|
ER16 1.5KW Square An sanyaya
110V/220V
10000-24000 RPM
4.3kg
Iska yayi sanyi
ER16
1.5KW
8A
247X90X105mm
Zazzage littafin Zhong Hua Jiang 2025 Na'urar CNC router (PDF)
Zauren Zhong Hua Jiang ER16 1.5kW mai sanyaya iska Motar Spindle na CNC Kit ɗin ya haɗu da injin firam mai murabba'in murabba'i, injin mitar mitar 1.5kW (VFD), ER16 tarin tarawa da na'urorin haɗaɗɗun kayan haɗin gwiwar CNC na zirga-zirga, zane-zane da niƙa mai haske. An yi niyya don magina na'ura, tarurrukan CNC, masu rarrabawa da ƙwararrun masu siye suna tsara cikakkun haɓakar igiya.
Tsarin ER16 yana ɗaukar kewayon kayan aikin-shank da aka jera fiye da sigar ER11 akan wannan rukunin yanar gizon. Ana amfani da VFD da aka kawo don saitawa da sarrafa saurin sandal, yayin da injin sanyaya iska baya buƙatar keɓan famfo na ruwa ko tanki mai sanyaya don sanyaya sandal.
Ana siffanta saitunan ƙarfin lantarki da ake da su a matsayin 110V da 220V, tare da kewayon saurin da aka buga na 10,000-24,000 RPM. Ya kamata masu siye su tabbatar da madaidaicin ƙimar shigarwar VFD, farantin suna da zaɓin wutar lantarki kafin yin oda ko haɗa kit ɗin.
Nemi ER16 Farashi na Kit ɗin Spindle
| Ƙayyadaddun | bayanan da aka buga |
|---|---|
| Ƙarfin motsin motsi | 1.5kW (1500W) |
| Motar zane | Square, injin sanyaya iska CNC spindle motor |
| Collet dubawa | ER16 |
| Wurin sauri | 10,000-24,000 RPM |
| Zaɓuɓɓukan wutar lantarki | 110V / 220V iri; tabbatar da zaɓaɓɓen igiya da ƙimar VFD |
| Ƙididdigar halin yanzu | 8A (jerin duba samfurin) |
| Mitar spinle | 400Hz (aiki mai tsayi mai tsayi; saita VFD daidai) |
| Nauyin Spinle | 4.3kg (nauyin motar da aka buga; ba duka nauyin jigilar kaya ba) |
| Girman spinle | 242 × 90 × 105mm a cikin teburin kayan aikin kit; nemi zanen shigarwa na yanzu |
| Injin da aka nufa | CNC na'ura mai ba da hanya tsakanin hanyoyin sadarwa da kayan zane; Dole ne a tabbatar da shigarwa da haɗin gwiwar mai sarrafawa |
Don shigarwa na inji, nemi zane mai girma na yanzu: siffar samfurin da aka buga ya lissafa ɗan tsayin gaba ɗaya daban daga teburin kit. Duk saitunan VFD da haɗin lantarki dole ne su dace da zaɓaɓɓen motar da wadatar gida.
Daidaitaccen tsarin kit ɗin da ke ƙasa yana bawa masu siye damar tabbatar da iyakar wadata kafin yin oda.
| Cikakkun bayanai masu yawa | / kit |
|---|---|
| 1× | 1.5kW murabba'in iska mai sanyaya madaurin hannu |
| 1× | 1.5kW VFD inverter |
| 13× | ER16 collets (jerin girman jeri: 1-10mm) |
| 10× | Haɗa rago (jera: 0.8-3mm, 1/8-inch shank) |
| 1× | Wayar jirgin sama |
| 1× | Wutar wutar lantarki |
| 4× | Wrenches |
| Girman Motar Spindle: 242 × 90 × 105mm (9.5 × 3.5 × 4.1in), kamar yadda aka jera don wannan saitin kit ɗin. | |
| Nauyin Mota: 4.3kg. | |
Jerin da aka jera ER16 kewayon kollet bai fayyace duk diamita guda 13 ba. Tabbatar da madaidaicin girman collet, ƙirar VFD, madaidaitan toshe/wayoyi da jerin kayan haɗi a cikin odar siyayya.
