Zhong Hua Jiang 18AWG 4-Core blindage drag cakɛda kabɔri

18 AWG 4-Conducteur Shielded Drag Cakɛda Kabɔri

Zhong Hua Jiang 18AWG 4-conductor kuran cakɛda shielded wire ye flexible multi-core kabali ye CNC routeurs, kabali tabaga, otomatiki minɛnw, control circuits ani masinw ɲɔgɔndanw kama. A bɛ nɛgɛso naani fara ɲɔgɔn kan, minnu bɛ ni tintin ye, ni PVC insulation ye, PVC kɛnɛma jakite ani kuran-magnetiki-kɔlɔsili.

Kabali in ɲɛfɔlen don 300V ni 80°C baara kama, ni kɛnɛma jakite cɛmancɛ ye 8,0 ± 0,25mm ye. A jɔli min bɛ ni lakana ye, o bɛ taamasiyɛnw ni kunnafonidilanw dɛmɛ minnu sigilen bɛ kuran sɔgɔsɔgɔninjɛ sɔrɔyɔrɔw kɛrɛfɛ, ka kɛɲɛ ni kabali hakɛ bɛnnen ye, ka sira tigɛ ani ka lakana ban.

A dabɔra OEM masinw dilannikɛlaw kama, minɛnw fara ɲɔgɔn kan ani izini kabali tilabagaw kama, kabali 18/4 bɛ di sistɛmuw ma minnu bɛ ɲɛminɛbagaw dɔnni wajibiya, ka sigicogo caman kɛ ani ka drag-chain routing bɛ se ka kɛ. Kɔrɔta hakɛ yɛrɛ ani baarakɛcogo ɲɛnamaya cogoya ka kan ka dafa masin kelen-kelen bɛɛ lamagacogo la.

Aw ye 18AWG 4-Core Cable Pricing ɲini

Kabɛl jɔli ni a lakanani labɛncogo

18AWG kabali kelen-kelen bɛɛ kɔnɔ, fɛn naani bɛ yen minnu bɛ tigɛli kɛ, minnu dilannen don ni nɛgɛ ye min bɛ tintin kɔnɔ, ni PVC insulation ye ani PVC jakite. Coton juru ni cotton papier sɛbɛnnen don i n’a fɔ fɛnw minnu bɛ u faranfasi walima minnu bɛ fa, fɛn dilannenw ɲɛfɔli kɔnɔ. Kɔlɔsili-yɔrɔ dɔ bɛ a kɔnɔ walasa ka dɛmɛ don ka kuran mankan ɲininenw sirili dɔgɔya ka don kunnafonidilanw ni taamasiyɛnw sɛrɛkiliw la minnu bɛ ɲɔgɔn kan.

Kabɔri yɔrɔw bɛ baara kɛ cogo min na

• Kuran bɔgɔlan minnu bɛ tintin kɔnɔ : olu bɛ kuran ɲɔgɔndan ni dɛmɛni dabila di ni ɲɔgɔndan bɛnnenw ye walima ni solder kɛcogo bɛnnenw ye.

• PVC insulation : a bɛ kuran tabaga naani to u ni ɲɔgɔn cɛ kuran fɛ.

• Kabɔri lakanani : o bɛ dɛmɛ ka kuran-sɔgɔsɔgɔninjɛ ɲɛnabɔ ni a dabilalen don ani ni a bɛ dugukolo kan ka kɛɲɛ ni masin dilannikɛla ka kuran dilancogo ye.

• PVC kɛnɛma jakite ni kɔnɔna fasa : aw bɛ insulasi ni masin labɛnni di kabali tabaga kɔnɔ.

Walasa ka fɛnw sugandi ka ɲɛ, aw bɛ sisan ja tigɛli, conducteur stranding, shield coverage ani installation parameters dabɔlenw ɲini sani aw ka kabali don fɛn dilanni masin kɔnɔ.

18/4 Shielded Chain Wire ka ɲɛsin OEM ani Industriw ka fɛnw ma

Nin kuran kabɔri 18 gauge four-core shielded in dabɔra masinw ka wiring kama yɔrɔ min na shielded signal walima control connections ka kan ka tɛmɛ kabali lamaga siraw fɛ. Baarakɛcogo minnu bɛ Kɛ cogoya la, olu ye dantigɛli-switch wiring, CNC dɛmɛnanw, sensorw, actuator control lines ani kuran sɛrɛkili wɛrɛw ye kabali hakɛ kɔnɔ.

