ER25 125mm 5.5KW 220V/380V CNC Otomatik tul chenja Wata Kul Spindle Motor fɔ CNC Prɛsishɔn Engraving Mashin

 VIDEO FƆ CNC SPINDLE MƆTƆR

 KATALOG FƆ ZHONG HUA JIANG (PDF Daunlod)

  CNC Router Mashin Katalog 2025.pdf

 WATER COOLED SPINDLE MOTOR FƆ SƐL

Yu de luk fɔ wan efishɔnal ɛn rilibul sɔlvishɔn fɔ pawa yu CNC prɛsishɔn engravin mashinɔ ayvri kavin prɔjɛkt dɛn? Luk no fa pas wi Zhong Hua Jiang ER25 125mm 5.5KW Otomatik Tul Chenj Raund Wata Kul Spindle Motor.

Dis kompakt ɛn strɔng wata-kul spindle moto na fɔ mit di nid dɛm fɔ ɔbiist studɛnt dɛm, ɛn smɔl-smɔl krieta dɛm. Ficha ER25 collet, 125mm dayamita, 5.5KW pawa, ɛn ɔtomatik tul chenj (ATC) funkshɔnaliti, i de gi ay-pafɔmɛnshɔn prɛsishɔn fɔ intrikɛt engravin ɛn kɔt wok dɛn. If yu de ɛp fɔ mek wud wok fayn wit ditayla patɛn, kraft kɔmpleks ayvri kavin, ɔ lan CNC as studɛnt, dis spindl motoka de mek shɔ se yu gɛt ɛksepshɔnal rizɔlt wit di industri-standad CNC softwea kɔmpitibliti.

Wi Zhong Hua Jiang ER25 125mm 5.5KW ATC wata kul spindle moto fɔ sɛl dɛn bil fɔ mit ay-kwaliti standad, kɔnstrɔk wit durable matirial fɔ mek shɔ se lɔng-lasting pefɔmɛns ɛn prɛsishɔn. Di wata-kul sistɛm de mek shɔ se yu gɛt di bɛst tɛmpracha kɔntrol, we de mek i bi lɔw-mentenɛns adishɔn to yu CNC sɛtup.

Invest in wi Zhong Hua jiang ER25 125mm 5.5KW Ɔtomatik Tul Chenj Raund Wata Kul Spindle Motor na wan smat choice fɔ ɛnibɔdi we de luk fɔ ɛnhans dɛn CNC mashin in kapabiliti ɛn strimlayn dɛn prɛsishɔn engraving ɛn kavin prɔses.

 TƐKNIKAL SPƐSIFIKƐSHƆN DƐN

Vɔltɛm	220V/380V we yu kin yuz	1 pcs 5.5KW Raund Spindle Motor.
Fas fas	12000
Pawa	5.5KW na wan
Ilɛktrik Kɔrɛnt	11A
Ɔmɔs tɛm	400Hz we yu de yuz
KG	24KG we yu de yuz
Kɔnɛkshɔn	ER25 na di er25
Fɔ mek pɔsin kol	Wata we dɛn dɔn kɔl
De bia	Seramik Bɔl dɛn

 APPLIKƐSHƆN & YUZ KƐS DƐN

Wud

Akrilik we dɛn kɔl

Sɔft Mɛtal dɛn

 FƐCHƆR DƐN FƆ CNC WATA KUL SPINDL MƆTƆR

Kɔntrol we Yuz am fayn 

Zhong Hua Jiang ER25 5.5KW Kwayɛt Wata Kul Spindle Motor gɛt wan intɛligent kɔntrolsistim, we dɛn mek fɔ izi fɔ ɔpreshɔn, we de mek am aksesbul fɔ yuza dɛn we gɛt ɔl di skil lɛvɛl dɛn.

Ha-Prɛsishɔn Kɔlet Sistɛm 

Ekwip wit wan ER25 kolet, we de mek shɔ se yu ol tul sikyuɔr, minimal runout, ɛn prɛsis mashin fɔ kɔnsistɛns rizɔlt.

Advans GRBL Kɔmpatibiliti 

Integreted wit program logic controller (PLC) kompitibiliti, alaw izi ajɔstmɛnt fɔ spid (12000 RPM) ɛn ɔda paramita dɛn fɔ fit difrɛn prɔjek nid dɛn.

