild layt.

 APPLIKƐSHƆN ƆF DABUL SHILED WAYA 

Transfɔma we de wok	Ilɛktronik Instrɔmɛnt
Ilɛktrik Aplayans fɔ yuz	Moto

Dɛn kin yuz am bɔku bɔku wan fɔ mek ilɛktronik inschrumɛnt dɛn, ilɛktrik tin dɛn, ilɛktrik tin dɛn, transfɔma dɛn, ɛn motoka dɛn.

Dis 18 gej 2 kɔndɔkt dɛbul shild waya fayn bak fɔ CNC sistem, kɔntrol waya, signal transmishɔn, pawa saplai kɔnɛkshɔn, ilɛktronik ikwipmɛnt waya, mashin waya, ɔtomɛshɔn prɔjɛkt, ɛn lɔw-vɔlt waya ɛnvayrɔmɛnt usay EMI rɛsistɛns ɛn stebul signal transmishɔn impɔtant.

If di standad 18AWG 2 kɔndɔkta dabl shild waya nɔ mach yu prɔjek rikwaymɛnt, Zhong Hua Jiang kin sɔpɔt kɔstɔm sɔlvishɔn bays pan kebul lɔng, kɔndɔkta saiz, shild rikwaymɛnt, jakit matirial, kɔndɔkta kɔlɔ, ɛn aplikeshɔn ɛnvayrɔmɛnt.

           

 RƐKƆMƐND WAYA WE GƐT SHILED 

Apat frɔm di 18 Gej 2 Kɔndɔkta 18/2 Fleksibul Ilɛktrik Dabl Shild Waya, Zhong Hua Jiang de saplae ɔda shild kebul opshɔn dɛn bak fɔ CNC sistem, kɔntrol waya, ilɛktrik aplayans, motoka, transfɔma, ɛn ilɛktronik inschrumɛnt dɛn.

 DI KƆMPANY PROFAYL 

 ILƐKTRIKAL SHILED WAYA MANUFAKTƆR 

 WETIN MEK YU GO CHUZ WI 

 LIDIN CNC MACHIN / CNC SPINDLE MƆTƆR MANUFAKCHƆ SINS 2000 

 WI PRODƆKT RƐNJ 

 CNC Router Mashin dɛn 

Zhong Hua Jiang CNC router mashin dɛn, inklud mɔdel dɛn lɛk 3018, 3020, 3040, ɛn 6090, dɛn mek am fɔ engraving, kɔt, ɛn prɛsishɔn mashin projɛkt dɛn.

 CNC Spindle Motors we yu de yuz 

Wi spindle moto dɛn we dɛn kin kɔl ɛya ɛn wata, dɛn mek am fɔ CNC routers ɛn engraving mashin dɛn we nid fɔ mek dɛn rɔtin stebul, prɛsishɔn, ɛn fɔ de te.

 CNC Aksesoris dɛn we dɛn kin yuz 

Wi de saplae bak CNC aksesoris lek limit switch, Z probes, imejensi stop botn, en rilat ilektrikal komponent fo CNC mashin opareshon.

 Ilɛktrik Waya dɛn 

Wi ilɛktrik waya rɛnj inklud shild chen kebul ɛn dabl-shild kebul dɛn we dɛn mek fɔ ridyus signal intafɛreshɔn ɛn sɔpɔt mashin waya we pɔsin kin abop pan.

 Stepa Mɔtɔ dɛn 

Wi stɛpa motoka dɛn de gi prɛsis kɔntrol fɔ CNC mashin dɛn, ɔtomɛshɔn ikwipmɛnt dɛn, ɛn ɔda muvmɛnt kɔntrol sistem dɛn.

 PRODƆKT SƐTIFIKƐSHƆN 

 FIDBAK NA DI KƆSTƆMA 

 FAQ we dɛn kin aks 

Wetin dɛn kin yuz 18 Gej 2 Kɔndɔkta Ilɛktrik Dabl Shild Waya fɔ?

Dɛn kin yuz am fɔ ilɛktronik inschrumɛnt, transfɔma, motoka, ilɛktrik aplayans, CNC sistem, kɔntrol waya, signal transmishɔn, pawa saplai kɔnɛkshɔn, ɛn lɔw-vɔlt ilɛktrik ikwipmɛnt usay dɛn nid EMI protɛkshɔn ɛn stebul kɔnduktiviti.