O fɛn bɛ dilan i n’a fɔ cakɛda kabɔri min bɛ lakana, sanni ka kɛ fɛn ye min bɛ se ka ɲɔgɔn falen a yɛrɛma, ka kɛ fɛn ye min bɛ se ka ɲɔgɔn falen a yɛrɛma, ka ɲɛsin spindle kuran kabɔri bɛɛ ma walima motɛri kabɔri min bɛ ni kuran caman ye. Aw bɛ kuran min bɛ se ka kɛ, o bɛ se ka kɛ ko a bɛ se ka kɛ ni kuran ye, ni a bɛ se ka kɛ ni kuran ye ani ka kabali tabaga lamagacogo dafa sani aw k’a jira VFD walima motɛri baarakɛcogo la.

Jagokɛlaw ni jɛgɛfeerelaw bɛ se ka laɲini janya, san ɲinini, taayɔrɔ sugu ani sɛbɛnw wajibiyalenw di walasa ka jatebɔ kɛ. Fɛn dilannenw lisɛli minnu bɛ yen, olu b’a jira ko janya bɛ se ka sɔrɔ min bɛ se mɛtɛrɛ 5 ma ka se mɛtɛrɛ 5000 ma; tigɛ janya kofɔlen ni pakew labɛncogo dafa komandi kelen-kelen bɛɛ kama.

Aw ye Distributeur ni OEM Supply Terms ɲini

18AWG 4-Conductor Shielded Kabɔri Ɲɛfɔliw

Tablo min bɛ duguma, o bɛ kuran ni fɛnw ɲɛfɔcogo sɛbɛnnenw lajɛ. Aw bɛ ɲɛminɛbaga dɔnni ni sɛgɛsɛgɛli fɛɛrɛw dafa ka kɛɲɛ ni fɛn dilannenw ka kunnafonidilan ni komandi ɲɛfɔli ye.

Voltage Nominal:	300V ye	Ɲɛmɔgɔyabagaw hakɛ:	4 Tigɛlen
Funteni hakɛ min bɛ jate:	80°C / 176°F ye	Kundama:	18AWG ye
Conducteur ka rezisti: 1.1.	13,7Ω/KM 20°C ye	Dilanbaga ka baarakɛminɛnw:	Tinned Stranded Kupu
Insulasi Rezisti:	10MΩ/KM 20°C ye	Fɛn min bɛ kɛ ka insulasi kɛ:	PVC (RoHS) ye.
Dielektriki sɛgɛsɛgɛli:	2000AC V/min	Fɛn min bɛ kɛ ka mɔgɔw bila ɲɔgɔn na:	Coton Rope ani Coton Paper
Minɛ:	PVC + Kupu min bɛ kɛ ni tin ye	Jacket Materiel:	PVC (RoHS) ye.
Dilanbaga ka kulɛri:	Dugukolonɔn, Fin, Jɛman, Gɛrɛn, Bilen (kolo naani minnu dira, olu ka kan ka dafa)
Jacket Dia(mm): 1.	8,0 ± 0,25 ye

Dilanbaga kulɛri dɔnni bɛ dantigɛli de wajibiya: fɛn dilannen kunnafoniw minnu bɛ sɔrɔ, olu bɛ kolo naani jira nka u bɛ kulɛri duuru fɔ—nɛrɛ, fin, jɛman, wuluwulu ani bilen. Kulɛri naani labɛncogo wajibiyalen fɔ sani i ka komandi kɛ.

Kabɔri sugandili sɛgɛsɛgɛli sɛbɛn

Core jate ani a bonya	4 × 18AWG ye; aw bɛ kulɛri kolomayɔrɔw sinsinni dafa
Kuran cogoyaw hakɛ jateminɛlenw	300V, 80°C ye; baarakɛcogo yɛrɛyɛrɛ sɛgɛsɛgɛli
Conducteur ka rezisti (kɛlɛli).	13,7 Ω/km 20°C la fɛn dilannenw ɲɛfɔli sɛbɛnnen kelen kɔnɔ; aw bɛ a sɛmɛntiya ni sɛgɛsɛgɛli rapɔɔri ye
Kabɔri kɛnɛma cɛmancɛ	8,0 ± 0,25mm ye
Kɔrɔtacogo dinamiki	Aw bɛ ben radius minimum, taama, teliya ani cycle-test sariyaw dafa
Sɛbɛnw ni taamasiyɛnw	Aw bɛ UL/RoHS sɛbɛnw ɲini minnu bɛ tali kɛ modɛli kɛrɛnkɛrɛnnenw na ni a mago bɛ a la
Foroko minnu bɛ kɛ	Aw bɛ tigɛ janya, taamasiɲɛw ani kabali bobinew ɲɛfɔli dafa

