|
ER11 Kit ɗin Sanyin Ruwa 65mm 1.5KW
110V/220V
10000-24000 RPM
3.6kg
Ruwan Sanyi
ER11
1.5KW
8A
Ф65mm*268mm
Na'urar CNC router Kasidar 2025.pdf
Zhong Hua Jiang ER11 65mm 1.5KW ruwa mai sanyaya ruwan leda mai motsi VFD kit shiri ne don girka maganin sandar CNC don sassaka, sassaƙa, sassaƙa, da niƙa haske. Kit ɗin ya haɗu da Φ65mm 1.5KW mai sanyaya ruwa mai sanyaya motar motsa jiki tare da madaidaicin 1.5KW VFD inverter, ƙwanƙwasa dutsen, famfo na ruwa, bututun ruwa, ER11 collets, raƙuman ruwa, waya ta jirgin sama, waya mai ƙarfi, da wrenches.
Wannan 1.5KW CNC spindle motor kit an tsara shi don masu amfani da hanyoyin CNC, injin CNC na tebur, injin zane, injinan katako, tsarin yankan acrylic, zanen PCB, da kuma samar da karamin bita. Yana goyan bayan tsayayyen aiki na 10,000-24,000 RPM kuma yana taimakawa masu ginin injin rage lokacin girbi ta hanyar karɓar sandal, inverter, sassa masu sanyaya, da na'urorin haɗi a cikin kunshin da suka dace.
Don masu siyar da B2B, masu rarrabawa, masu ginin injin OEM, da ƙwararrun masu amfani da CNC, ER11 1.5KW ruwa mai sanyaya kayan motsa jiki yana ba da ƙaramin girman, aiki mai shiru, amintaccen sanyaya ruwa, ingantaccen sarrafa saurin gudu, da shigarwa mai dacewa. Ana ba da VFD a matsayin wani ɓangare na kit ɗin don sauƙaƙe saitin saurin igiya da haɓaka ingantaccen haɗin kai.
Zhong Hua Jiang yana goyan bayan odar samfuri, siyayya mai yawa, gyare-gyaren OEM, haɗin gwiwar masu rarrabawa, da wadatar fitarwa don kayan injin injin CNC. Masu siye za su iya neman goyan bayan fasaha don wayoyi, saitin sigar VFD, daidaita madaidaicin sanda, da haɗin injin CNC.
Ƙayyadaddun kayan aiki sun haɗa da Φ65mm 1.5KW ruwa mai sanyaya motar motsa jiki, 1.5KW VFD inverter, Φ65mm madauri Dutsen, 110V ruwa famfo, 5-mita ruwa tiyo, ER11 collets daga 1mm zuwa 7mm, rawar soja rago daga 0.8mm zuwa 8-inch, wutar lantarki da waya shank maƙarƙashiya. Girman jikin spindle shine Φ65mm × 267mm tare da kusan nauyin 3.6kg spindle nauyi, dace da 10,000-24,000 RPM CNC zane da yanke.
| 1 x | Φ65mm 1.5KW Round Spindle Motor |
| 1 x | 1.5KW VFD Inverter |
| 1 x | Φ65mm Matsala Dutsen |
| 1 x | 110V Ruwa Pump |
| 1 x | Ruwan Ruwa na Mita 5 |
| 13x ku | Rukunin ER11 (1mm-7mm) |
| 10x ku | Haɗa Bits (0.8-3mm, 1/8 'Shank) |
| 1 x | Wayar jirgin sama |
| 1 x | Wutar wutar lantarki |
| 2x ku | Wrenches |
| Girman Motar Spindle: Φ65mm*267mm | |
| Nauyin Spindle: 3.6kg |
The ER11 65mm 1.5KW ruwa mai sanyaya ruwan leda injin VFD kit an gina shi don masu amfani waɗanda ke buƙatar ƙarami, shuru, da tsayayyen fakitin sandal na CNC tare da na'urorin haɗi masu dacewa. Zane mai sanyaya ruwa yana goyan bayan daɗaɗɗen machining fiye da ƙananan iska da aka sanyaya, yayin da tsarin ER11 yana ba da ingantacciyar matsewa ga ƙananan kayan aikin zane da yankan.
Inverter VFD da aka haɗa yana ba da damar daidaitawa da sauri don abubuwa daban-daban da ayyukan injin. Tare da sandal, inverter, kayan sanyaya, collets, wiring, da wrenches da aka kawo tare, wannan kit ɗin ya dace da haɓaka na'ura mai ba da hanya tsakanin hanyoyin sadarwa na CNC, taron injin OEM CNC, maye gurbin bita, da safa mai rarrabawa.
Zhong Hua Jiang ER11 65mm 1.5KW Mai sanyaya Ruwan Spindle Motor yana da tsarin sarrafawa mai hankali kuma an tsara shi don aiki mai sauƙi, mai sauƙin amfani, dacewa da masu amfani da kowane matakan fasaha.