Ilɛktrik Kɔmpɔnɛnt dɛn we pɔsin kin abop pan 

Ɔl di ilɛktrik kɔmpɔnɛnt dɛn, we de sɔpɔt 220V/380V ɛn 11A kɔrɛnt, gɛt brand fɔ stebiliti ɛn rilaybiliti, we de mek shɔ se dɛn de wok fɔ lɔng tɛm.

Akkurat Spid Rɛgyuleshɔn 

Ficha prɛsis spid kɔntrol wit wan rɛnj fɔ 12000 RPM, we de mek i ebul fɔ wok smol ɛn kɔrɛkt fɔ difrɛn CNC aplikeshɔn dɛn.

Optimized Wata-Kul Dizayn 

Di solely ɛn spɛshal-dizayn wata-kul sistɛm (Ф125mm * 403mm, 24KG) mek shɔ se efyushɔn ɔt dissipeshɔn  wit ridyus nɔys , ɛnhans durabiliti ɛn pefɔmɛns fɔ ɛkstend CNC ɔpreshɔn.

 PƐKƐJ ƆF WATA KUL SPINDL MƆTƆR

If yu na hobbyist ɔ profeshɔnal CNC wokshɔp, wi gɛt di ideal Zhong Hua Jiang wata kul spindle moto sɔlvishɔn fɔ yu. Wi wata kol spindle moto dem de sopot plenti projek, from intricate engravings to hevi-duty kot, we fit fo difren skil levels. If di standad kɔnfigyushɔn nɔ mit yu nid dɛn, duya fil fri fɔ kɔntakt wi prɔfɛshɔnal sɛl tim fɔ kɔstɔmayz di pafɛkt wata kol spindle moto sɔlvishɔn fɔ yu prɔjek dɛn.

 RƐKƆMƐND SPINDUL MƆTƆR

Apat frɔm di Zhong Hua Jiang 5.5KW ER25 wata kul spindle moto, wi de gi difrɛn ɔda wata kul spindle moto mɔdel fɔ fit difrɛn CNC projɛkt nid dɛn. Wi layn-ap inklud di 0.8KW wata kul spindle moto fɔ kɔmpakt prɛsishɔn wok, di 1.5KW/2.2KW wata kul spindle moto fɔ ay-pafɔmɛnshɔn engraving ɛn kɔt pan wud, akrilik, ɛn sɔft mɛtal, di 3KW wata kul spindle moto fɔ profeshɔnal prɔjek, ɛn spɛshal ɛya-kul spindle opshɔn fɔ ɛnhans versatility.

 DI KƆMPANY PROFAYL

 CNC SPINDLE MƆTƆR MANUFAKTƆR 

 WETIN MEK YU GO CHUZ WI

 LIDING CNC MACHIN/CNC SPINDLE MƆTƆR 

 MANUFAKTƆR SINS 2000 

 WI PRODƆKT RƐNJ

CNC Router Mashin dɛn 

Wi stet-ɔf-di-at Zhong Hua Jiang CNC router mashin dɛn, inklud mɔdel dɛn lɛk di 3018, 3020, 3040, ɛn 6090, de garanti prɛsishɔn, efyushɔn, ɛn rilaybiliti, we impɔtant fɔ ay-kwaliti engravin ɛn kɔt projɛkt dɛn.

CNC Spindle Motors we yu de yuz 

Pawa yu CNC projɛkt dɛn wit wi advans spindle moto dɛn, inklud opshɔn dɛn we gɛt ɛya-kul ɛn wata-kul, we dɛn mek fɔ mit strɔng pefɔmɛns standad fɔ difrɛn matirial dɛn.

CNC Aksesoris dɛn we dɛn kin yuz 

Ɛnjɔy yu CNC ɔpreshɔn wit wi prɛsishɔn aksesɔri dɛn, lɛk limit switch, Z prob, ɛn imejensi stɔp bɔtin, we pafɛkt fɔ mek shɔ se sef ɛn akkuracy.

Ilɛktrik Waya dɛn 

Mek shɔ se kɔnɛkshɔn dɛn we pɔsin kin abop pan ɛn sef wit wi kebul dɛn we gɛt dabul shild ɛn chen kebul dɛn we gɛt shild, we dɛn mek fɔ mek di signal nɔ ambɔg bɔku ɛn fɔ mek i go te.

Stepa Mɔtɔ dɛn 

Drayv yu CNC mashin wit wi ay-pafɔmɛnshɔn stɛpa motoka dɛn, we de gi prɛsis kɔntrol ɛn strɔng ɔpreshɔn fɔ kɔnsistɛns projɛkt autkam.