Kabila ja ni Technique Quote ɲini

18AWG High-Flex Shielded Chain Cable ka baarakɛcogo

Cakɛda nɛgɛ min bɛ 18/4 lakana, o bɛ fɛnw fara ɲɔgɔn kan minnu bɛ se ka wuli ka bɔ ɲɔgɔn na, kabali sirilan ani PVC insulasi CNC ni otomatiki nɛgɛw kama. Baarakɛcogo sɛbɛnw sinsin modeli kɛrɛnkɛrɛnnen jɔli kelen-kelen bɛɛ kama.

UL Sɛbɛnw: A sɛgɛsɛgɛ ni File Number ye

High-Flex Cable: Cycle-Test Details ka kɛɲɛ ni ɲinini ye

Shielded (kɔlɔsili).

Kupu Core min bɛ tintin

O kabali in ɲɛfɔlen don iko shielded high-flex design. Aw ye UL dosiye kunnafoni kɛrɛnkɛrɛnnenw ɲini ani dynamique-cycle test cogoya dafalenw porozew kama minnu bɛ sɛbɛnw labatoli walima flex ɲɛnamaya wajibiya.

Tinned Copper ani Insulation Nafaw

Oksidan (Oxidation) kunbɛncogo

Eccentricité (Eccentricité) min ka dɔgɔ

Conductivity (Konduktivité) ka bon

Insulation Resistant (A bɛ se ka kɛ ni insulasi ye).

Kupu min bɛ tintin na, o bɛ ɲɛminɛbaga sanfɛla ka se ka oksidan kunbɛn, wa a bɛ se ka dɛmɛ don walasa soldered terminations ka kɛ cogo kelen na. PVC insulation, conducteur yɔrɔjan bɛnnen ani kabali lajɛcogo bɛnnen fana nafa ka bon kuran baarakɛcogo la.

Kabali min bɛ se ka wuli ka bɔ a nɔ na walasa ka segin-ka-bɔ-cakɛda lamaga

Fɛn dilannenw kunnafoniw bɛ kuma 15 miliyɔn cycle bending test claim kan. Sani aw ka baara kɛ ni nin nafa in ye i n’a fɔ dilancogo wajibiyalen, aw bɛ sɛgɛsɛgɛli rapɔɔri ɲini min bɛ kurukuru hakɛ, taama janya, lamaga teliya, funteni ani sɔnni sariyaw jira. Kabali ɲɛnamaya yɛrɛ bɛ bɔ a sigicogo dafalen ni a baarakɛyɔrɔ la.

Kabila-ta-minɛnw dilanni ka kan ka kɛ ni kurukuruni hakɛ bɛnnen ye, kabali yɔrɔ bɛrɛbɛrɛ, ka sɛgɛnlafiɲɛbɔcogo ɲuman ani ka faranfasi ka bɔ fanga caman ka filiw la minnu tɛ bɛn, yɔrɔ minnu na a mago bɛ a la.

Kupu ɲɛminɛfɛnw sumalen

Kupu min bɛ tintin na ani konducteurs alternatifs: Sanga min bɛ kɛ ni ja ye
	Kupu min bɛ tintin na	Kupu saniyalen	CCA Aluminiyɔmu min bɛ kɛ ni nɛgɛ ye
A ka nɔgɔn ka Solder
Conductivity ka fisa
Oksidan kɛlɛli
Anti-corrosion (sɔgɔsɔgɔninjɛ kɛlɛli).
A barika ka bon ani a bɛ mɛn

Conducteur jaw bɛ nɛgɛ min bɛ tintin na, nɛgɛ gansan ani aliminiyɔmu min datugulen don ni nɛgɛ ye, olu suma ɲɔgɔn na. U ye misali dɔrɔn ye : nɛgɛ gansan fana bɛ se ka solder, wa kuran baarakɛcogo bɛ bɔ conducteur cross-section, construction, plating, corrosion exposure ani termination fɛɛrɛ la. Aw bɛ kunnafoniw ɲini sanni aw ka ja ta i n’a fɔ laboratuwari sɛgɛsɛgɛli jaabiw.