Wannan Φ65mm zagayen injin leda mai sanyaya ruwa tare da ER11 collet chuck. Yana ba da wutar lantarki 1.5KW, yana goyan bayan kewayon saurin 10,000-24,000 RPM, kuma yana samun runout ƙasa da 0.005mm. An sanye shi da ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙarfi guda huɗu har zuwa tsawon rayuwa na 3 × fiye da daidaitattun samfura, yana haɗa fasahar daidaita ƙarfin ci gaba don ƙaramar amo da girgiza.
Tsarin da aka sanyaya ruwa yana samar da kyakkyawan zafi mai zafi, ƙananan yanayin aiki mai mahimmanci, da kuma aikin da ya fi natsuwa, yana sa ya dace don dogon lokaci, zane-zane mai mahimmanci da yankewa.
Zhong Hua Jiang ER11 1.5KW Quiet Motar Spindle Mai Sanyaya da Ruwa kit yana da tsarin sarrafa hankali, wanda aka ƙera shi don sauƙin aiki, yana mai da shi ga masu amfani da duk matakan fasaha.
An sanye shi da ƙwanƙwasa ER11 , yana tabbatar da riƙon kayan aiki, ƙarancin gudu, da ingantattun mashin ɗin don daidaitaccen sakamako.
Haɗe-haɗe tare da dacewa mai sarrafa dabaru (PLC), yana ba da damar gyare-gyare mai sauƙi don saurin (10,000-24,000 RPM) da sauran sigogi don dacewa da buƙatun ayyuka daban-daban.
Duk kayan aikin lantarki, masu goyan bayan 110V / 220V da 8A halin yanzu, an sanya su don kwanciyar hankali da aminci, tabbatar da aiki mai dorewa.
Yana da madaidaicin sarrafa saurin gudu tare da kewayon 10,000-24,000 RPM, yana ba da damar aiki mai santsi da daidaito don aikace-aikacen CNC iri-iri.
Tsarin sanyaya ruwa na musamman da aka ƙera (Φ65mm spindle body) yana tabbatar da ingantaccen ɓarkewar zafi tare da rage amo , haɓaka karko da aiki don tsawaita ayyukan CNC.
Ƙirƙirar fasaha & ci gaba mai ƙarfi daidaita fasaha
Yadda ya kamata rage amo
Ƙara kwanciyar hankali a cikin tsarin aiki
Ingantattun pcs 4 da aka haɓaka
Maɗaukakin ƙarfin ƙarfin ƙarfe bearings
Duk wani tsayin ƙarfe na rotor
Rayuwar aiki na iya kaiwa shekaru 2 don 8 hours / day
| Motar mu ta Spindle | Sauran Motar Spindle |
 |
 |
| Gudun gudu kasa da 0.005mm | Tsawon 0.05mm |
Ƙarin sarrafawa don injin spindle
Gudun gudu daga cikin injin ɗin ya zama ƙasa da 0.005mm
Madaidaicin sau 10 fiye da injin tukwane na al'ada
SAU 10 GASKIYA YA KASHE
An sanye shi da waya ta jirgin sama da aka riga aka siyar da wayar wuta don shigarwa cikin sauri
AN SHIRYA VFD
Ko kai mai sha'awar sha'awa ne ko ƙwararriyar taron bitar CNC, muna da ingantacciyar hanyar Zhong Hua Jiang mai sanyaya ruwa a gare ku. Motocin mu masu sanyaya ruwa suna goyan bayan ayyuka da yawa, daga sassauƙan zane-zane zuwa yankan ayyuka masu nauyi, dacewa da matakan fasaha daban-daban. Idan daidaitaccen tsari bai dace da bukatunku ba, da fatan za a iya tuntuɓar ƙwararrun masu siyarwar mu don keɓance cikakkiyar maganin injin sandar ruwa mai sanyaya don ayyukanku.
Bayan Zhong Hua Jiang 1.5KW ER11 kit ɗin motar motsa jiki mai sanyaya ruwa, muna ba da nau'ikan nau'ikan injinan sanyaya ruwa iri-iri don dacewa da buƙatun aikin CNC daban-daban. Jigon mu ya haɗa da 2.2KW ruwa mai sanyaya kayan kwalliyar motar motsa jiki don zane-zane mai girma da yankan itace, acrylic, da ƙarfe mai laushi, 3KW ruwa mai sanyaya kayan motsa jiki don ayyukan ƙwararru, da ƙwararrun zaɓuɓɓukan sandal mai sanyaya iska don haɓaka haɓakawa.
An kafa Huajiang a cikin 2000, farawa a cikin samar da injinan zane-zane na CNC, sannan fadada samarwa zuwa VFD ( Na'urar Sarrafa Mitar Sauyawa (VFD) ) da injunan zane.
Don bincika da haɓaka ƙarin kasuwa, mun kafa Brand ' Zhong Hua Jiang' akan 2018.
Mun yi rajistar haƙƙin mallaka don jerin injin mu na sanyaya iska. Alamar lamba: 200730184245.5.
Muna da shekaru 20 gwaninta masana'antu a cikin wannan filin.