Wetin waya we gɛt dabul shild min?

Dabl shild waya de yuz tu shild layers, tipikli aluminium ɛn tin kɔpa shild, fɔ impɔtant ilɛktromagnetik intafɛreshɔn protɛkshɔn ɛn ɛp fɔ mek dɛn kɔntinyu fɔ stebul signal transmishɔn na ilɛktrik sistɛm dɛn.

Wetin mek yu fɔ pik waya we gɛt dabul shild instead ɔf ɔdinari waya we gɛt shild?

Dabl shild waya bɛtɛ fɔ aplikeshɔn wit strɔng intafɛreshɔn sɔs, lɛk motoka, transfɔma, VFD, kɔntrol, ɛn ilɛktronik inschrumɛnt. I de gi strɔng EMI rɛsistɛns pas bɔku kebul dɛn we gɛt wan shild ɔ we nɔ gɛt shild.

Wetin na di men spesifikeshɔn dɛn fɔ dis 18/2 dabl shild kebul?

Dis kebul na 18AWG wit 2 twist kɔndɔkt, 300V rayt vɔlɔt, 80°C rayt tɛmpracha, 26.7Ω/KM 20°C kɔndɔkt rɛsistɛns, tin strand kɔpa kɔndɔkt, PVC insuleshɔn ɛn jakit, ɛn 5.7 ± 0.15mm jakit dayamita.

Wetin na di kɔndɔkta kɔlɔ dɛn fɔ dis 18 gej 2 kɔndɔkta waya?

Di kɔndɔkta kɔlɔ dɛn na Blak ɛn Rɛd. Dis tu-kɔr kɔlɔ kɔnfigyushɔn de sɔpɔt izi aydentifikeshɔn we dɛn de instɔl ilɛktronik inschrumɛnt, transfɔma, motoka, ɛn ilɛktrik aplayans waya.

Wetin mek dis kebul we gɛt dabul shild de yuz kɔpa we gɛt tin dɛn we dɛn dɔn strand?

Tin stranded kɔpa de gi gud kɔnduktiviti, impɔtant sɔldabiliti, ɔksidɛshɔn rɛsistɛns, kɔrɛshɔn rɛsistɛns, ɛn bɛtɛ fleksibiliti kɔmpia wit sɔlid kɔndɔkta ɔ lɔw-grɛd kɔndɔkta matirial.

Dis 18AWG dabul shild waya fit fo moto en transfoma?

Yɛs. I fayn fɔ motoka, transfɔma, ilɛktronik inschrumɛnt, ɛn ilɛktrik aplayans dɛn we di vɔlɔt, kɔrɛnt, tɛmpracha, ɛn instɔleshɔn kɔndishɔn mach di kebul spɛsifikɛshɔn dɛn.

Zhong Hua Jiang kin gi kɔstɔm dɛbul shild waya sɔlvishɔn?

Yɛs. Dɛn kin tɔk bɔt di kɔstɔm opshɔn dɛn fɔ di kebul lɔng, kɔndɔkta saiz, kɔndɔkta kɔlɔ, shild we dɛn nid, jakit matirial, pak, ɛn aplikeshɔn-spɛsifi k ilɛktrik rikwaymɛnt.

Aw a go aks fɔ kot fɔ 18 Gej 2 Kɔndɔkta Dabl Shild Waya?

Yu kin sɛn yu kebul lɔng we yu nid, kwantiti, aplikeshɔn, vɔlɔt we yu nid, kɔndɔkt kɔnfigyushɔn, ɛn wok ɛnvayrɔmɛnt to di Zhong Hua Jiang sɛl tim. Wi tim go rikomɛnd wan fayn dabl shild waya sɔlvishɔn fɔ yu prɔjek.

Na bɔt Zhong Hua Jiang

Zhong Hua Jiang we dɛn bil insay 2000, gɛt pas 20 ia ɛkspiriɛns pan CNC engraving spindle moto ɛn i dɔn mek in prodak rɛnj bɔku fɔ inklud VFD, engraving mashin, CNC aksesɔri, stɛpa motoka, ɛn ilɛktrik waya prodak.