Shielding for Control ani Signal Circuits (Kɔrɔsili ni Siginidenw ka sɛrɛkiliw).

Kabila min bɛ lakana, o bɛ se ka dɛmɛ ka dɔ bɔ fɛnw na minnu bɛ nɔ bila CNC kunnafonisɛbɛnw na, encodeur-related circuits ani izini ɛntɛrinɛti kan. Kɔlɔsili dabilacogo ɲuman ani minɛnw dugukolo kan, o nafa ka bon; kala yɛrɛ tɛ dugukolo lakanani-minɛn min bonya bɛnnen don, o bila a nɔ na.

Baro kɛ Aw ka Drag-Chain Wiring Application kan

CNC ani Otomatiki Baarakɛminɛnw

18AWG cakɛda kabɔri min bɛ ni kɔnɔna naani ye, o bɛ se ka jateminɛ walasa ka kuran jɛgɛncogo ɲɛnabɔ ani ka dɛmɛ don CNC routeurs kɔnɔ, ja dilanni minɛnw kɔnɔ, robow lajɛlenw na, otomatiki kabiniw kɔnɔ ani kabali tabaga lamagannenw na. Sugandili bɛ bɔ ɲɛminɛbaga tilatilali la, kabali fanga hakɛ la, lakanani wajibiyalenw ani lamaga fangama cogoyaw la.

Sanni kɛcogo minnu bɛ kɛ cogoya la

• CNC routeur ani engraving-machine dɛmɛnanw ka wiring, i n’a fɔ sensor bɛnnenw, switchw ani control signals.

• Kabɛl-ta-minɛnw jɛgɛncogo otomatiki masinw kan, ka kɛɲɛ ni dinamiki bending specifications ye minnu dagalen don.

• Jɛɲɔgɔnya minnu bɛ kɛ ni fɛn caman ye, olu bɛ se ka kɛ ka ɲɛsin kunnafonidilanw ni ɛntɛrinɛti minɛnw ma.

• Masina ladonni ani OEM cili kabɔri yɔrɔ min na kuran ni masinko ɲɛfɔli bɛ bɛn.

Walasa ka lamaga ka taa a fɛ, aw bɛ kɔrɔta hakɛ fitinin wajibiyalenw ni taama cogoyaw dafa. Baarakɛminɛn o baarakɛminɛn bɛ motɛri walima VFD bɔli fanga ta, aw bɛ a lajɛ ni nin kabali kɛrɛnkɛrɛnnen in sɔnna ka sigi sen kan sanni aw k’a miiri ko a bɛnnen don ka bɔ kabali tɔgɔ dɔrɔn na.

Aw ye laadilikanw sɔrɔ kabɛl baarakɛcogo ni a janya kan

Kuranko lakananenw ka kuluw minnu bɛ tali kɛ ɲɔgɔn na

Aw bɛ cakɛda kabɔri lakananen suma kabali-ta-minɛnw sigiyɔrɔw lamagacogo la ni kabali lakananen fila ye min dabɔra minɛn wɛrɛw ka sirili ni dankarili-kɔlɔsili wajibiyalenw kama. Kuran hakɛ, ɲɛminɛbagaw hakɛ, shielding jɔli ani dynamic-flex approval ka kan ka bɛn ɲɔgɔn ma.

Kuran cakɛda Shielded Fil

Kuranko Filɛri min bɛ ni fila ye

Aw ye ɲininkali kɛ Bulk Shielded Cable Options kan

Zhong Hua Jiang ka sosiyete ani a ka fɛnw dilancogo

CNC ani Kuranko fɛnw dilancogo

Huajiang y’a ka CNC spindle-motor dilanni baara lajɛ fo san 2000 ani a ye Zhong Hua Jiang taamasiyɛn jira san 2018. A ka fɛn dilannenw ka ca ni CNC routeur minɛnw ye, spindle motɛriw, VFDw, stepper motɛriw, fɛn wɛrɛw ani kuran kabɔriw.