Tabbatar da Abubuwan da ke cikin Kit kuma Nemi Quote
Wannan murabba'in 1.5kW ER16 kit ɗin spindle an yi niyya ne don zanen na'ura mai ba da hanya tsakanin hanyoyin sadarwa na CNC, sarrafa bayanan martaba, yin alama da ayyukan niƙa masu dacewa da haske. Dacewar kayan aiki ya dogara da kayan aikin, abin yanka, taurin injin, hanyar kayan aiki da yanayin sanyaya.
Yi amfani da igiya don rubutun wasiƙa, sassaƙa sassaƙa, da sarrafa bayanan martaba a cikin katako da allunan da suka dace da itace. Zaɓi girman kayan aiki da ƙimar ciyarwa don kayan kuma tabbatar da cewa sandal ɗin ya kasance cikin ƙayyadaddun kewayon aiki.
Madaidaitan saitin CNC na iya amfani da sandal ɗin murabba'i ER16 don sassaƙawa, haruffa, ramummuka da bayanan martaba a cikin acrylic da sauran robobin injina. Fitar da guntuwar guntu, lissafin lissafi da sarrafa zafi suna da mahimmanci ga ƙarshen ƙarshen.
Mashin aikin haske na aluminium ko tagulla na iya yiwuwa akan isasshiyar na'urar CNC mai tsauri tare da kayan aiki masu dacewa, riƙewar aiki da sigogin yankan mazan jiya. Kit ɗin mashin ɗin ba madadin tabbatar da tsayayyen inji ko ƙarfin injina ba.
Tattauna Abubuwan CNC da Daidaituwar Spindle
An tsara hancin dunƙulewar hancin ER16 don ma'auni masu dacewa da ER16 . Kit ɗin ya jera tarin tarin tarin 13 wanda ke rufe kewayon 1-10mm na ƙima da raƙuman rawar soja 10 tare da ƙwanƙwasa 1/8-inch. Bincika kowane ƙugiya mai ƙunshe da ƙwanƙwasa da aka yi niyya kafin yin injina.
VFD 1.5kW da aka kawo an yi niyya don samar da daidaitaccen saurin sandal a cikin kewayon motar 10,000-24,000 RPM. Daidaita ƙarfin fitarwa na inverter, motsi na yanzu, mitar aiki da saitunan hanzari zuwa madaurin suna da littafin inverter.
Jikin murabba'in yana ba da damar hawa zuwa tsarin CNC masu jituwa ba tare da famfo mai sanyaya ruwa ba, hoses da tanki da ake buƙata ta sandar mai sanyaya ruwa. Dole ne mashigai na iska da kantuna su kasance a sarari kuma tsarin hawa dole ne ya dace da zanen motar.
Inda mai kula da CNC da VFD da aka zaɓa suna ba da tashoshi masu dacewa, umarnin sauri da farawa / dakatarwa ana iya daidaita su ta hanyar haɗin VFD mai dacewa. Tabbatar da abubuwan sarrafawa GRBL , ƙasa, keɓewar sigina da sigogin VFD kafin shigarwa; dacewa ba ta atomatik ga kowane mai sarrafawa ba.
Samfurin yana bayyana sandal mai ɗaukar nauyi huɗu da daidaitacce mai jujjuyawa wanda aka yi niyya don tallafawa barga mai saurin aiki. Hotunan runout da aka buga suna nuna sakamakon samfurin ƙasa 0.005mm; ainihin runout ya dogara da matsayin ma'auni, collet, kayan aiki, taro da hanyar gwaji. Nemi bayanan dubawa masu dacewa don aikace-aikacen samarwa-mafi mahimmanci.
