18 Ma'auni 4 Mai Gudanarwa 18/4 Madaidaicin Sarkar Lantarki Mai Garkuwa Waya UL2464

 18 GAUGE 4 CONDUCTOR COIN LANTARKI WIRE 

Zhong Hua Jiang 18 Gauge 4 Mai Gudanar da Sarkar Garkuwar Wutar Lantarki an ƙera shi don injinan CNC, tsarin ja da sarkar, kayan aiki na atomatik, na'urorin sarrafa motsi, watsa sigina, da buƙatar ayyukan haɗin wutar lantarki. Tare da na'urorin jan ƙarfe na tinned, rufin PVC, kariyar kariya, da babban gini mai sassauƙa, wannan kebul ɗin kariya na 18AWG 4 yana taimakawa rage tsangwama na lantarki yayin da yake riƙe da amincin siginar motsi a aikace-aikacen kebul.

Wannan m sarkar lantarki garkuwa waya dace da masu amfani da suke bukatar wani m 18/4 garkuwa na USB don CNC na'ura mai ba da hanya tsakanin hanyoyin sadarwa wiring, spindle motor siginar wiring, iko hukuma wiring, stepper motor sadarwa, firikwensin wiring, da sauran low-ƙarfin lantarki tsarin lantarki inda sassauci, conductivity, garkuwa, da kuma dogon sabis rayuwa suna da muhimmanci.

 SHAFIN WAYAR GARKUWAN LANTARKI 

Ma'auni 18 ma'auni 4 mai sarrafa sarkar lantarki da aka karewa waya yana amfani da tsari mai amfani mai yawa don ingantaccen aiki a tsarin motsi na wayoyi. Mai daurin jan karfen da aka makala tinned yana inganta iya aiki da kuma solderability, rufin PVC yana goyan bayan tsayayyen rabuwar wutar lantarki, kuma rufin garkuwa yana taimakawa kare sigina daga hayaniyar EMI na waje. Wannan tsarin ya sa kebul ɗin ya dace da CNC, robotics, sarrafa kansa, injinan sassaƙawa, da ja da mahallin wayoyi.

Idan aikin ku yana buƙatar tsayin al'ada, launi mai jagora, hanyar marufi, ko daidaitawar kebul na lantarki, Zhong Hua Jiang na iya samar da madaidaicin mafita na waya mai kariya dangane da ƙirar kayan aikin ku da buƙatun wayoyi.

 WATA GARKUWAN SARKIN LANTARKI NA SALLA 

Wannan waya mai kariya ta Zhong Hua Jiang 18AWG 4 an gina shi ne don masu amfani waɗanda ke buƙatar amintaccen igiyar igiyar wutar lantarki don watsa sigina da tsarin haɗin motsi. Yana haɗu da ginin kebul mai sassauƙa, tushen jan ƙarfe mai tinned, kariya mai kariya, jaket na PVC, da ƙimar 300V don aikin wutar lantarki mai ƙarfi.

Idan aka kwatanta da waya mara garkuwa na yau da kullun, wannan kebul ɗin kariya ta sarkar lantarki ta fi dacewa da mahalli inda igiyoyi ke motsawa akai-akai ko suna tafiya kusa da injina, VFDs, firikwensin, masu sarrafawa, da sauran na'urorin lantarki. Tsarin garkuwa yana taimakawa rage tsangwama, yayin da madaidaicin jan karfe yana goyan bayan sassauci da amincin lantarki na dogon lokaci.

Zabi ne mai amfani ga masu amfani da injin CNC, magina kayan aiki, injiniyoyin lantarki, injiniyoyin injiniyoyi, masu yin aiki, wuraren gyaran gyare-gyare, da masu rarrabawa suna neman madaidaiciyar waya mai kariya ta 18/4 tare da ingantaccen aiki.