Ka ɲɛsin izini kabɔri komandiw ma, sannikɛlaw bɛ se ka kunnafoniw ɲini kabali jɔli kan, a janya minnu bɛ sɔrɔ, a pakew, a taayɔrɔ wajibiyalenw ani CNC kabɔri fɛnw minnu bɛ tali kɛ o la. Aw ye kabali ni baarakɛminɛn wajibiyalenw dɔn ni aw bɛ fɛɛrɛ sɛbɛnw ɲini.

Sosiyete ka baarakɛminɛnw ani fɛn dilannenw suguyaw

Jogoɲumanya sabatili Jogoɲumanya baarakɛcogo ɲuman Jogoɲumanya kɔlɔsili gɛlɛn	Patentiw ni seereyaw Patenti caman bɛ sɔrɔ fiɲɛ nɛnɛmanw na minnu bɛ kɛ ni spindle motɛriw ye	Nafa wɛrɛ Marka Nafa Marka nafa min bɛ dɔn kosɛbɛ sugu fɛ
Sɔngɔ bɛnnen Izini feereli tilennen Muɲu baarakɛcogo ɲuman	Waati dafalen baara Baarakɛlaw ka fɛɛrɛbɔ dɛmɛni teliya la kiliyanw dɛmɛni	Lase teliya ni dannaya bɛ se ka kɛ Lase teliya la ani cogo ɲuman na Waati yɛrɛ la tuguni ni fɛn kuraw

O tɔn in bɛ CNC routeur masinw fana dilan, fiɲɛ nɛnɛ ni ji nɛnɛ spindle motɛriw, kuran minɛnw, shielded cables ani stepper motɛriw. Fɛn kɛrɛnkɛrɛnnenw ka seereyaw ni baarakɛcogo wajibiyalenw ka kan ka jateminɛ fɛn kelen-kelen bɛɛ la u danma.

Aw ye ɲɔgɔn sɔrɔ Zhong Hua Jiang Feerekɛlaw fɛ

Sosiyete ka seereyaw ja ani kabɛl sɛbɛnw

Fɛn dilanbaga ka seere ja jiralen bɛ sanfɛ. Ni aw b’a fɛ ka 18AWG kabali naani tigitigi sɔrɔ, aw bɛ seere nimɔrɔ ɲini min bɛ tali kɛ o la, UL dosiye ɲɛfɔli, kabali taamasiyɛn kunnafoniw ani RoHS fɛnw jirali sani aw ka sariya labatoli latigɛ.

Kunnafoni minnu bɛ sɔrɔ kiliyanw fɛ

Ja min bɛ sanfɛ, o bɛ kiliyanw ka hakilinaw jira. Ni aw b’a fɛ ka OEM walima kabali sanni kɛ jɛgɛfeere la, aw bɛ se ka kuma feerekɛlaw fɛ ni poroze ɲɛfɔli sɛbɛnw ye ani hakɛ ɲininenw walasa fɛn dilannenw ka bɛn ani sɛbɛnw ka se ka lajɛ minnu bɛ u dɛmɛ.

Ɲininkali minnu bɛ kɛ tuma caman na 18AWG 4-Core Shielded Cable kan

18AWG 4-conductor shielded chain cable bɛ kɛ mun na?

A dabɔra CNC masinw kunnafoni-falen-falen-minɛnw kama, sensɛri sugandilenw ni taamasiyɛn dɛmɛnanw ɲɔgɔndanw, otomatiki minɛnw ani kabali-taama siraw yɔrɔ minnu na ɲɛminɛbaga naani ni lakanani de wajibiyalen don. Kuran ni fanga sigicogo ka kan ka bɛn kabali dilanni ma.

18/4 kɔrɔ ye mun ye kuran cakɛda nɛgɛ kan?

18/4 kɔrɔ ye ko kabali in bɛ ni ɲɛminɛbaga naani ye, u kelen-kelen bɛɛ bɛ ni 18 American Wire Gauge tɔgɔla hakɛ ye. Kɔlɔsili ni kɛnɛma jakite ye jɔlifɛn wɛrɛw ye, u tɛ kurunba wɛrɛw ye minnu bɛ kuran ta.

Voltage hakɛ jateminɛlen ni baarakɛcogo funteni ye mun ye?

A hakɛ minnu kofɔlen dòn olu ye 300V ani 80°C (176°F) ye. Aw bɛ a sigicogo wajibiyalenw sɛgɛsɛgɛ, doni min bɛ kɛ sisan ani sigida kuran sariya minnu bɛ sirataama minɛn laɲinitaw kan.