Wayar jirgin sama da aka haɗa, wayar wutar lantarki da ƙugiya huɗu suna goyan bayan shigarwa na inji da canje-canje na kayan aiki na yau da kullun. ƙwararrun ma'aikata ne su yi aikin shigar da wutar lantarki da ƙaddamar da VFD ta hanyar ƙwararrun ma'aikata tare da shimfidar ƙasa mai dacewa, kariya da duban sigar mota.
Ana amfani da daidaitawa mai ƙarfi don taimakawa rage girgizar igiya yayin zane-zane mai saurin gaske da kuma kewayawa. Haƙiƙa amo, saman gama da kwanciyar hankali aiki kuma ya dogara da bearings, workpiece hawa, abun yanka geometry da CNC inji frame.
An kwatanta sandar murabba'in murabba'i ER16 kamar yadda ake amfani da ingantattun beran ƙarfe huɗu da ƙirar iska mai jan ƙarfe. Yanayin ɗaukar nauyi da rayuwar sabis sun dogara da kaya, sake zagayowar aiki, zafin aiki, bayyanar ƙura da kiyayewa; babu tsayayyen rayuwar rayuwar sabis da aka tabbatar don kowane shigarwa.
Hotunan kwatancen da alkaluma sun kwatanta ma'auni na samfurin da masana'anta suka bayyana; waɗannan dabi'un ba su maye gurbin rahoton binciken gudu don takamaiman sandar da aka kawo ba.
| Zhong Hua Jiang Spindle Motor | Reference Spindle Motor |
|---|---|
 |
 |
| Buga misali runout: kasa da 0.005mm. | Misalin da aka buga: kusan 0.05mm. |
Gidan gado yana amfani da matsayi masu hawa kan murabba'in jiki. An bayyana VFD a matsayin wanda aka riga aka tsara shi. Tabbatar da ainihin saitunan siginar sadar sa, jagorar jujjuyawar mota da tsaida hali kafin fara samarwa.
Nemi Zane-zanen Spindle da Bayanin VFD
Daidaitaccen tsarin kit ɗin da aka kwatanta a sama ya haɗa da motar, 1.5kW VFD, collets, raƙuman ruwa, wiring da wrenches. Ya kamata a tabbatar da marufi na kariya da shirye-shiryen jigilar kaya na ƙasa da ƙasa don ƙarar oda da ake buƙata da kuma makoma.
Masu rarrabawa da masu siyan OEM na iya buƙatar cikakkun bayanai don zaɓin ƙarfin lantarki, raka'o'in tattara kaya, alamar alama da kayan haɗi. Samar da kasuwan da kuka nufa, nau'in mai sarrafa CNC da adadin oda da ake tsammanin don taimakawa gano daidaitaccen tsari.
Nemi Babban Farashi da cikakkun bayanai na tattarawa
Kwatanta ikon igiya, girman collet ER, murabba'i ko zagaye gidaje, buƙatun mai sarrafawa da haɗa kayan haɗi kafin zaɓin kit ɗin dunƙule na CNC. Zaɓuɓɓukan da ke ƙasa su ne saitin samfur daban.
Kit ɗin sandar 500W keɓantaccen tsarin ƙaramin ƙarfi ne. Tabbatar da injin sa da nau'in sarrafawa maimakon ɗauka yana amfani da tsarin 1.5kW AC VFD iri ɗaya.
Huajiang ya bayyana cewa kasuwancin sa na CNC na kera motoci ya fara ne a cikin 2000 kuma daga baya ya faɗaɗa zuwa injunan mitar mitoci da injinan sassaƙa CNC. An gabatar da alamar Zhong Hua Jiang a cikin 2018.
Kamfanin ya bayyana masana'anta da fitar da injinan sandar CNC da kayan aikin injin da ke da alaƙa ga abokan cinikin duniya. Har ila yau, ya ba da misali mai sanyaya iska mai sanyaya wutar lantarki, mai lamba 200730184245.5. Masu saye na iya buƙatar tallafin lamban kira da takaddun samfur don bayanan siyan su.