 PRODUKT SƐTIFIKƐSHƆN

 FIDBAK NA DI KƆSTƆMA

 FAQ we dɛn kin aks

1. Us ​​matirial di 5.5KW Wata Kul CNC Spindle Motor kin wok wit?

I sabi fɔ engrav ɛn mayl wud, akrilik, MDF, plastic, PCB bod, PVC, pleksiglas, ɛn sɔftmɛtal lɛk aluminiɔm ɔ bras tank to in ay-spid ER25 kɔlet sistem ɛn efyushɔn ɛya-kul fɔ stebul, prɛsis pefɔmɛns. 

2. Us spesifikeshɔn dɛn di spindle moto de gi?

Di kit inklud 5.5KW wata-kul spindl moto wit spid frɔm 12,000 RPM frikshɔn we na 400Hz, kɔrɛnt we na 11A, dayamita we na Ф125mm, ɛn vɔltɛm opshɔn dɛn we na 220V/380V, lt gɛt ER25 kɔlet fɔ mek i go de fɔ lɔng tɛm.

3. A kin bay  di 5.5KW Wata Kul CNC Spindle Motor  insay bɔku bɔku ɔ as distribyushɔn?

Yɛs, na fɔ tru. Zhong Hua Jiang gɛt pas 20 ia R&D ɛn manufakchurin ɛkspiriɛns, ɛn wi wɛlkɔm di glob ɔl distribyushɔn, risɛla, ɛn ɔlsayla. Wi de gi kɔmpitishɔn faktri-dayrɛkt prayz, stebul sapɔt, ɛn pɔshɔnal ɛkspɔt sɔpɔt fɔ ɛp yu biznɛs fɔ gro.

4. Yu de gi OEM ɔ kɔstɔmayshɔn savis?

Yes, wi de gi fleksibul OEM ɛn ODM savis. Yu logo, pakej, vɔlɔt spɛsifikɛshɔn (220V/380V), kɔlet tayp, ɔ bia kɔnfigyushɔn kin kɔstɔmayz akɔdin to wetin yu nid. Wi ɔndastand se ɛvri kɔstɔma gɛt yunik prodakshɔn gol dɛn, ɛn wi injinɛri tim go tayla di ER25 125mm 5.5KW Wata Kul CNC Spindle Mɔta fɔ mit dɛn.

5. Wetin na yu minimum oda kwantiti (MOQ)?

Wi de fleksibul wit oda kwantiti. Fɔ standad kit lɛk di ER25 125mm 5.5KW Wata Kul CNC Spindle Motor, wi de aksept smɔl trayal ɔda bifo bɔku bɔku bay bay. Fɔ OEM ɔ kɔstɔmayz kit, dɛn kin tɔk bɔt di MOQ bays pan di ditel dɛn bɔt di prɔjek.

6. Aw lɔng yu prodakshɔn ɛn delivri tɛm de?

Fɔ standad kit, wi tipik lida tɛm na 3–7 wok dez afta dɛn dɔn pe. Fɔ big ɔ kɔstɔmayt ɔda, prodakshɔn kin tek 10–20 dez. Wi de wok klos wit intanashɔnal shiping patna dɛn fɔ mek shɔ se dɛn de sɛn di tin dɛn sef ɛn di rayt tɛm to yu kɔntri.

7. Us kayn warranty yu de gi fɔ  di 5.5KW Wata Kul CNC Spindle Motor?

Ɔl wi spindle motoka dɛn, pawa kɔnvɔta dɛn, ɛn aksesɔri dɛn gɛt 12 mɔnt warranty. Dɛn kin inspɛkt ɛni kit strikt wan bifo dɛn ship am. Insay di warranty tɛm, wi de gi fri tɛknikal sɔpɔt ɛn riplesmɛnt fɔ ɛni pat we gɛt fɔ du wit kwaliti.

8. Yu de gi afta-sɛl tɛknikal sɔpɔt?

Yɛs. Zhong Hua Jiang de gi yu layf-taym tɛknikal sɔpɔt bay imel, vidio kɔl, ɔ ɔnlayn chat. Wi injinia dɛn kin ɛp fɔ instɔl, fɔ sɛtup paramita, ɛn fɔ sɔlv prɔblɛm. Fɔ big distribyushɔn, wi de gi trenin ɛn dɔkyumentri bak fɔ yu lokal savis tim dɛn.