 BAYANIN WAYAR GARKUWAN SARKI 

 18 Ma'auni 4 Waya Mai Gudanarwa 

Ƙimar Wutar Lantarki:	300V	Adadin Masu Gudanarwa:	4 Karkatawa
Kimanta Zazzabi:	80°C/176°F	Girman:	18AWG
Juriya Mai Gudanarwa:	13.7Ω/KM 20°C	Kayan Gudanarwa:	Tinned Stranded Copper
Juriya na Insulation:	10MΩ/KM 20°C	Abun rufewa:	PVC (RoHS)
Gwajin Dielectric:	2000AC V/min	Abubuwan Warewa:	Igiyar Auduga da Takarda Auduga
Abu:	PVC + Tinned Copper	Kayan Jaket:	PVC (RoHS)
Launi Mai Gudanarwa:	Baki, Fari, Yellow da Green, Ja
Jaket Dia(mm):	8.0 ± 0.25

 FALALAR WAYA GARKUWAN SARKI 

UL Pass

15 Million Matsanancin sassauci

Garkuwa

Tinned Copper Core

 Me Yasa Zabi Wayar Mu 

Resistance Oxidation

Low Eccentricity

Babban Haɓakawa

Insulation Resistant

 Kebul Mai Sauƙi Mai Girma 

Kewaya Miliyan 15 Mai Sauƙi

Mai jituwa da Tsarin Sarkar

Tsarin kebul mai ƙarfi mai ƙarfi yana taimaka wa 18 ma'auni 4 madugu waya yi a cikin ja sarkar da motsi na USB tsarin. Ya dace da kayan aikin da ke buƙatar maimaita lankwasawa, tsararrun hanyar kebul, da kwanciyar hankali na haɗin lantarki na dogon lokaci.

 Babban Haɓakawa 

Amfanin Tinned Copper
	Tinned Copper	Tagulla zalla	CCA Copper Clad Aluminum
Sauƙi don siyarwa
Ingantacciyar Hali
Anti-oxidation
Anti-lalata
Karfi da Dorewa

Tinned Copper yana ba da Kyakkyawan Haɓakawa

Tsawaita Rayuwar Hidima

Mafi Dace Don Sayar

 Waya Garkuwar sarka 

Karewa yana taimakawa kariya daga tsangwama na lantarki.

Wannan yana da mahimmanci don kiyaye amincin sigina a cikin CNC da wayoyi ta atomatik.

Hakanan igiyoyin garkuwa suna iya tallafawa kariyar ƙasa a cikin ƙirar lantarki masu dacewa.

 APPLICATION OF sarkar Garkuwa WIRE 

An ƙirƙira don sassauƙa, mai ɗorewa, da wayoyi na lantarki masu jure tsangwama.

Ya dace da injunan CNC, sarƙoƙin ja, kayan aiki na atomatik, tsarin sarrafawa, da siginar sigina.

Wannan m sarkar lantarki garkuwa waya dace da CNC na'ura mai ba da hanya tsakanin hanyoyin sadarwa inji, spindle motor wiring, engraving inji, stepper motor tsarin, firikwensin, masana'antu sarrafa kayan aiki, mutummutumi wiring, na USB ja sarƙoƙi, da sauran lantarki ayyukan inda barga siginar watsa da kuma m motsi yi ake bukata.

Idan ma'auni mai kariya na 18AWG 4 waya mai kariya bai dace da bukatun aikinku ba, Zhong Hua Jiang na iya tallafawa mafita na al'ada dangane da girman jagora, tsayin igiya, buƙatun garkuwa, nau'in jaket, da yanayin aikace-aikacen.

           

 SHAWARAR WAYAR GASKIYA 

Bayan 18 Gauge 4 Conductor 18/4 M Sarkar Garkuwar Wutar Lantarki, Zhong Hua Jiang kuma yana ba da wasu zaɓuɓɓukan kebul mai kariya don tsarin CNC, sarrafa wayoyi, aikace-aikacen sarkar, da ayyukan haɗin lantarki.

 BAYANIN KAMFANI 

 MANUFAR WAYA GARKUWAN LANTARKI 

 ME YASA ZABE MU 

 JAGORANCIN NASHIN CNC / CNC SPINDLE MOTOR MANUFACTURING TUN 2000 

 YAWAN KAYAN MU 

 CNC Router Machines 

Zhong Hua Jiang CNC injunan na'ura mai ba da hanya tsakanin hanyoyin sadarwa, ciki har da model kamar 3018, 3020, 3040, da 6090, an ƙera su don sassaka, yankan, da machining daidai.