Mun kasance muna fitar da samfuran mu zuwa ko'ina cikin duniya ciki har da sanannen kamfani a Amurka da Jamus.
 |
||
Tabbacin inganciBabban ingancin aiki Ƙuntataccen kula da inganci |
Takaddun shaida da Takaddun shaidaHalaye da yawa don sanyaya iska spindle Motors |
Ƙarin Ƙimar AlamarAn gane ƙimar alama sosai ta kasuwa |
 |
||
Madaidaicin FarashinTallace-tallacen masana'anta kai tsaye Ayyukan farashi mai yawa |
Cikakken SabisƘwararrun goyon bayan fasaha Kusa da sabis na abokin ciniki mai sauri |
Gaggauta Isar da Abin dogaroBayarwa mai sauri da inganci Sa ido na ainihi da sabuntawa |
Injin na'ura mai ba da hanya tsakanin hanyoyin sadarwa na zamani na Zhong Hua Jiang CNC na zamani, gami da samfura kamar 3018, 3020, 3040, da 6090, suna ba da garantin daidaito, inganci, da aminci, masu mahimmanci don zane-zane mai inganci da yanke ayyukan.
Ƙaddamar da ayyukan CNC ɗin ku tare da ingantattun injunan ledoji, gami da sanyayawar iska da zaɓuɓɓukan sanyaya ruwa, waɗanda aka ƙera don saduwa da ƙaƙƙarfan ƙa'idodin aiki don abubuwa daban-daban.
Haɓaka ayyukan CNC ɗin ku tare da ingantattun na'urorin haɗi na mu, kamar ƙayyadaddun sauyawa, Z binciken, da maɓallan tsayawa na gaggawa, cikakke don tabbatar da aminci da daidaito.
Tabbatar da amintaccen haɗin gwiwa da aminci tare da igiyoyin mu masu garkuwa biyu da igiyoyin sarƙoƙi masu kariya, waɗanda aka tsara don rage tsangwama na sigina da haɓaka dorewa.
Fitar da injin ku na CNC tare da ingantattun injinan stepper ɗinmu, suna ba da ingantaccen sarrafawa da aiki mai ƙarfi don daidaiton sakamakon aikin.
Kit ɗin ya haɗa da Φ65mm 1.5KW zagaye ruwa mai sanyaya motar motsa jiki, inverter guda 1.5KW VFD, Dutsen madauri na Φ65mm, famfo ruwa 110V guda ɗaya, bututun ruwa mai tsayin mita 5, ER11 collets daga 1mm zuwa 7mm, raƙuman ruwa daga 0.8mm zuwa 3mm, igiya daga 0.8mm zuwa 3mm waya guda biyu.
Wannan kit ɗin ya dace da masu amfani da hanyoyin CNC, injinan zane-zane, injin CNC na katako, injin CNC na tebur, injin yankan acrylic, injin zane na PCB, da ƙananan tsarin CNC na bita waɗanda ke buƙatar ƙaramin Φ65mm ruwa mai sanyaya sandal tare da sarrafa saurin VFD.
Motar sandar itace Φ65mm 1.5KW ruwa mai sanyaya ruwa na CNC tare da haɗin gwiwa ER11 , kewayon saurin 10,000 – 24,000 RPM, ƙaramin zagaye na jiki, da kusan nauyin 3.6kg spindle. An jera girman jikin sandar a matsayin Φ65mm × 267mm a cikin ainihin tebur takamaimai.
Motar sandal mai sanyaya ruwa yana ba da tsayayyen ɓata zafi, ƙarancin ƙarar aiki, da mafi kyawun aiki na dogon lokaci. Inverter VFD mai daidaitawa yana sauƙaƙe sarrafa saurin sauri kuma yana taimaka wa masu amfani su haɗa igiyar igiya cikin masu amfani da CNC tare da ƙarancin dacewa.
Shafin ya bayyana cewa an tsara VFD. Masu saye yakamata su tabbatar da wutar lantarki na gida, wayoyi, sanyaya wurare dabam dabam, da saitunan siga kafin aiki don tabbatar da amintaccen shigarwa da ingantaccen aikin sandal.
Ee. 1.5KW ER11 Kit ɗin motar motsa jiki mai sanyaya ruwa ya dace da zane da yankan haske akan itace, acrylic, MDF, robobi, allon PCB, PVC, plexiglass, da injin ƙarfe mai laushi kamar aluminum ko tagulla lokacin da suka dace da kayan aikin da suka dace, ciyarwa, gudu, da yanayin sanyaya.
Ee. Zhong Hua Jiang yana goyan bayan odar samfuri, siyayya mai yawa, haɗin gwiwar masu rarrabawa, alamar OEM, gyare-gyaren marufi, da tallafin fasaha don masu ginin injin CNC da masu siyarwa.
Zhong Hua Jiang yana ba da garanti na watanni 12 don injunan igiya, masu canza wuta, da na'urorin haɗi, tare da tallafin fasaha don shigarwa, saitin sigar VFD, wayoyi, warware matsala, da zaɓin samfur.