Nin 18 gauge shielded cable in cɛmancɛ ye mun ye?

Jakisɛ min bɔra kɛnɛ kan, o janya ye 8,0 ± 0,25mm ye. Aw bɛ kabali tabaga yɛrɛ, glandes ani connecteur strain-relief hakɛw lajɛ sani a ka sigi.

Kuran ɲɛminɛlan ye mun ye?

O fɛn ɲɛfɔlen bɛ kuran sirilanw jira minnu bɛ tintin na, minnu bɛ ni PVC insulation ye ani PVC jakite. A bɛ cotton juru ni cotton papier fana jate i n’a fɔ kɔnɔna danfaralanw walima fasafɛnw.

Conducteur resistance kofɔlen ye mun ye?

Fɛn dilanbaga ka konducteur-resistance hakɛ min bɔra kɛnɛ kan, o ye 13,7 Ω/km ye 20°C la; ɲini ka ɲɛfɔli ɲini o bɛ tali kɛ cogo min na 18AWG ɲɛminɛbaga hakɛ tɔgɔlama la. Aw ye sisan kunnafonidilan ni sɛgɛsɛgɛli fɛɛrɛ ɲini ni rezisti muɲuli ye sanni kɛcogo kɔrɔsilen ye.

Yala shielding bɛ dɛmɛ ka dɔ bɔ interferences la CNC control circuits kɔnɔ wa?

Awɔ. Kɔlɔsili min dilannen don ka ɲɛ ani min dabɔra, o bɛ se ka dɔ bɔ kuran-sɔgɔsɔgɔninjɛ jɛɲɔgɔnya la ka kɛ taamasiyɛn walima kunnafoni-falen-falen kabɔri ye. Dugukolo sigicogo ɲuman, kabali farali ani a dabilacogo bɛ to ka kɛ nafama ye.

Yala nin kabali naani bɛ se ka don drag cakɛda lamagalen dɔ kɔnɔ wa?

O fɛn in bɛ dilan i n’a fɔ cakɛda kabɔri min bɛ se ka wuli ka bɔ a nɔ na walasa ka fɛnw bila yɔrɔ lamaga. Aw bɛ kɔrɔta hakɛ wajibiyalenw, taama janya, teliya, sɛgɛnbaliya ani fanga-ɲɛnamaya cogoya sɛgɛsɛgɛlenw dafa masin kɛrɛnkɛrɛnnen in na.

Yala kabali garanti bɛ se ka kɛ miliyɔn 15 bending cycles ye wa?

Fɛn dilannenw kunnafoni bɛ cycle miliyɔn 15 kofɔ, k’a sɔrɔ sɛgɛsɛgɛli cogoya dafalen tɛ. Aw bɛ sɛgɛsɛgɛli rapɔɔri ɲini min bɛ bɛn o ma ani ka o cogoyaw bɛn sigicogo laɲininen ma sani aw ka aw jigi da o jate kan.

Conducteur kulɛri naani jumɛnw bɛ dilan?

Fɛn dilannenw kunnafoni minnu bɛ sɔrɔ, olu bɛ nɛrɛ, fin, jɛman, wuluwulu ani bilen fɔ hali ni u ye koori naani ɲɛfɔ. Aw bɛ kulɛri naani tigitigi minnu dira ani u ka filiw dantigɛli sɛbɛn dilanbaga fɛ sani aw ka komandi kɛ.

Yala 18AWG kabali naani-core UL seereyalen don wa?

Kabali in bɛ feere ni daɲɛw ye minnu bɛ tali kɛ UL la, UL2464 ɲɛfɔli fana bɛ o la. Walasa ka poroze sɛbɛnw sɔrɔ, aw bɛ a dilabaga ka UL dosiye nimɔrɔ tigitigi ɲini ani ka kabali jɔcogo, taamasiyɛn sɛbɛnnenw ani dɔnniya walima seereyaw hakɛ sɛgɛsɛgɛ min bɛ tali kɛ o la.

Yala PVC insulasi bɛ bɛn RoHS ma wa?

Fɛn dilanbaga ka ɲɛfɔli b’a ka PVC insulasi ni a ka jakite jira ko 'PVC (RoHS).' Sannikɛlaw minnu bɛ sɛbɛnw labatoli ɲini, olu ka kan ka sisan modeli kɛrɛnkɛrɛnnen jirali walima fɛnw sɛgɛsɛgɛli rapɔɔri ɲini.