 CNC Spindle Motors 

Motocin mu masu sanyaya iska da masu sanyaya ruwa an tsara su don masu amfani da hanyoyin CNC da injunan sassaƙa suna buƙatar jujjuyawar juyi, daidaito, da dorewa.

 CNC Na'urorin haɗi 

Har ila yau, muna ba da na'urorin haɗi na CNC kamar ƙayyadaddun sauyawa, Z bincike, maɓallan dakatarwa na gaggawa, da kuma abubuwan da ke da alaka da wutar lantarki don aikin injin CNC.

 Wayoyin Lantarki 

Wuraren mu na lantarki ya haɗa da igiyoyin sarƙoƙi masu kariya da igiyoyi masu garkuwa biyu waɗanda aka tsara don rage tsangwama na sigina da goyan bayan ingantattun na'urori.

 Motocin Stepper 

Motocin mu na stepper suna ba da madaidaicin iko don injunan CNC, kayan aiki na atomatik, da sauran tsarin sarrafa motsi.

 TABBATAR DA KYAKKYAWAR KYAUTA 

 GASKIYAR KWASTOMAN 

 FAQ 

Menene Waya Garkuwan Sarkar Wutar Lantarki 18 Gauge 4 da ake amfani da ita?

Ana amfani da shi don injunan CNC, tsarin sarkar ja, kayan aiki na atomatik, na'urar sarrafa wutar lantarki, wiwi na mota, firikwensin firikwensin, da watsa siginar lantarki inda ake buƙatar sassauci da kariya ta EMI.

Me yasa za a zabi waya mai kariya maimakon waya mara kariya ta talakawa?

Wayar garkuwa tana taimakawa rage tsangwama na lantarki daga injina, VFDs, masu sarrafawa, da sauran na'urorin lantarki. Wannan yana da mahimmanci musamman don amincin sigina a cikin CNC da tsarin sarrafa kansa.

Shin wannan kebul ɗin madugu 18AWG 4 ya dace da ja da sarƙoƙi?

Ee. An ƙera kebul ɗin azaman madaidaiciyar sarkar lantarki mai kariya ta waya, yana sa ta dace da motsi masu ɗaukar igiyoyi da ja da sarƙoƙi a cikin injinan CNC da kayan aiki na atomatik.

Menene mahimman bayanai na wannan kebul mai kariya 18/4?

Kebul ɗin shine 18AWG tare da 4 murɗaɗɗen jagora, 300V rated ƙarfin lantarki, 80°C rated zazzabi, tinned stranded jan karfe shugaba, PVC rufi da jaket, da 8.0 ± 0.25mm jacket diamita.

Me yasa wannan waya mai karewa take amfani da jan karfen da aka danne?

Tagulla da aka ɗaure da kwanon rufi yana goyan bayan ɗawainiya mai kyau, ingantaccen solderability, juriya na iskar shaka, juriya na lalata, da mafi kyawun sassauci idan aka kwatanta da daskararrun madugu ko ƙananan kayan jagora.

Shin Zhong Hua Jiang zai iya ba da mafita ta waya mai kariya ta al'ada?

Ee. Za'a iya tattauna zaɓuɓɓukan al'ada don tsayin kebul, girman jagora, launi mai jagora, buƙatun garkuwa, marufi, da takamaiman buƙatun wayoyi na aikace-aikace.

Ta yaya zan nemi ƙididdiga don 18 Gauge 4 Conductor Garkuwar Sarkar Waya?

Kuna iya aika tsayin da ake buƙata, adadin, aikace-aikacen, buƙatun wutar lantarki, da yanayin sarrafa kebul zuwa ƙungiyar tallace-tallace ta Zhong Hua Jiang. Ƙungiyarmu za ta ba da shawarar mafita mai kariya ta waya mai dacewa don aikinku.

Game da Zhong Hua Jiang

An kafa shi a shekara ta 2000, Zhong Hua Jiang yana da fiye da shekaru 20 na gwaninta a cikin injinan zane-zane na CNC kuma ya fadada kewayon samfuransa don haɗawa da VFDs, injin sassaƙaƙƙiya, na'urorin haɗi na CNC, injin stepper, da samfuran wayar lantarki.