Tuntuɓi mai kera Spindle Manufacturer na CNC
 |
||
| Kula da inganci Hanyoyin dubawa da samfurori kafin jigilar kaya. |
Takaddun shaida Akwai bayanin ikon mallakar masana'anta don bincike. |
Kwarewar Mai masana'anta CNC spindle Motors, VFDs da CNC inji aka gyara. |
 |
||
| Samar da Masana'antu-kai tsaye Bayanan farashi da ƙididdiga don ƙwararrun masu siye. |
Goyon bayan sana'a Taimako don shigarwa da tambayoyin sanyi na samfur. |
Haɗin kai zuwa fitarwa Shirye-shiryen jigilar kaya da sabuntawar oda bisa ga abin da aka yarda. |
Bincika ƙaƙƙarfan tsarin na'ura mai ba da hanya tsakanin hanyoyin sadarwa na CNC da injuna masu girma, gami da 3018, 3020, 3040 da iyalai samfurin 6090, bisa ga yankin aiki da buƙatun aikace-aikace.
Zaɓi fasahar sandal bisa ga buƙatun wutar lantarki, hawan inji, buƙatun sanyaya, zagayowar aiki da kayan aiki.
Na'urorin haɗi sun haɗa da abubuwan sarrafawa da na'ura kamar ƙayyadaddun sauyawa, Z bincike, na'urorin dakatar da gaggawa da igiyoyi masu kariya don shigarwar CNC masu dacewa.
Zaɓuɓɓukan mota na Stepper suna ba da matsayi na CNC da aikace-aikacen motsi masu alaƙa; zaɓi injin da aka ƙididdigewa da direba don axis ɗin injin da ake buƙata.
Ana ba da takaddun da aka nuna anan don tunani. Idan ana buƙatar takaddun shaida, sanarwa ko takamaiman daftarin aiki na kasuwa, nemi shaidar da ta dace da ainihin motar, VFD da kasuwar makoma.
Abubuwan da aka nuna na abokin ciniki sun shafi Zhong Hua Jiang CNC samfuran dunƙule; Bukatun aikace-aikacen da sakamako na iya bambanta ta hanyar daidaitawar igiya da injin CNC.
Jerin fakitin da aka buga ya ƙayyadad da sandal mai murabba'in 1.5kW guda ɗaya, VFD 1.5kW ɗaya, ƙwanƙwasa 13 ER16 , ɗigogi 10, waya ta jirgin sama ɗaya, wayar wuta ɗaya da maƙallan wuta guda huɗu. Tabbatar da ainihin masu girma dabam da samfurin inverter da aka kawo tare da zance.
Wannan sigar tana amfani da ƙa'idar haɗin gwiwa ta ER16 kuma tana da jeri na kewayon collet na 1-10mm. ER11 da kuma ER16 guraben karatu daban-daban ne; duba ma'auni na yanke-shank da mahallin motar kafin zaɓin kit.
Ee. Kit ɗin da aka jera ya haɗa da inverter 1.5kW VFD. Tabbatar da ƙarfin shigarwa, samfuri, tashoshi masu sarrafawa da saitunan aiki don wadatar gida da mai sarrafa CNC.
Gudun aiki da aka buga shine 10,000-24,000 RPM. An siffanta sandar a matsayin ƙirar mitoci mai girma na 400Hz, kuma dole ne a saita VFD bisa ga daidaitaccen farantin suna da ƙayyadaddun motoci.
Samfurin yana ba da saitunan 110V da 220V. Ya kamata a kula da waɗannan azaman zaɓuɓɓukan oda, ba azaman izinin haɗa mota ɗaya ko VFD ba tare da nuna bambanci ga ko dai wadata ba. Tabbatar da tsari da umarni na waya.
Teburin kunshin ya faɗi 242 × 90 × 105mm da 4.3kg. Wani keɓantaccen ƙayyadaddun samfur yana lissafin ɗan ɗan bambanta tsayin gabaɗaya, don haka sami sabon zanen shigarwa kafin yin mashin ɗin hawa.