Yala nin kabali in bɛ se ka kɛ VFD spindle-motor kuran kabɔri ye wa?

Aw kana a miiri ko a bɛnnen don ka da shielding ni 300V listing dɔrɔn kan. Aw bɛ konducteur current seko, bɔli-kabɔri wajibiyalenw, sigida hakɛw ani VFD walima spindle dilannikɛla ka sigicogo cikanw dafa.

Cakɛda kabɔri min bɛ lakana, o ni nɛgɛ gansan min bɛ lakana, o tɛ kelen ye cogo di?

Cakɛda kabɔri dabɔra siraw kama minnu bɛ segin-ka-bɔ, yɔrɔ minnu na a kɔrɔtacogo nafa ka bon ka fara a kuran cogoya kan. Kabila gansan min bɛ lakana, o bɛ se ka sɔn sigida jɔlenw na nka a man kan ka bila a nɔ na sigida lamagannenw na ni a ma sɔn ka a lajɛ.

Yala o kala bɛ dugukolo lakanani nɛgɛ bila a nɔ na wa?

Ayi, shield jɛɲɔgɔnya bɛ se ka kɛ kuran bɛnkan fɛɛrɛ dɔ ye, nka lakanani dugukolo ka kan ka dilan a danma ka kɛɲɛ ni minɛnw ka lakana sariyaw ye.

Yala ne bɛ se ka kabali janya kɛrɛnkɛrɛnnenw ni u foroko ɲini wa?

Siti in bɛ kabali janya jira min bɛ se mɛtɛrɛ 5 fo mɛtɛrɛ 5000 ma. Lase janya, tigɛ muɲuli, pakew ani kabali-bobine kunnafoniw ka kan ka dafa quotation kɔnɔ min bɛ kɛ komandi kɛrɛnkɛrɛnnen kama.

OEM sannikɛla ka kan ka kunnafoni jumɛnw di walasa ka quotation sɔrɔ?

18AWG naani jɔli wajibiyalenw di, komandi hakɛ makɔnɔnen, kabali janya, kɔnɔna kulɛriw, baarakɛcogo, lamaga-lamagali fangama paramɛtiriw, taayɔrɔ suguya ani sɛgɛsɛgɛli walima sariya labatoli sɛbɛnw wajibiyalenw di.

Yala Zhong Hua Jiang bɛ se ka baro kɛ kabali wajibiyalenw kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Fɛn dilanbaga b’a ɲini ka baro kɛ baarakɛcogo kɛrɛnkɛrɛnnen janya kan, ɲɛminɛbaga dɔnni, lakanani ani pakew dilanni wajibiyalenw kan. Yɛlɛma o fɛn ɲininen bɛ so jɔli la, o ka kan ka lajɛ fɛɛrɛko siratigɛ la, ka o sɛmɛntiya sɛbɛn fɛ.

Insulation-resistance ani dielectric-test nafaw ka kan ka faamuya cogo di?

Fɛn dilanbaga ka sɛgɛsɛgɛli hakɛ minnu bɔra kɛnɛ kan, olu ye 10 MΩ/km ye 20°C la ani '2000AC V/min.' A ɲini feerekɛla fɛ a ka sɛgɛsɛgɛli kɛcogo, a hakɛw ani sɔnni cogoyaw dafa sani a ka baara kɛ ni o hakɛ fila la kelen ye i n’a fɔ sɛgɛsɛgɛli sariyasun.

Mun na i bɛ nɛgɛ min bɛ tintin na, o sugandi sanni ka aliminiyɔmu min datugulen don ni nɛgɛ ye?

Kupu min bɛ tintin na, o bɛ nɛgɛdaga ni tintin lakanani yɔrɔ fara ɲɔgɔn kan walasa ka dɛmɛ don nɔgɔw kunbɛnni na ani solder labanni na. Aw bɛ ɲɛminɛbaga fɛnw suma ɲɔgɔn na ni dilancogo wajibiyalenw ni kunnafoniw ye minnu dagalen don, aw kana kɛ ni fɛnw sumacogo nɔgɔyalenw ye minnu bɛ fɛnw suma ɲɔgɔn na.

Aw ye Quote ɲini 18AWG 4-Core Chain Wire kan