Kunshin ya jera tarin tarin tarin yawa 13 ER16 a cikin kewayon 1-10mm da aka bayyana. Ba a ba da ƙarin ƙarar ɗaiɗaikun a cikin tebur ba; Nemi madaidaicin raguwar girman idan kayan aikin ku suna buƙatar takamaiman diamita.
Jerin kit ɗin yana gano raƙuman rawar soja guda 10 da aka kwatanta da 0.8–3mm tare da ɓangarorin 1/8-inch, tare da wrenches huɗu. Tabbatar da madaidaitan masu girma dabam da nau'ikan kayan aiki a cikin tabbatarwa.
Waɗannan an jera aikace-aikacen don saitin CNC masu jituwa. Sakamako sun dogara da yanke zaɓin kayan aiki, ciyarwa da sauri, halayen kayan aiki, ƙura ko sarrafa guntu da taurin injin.
Mai sayarwa yana gano kayan aikin ƙarfe mai laushi mai laushi azaman aikace-aikace mai yuwuwa. Tabbatar da rigidity na injin CNC, kayan aikin da suka dace, riƙewar aiki, yankan sigogi da sake zagayowar aikin da ake tsammani don takamaiman aikin ku.
Yana iya haɗawa lokacin da mai sarrafawa ya ba da siginar sarrafa VFD masu dacewa kuma zaɓin inverter yana ba da abubuwan sarrafawa masu dacewa. Tabbatar da farawa/tsayawa, sarrafa sauri, keɓewa da buƙatun waya kafin siye.
Ba a buƙatar famfo mai sanyaya ruwa na waje ko tafki mai sanyaya don sanyaya igiya. Kiyaye hanyoyin iskar motar a sarari kuma bi umarnin shigarwa da kulawa.
An bayyana VFD a matsayin wanda aka riga aka tsara shi. Tabbatar da sigogin inverter da aka kawo kuma tabbatar da jujjuyawa, ƙarfin lantarki, halin yanzu, mita da saitunan kariya yayin ƙaddamarwa.
Kwatancen kwatancen yana ba da rahoton ƙimar samfurin ƙasa 0.005mm. Don takamaiman siyan, nemi ƙayyadaddun runout da hanyar auna sa, wuri da yanayin dubawa.
Zhong Hua Jiang yana maraba da masu rarrabawa, masu yin injina da masu siyar da kaya. Raba daftarin wutar lantarki da ake buƙata, adadin, wuri, marufi da buƙatun fasaha don neman ƙa'ida ta yau da kullun.
Mai sana'anta ya tattauna zaɓuɓɓukan OEM/ODM da ke rufe alamar, marufi, ƙarfin lantarki da sauran buƙatu. Ya kamata a amince da yuwuwar aikin injiniya, zaɓuɓɓukan sassa da sharuɗɗan kasuwanci don kowane aiki.
Mai siyarwar ya faɗi cewa ana iya ɗaukar ƙananan odar gwaji don daidaitattun kayan aiki. Ana tattauna adadin ƙididdigewa ko oda mai yawa bisa ga tsarin da aka nema da zance.
Jagoran da aka buga yana faɗi kusan kwanakin aiki 3-7 don daidaitaccen daidaitawa bayan biyan kuɗi da kwanaki 10-20 don manyan ko umarni na musamman. Waɗannan lokuttan samarwa ne masu nuni, ba tabbacin kwanakin isowa ba; tabbatar da jadawalin yanzu da hanyar jigilar kaya.
An bayyana garantin watanni 12 da goyan bayan fasaha mai gudana don sandal, VFD da samfuran da ke da alaƙa. Tabbatar da ɗaukar hoto, keɓancewa, hanyoyin sabis da sharuɗɗan mayewa a cikin yarjejeniyar siyarwa ta ƙarshe.
Ƙayyade 110V ko 220V, samfurin mai sarrafa CNC, da ake buƙata ER16 girman collet, zanen hawan inji, kayan da aka yi niyya, adadi, ƙasar jigilar kaya da kowane buƙatun marufi na OEM. Waɗannan cikakkun bayanai suna taimakawa gano daidaitawar kit ɗin da ta dace.
