Views: 0 Author: Sayt Ɛditɔ Pɔblish Taym: 2026-08-21 Ɔrijin: Ples
Choosing di rayt CNC spindle motor saiz impɔtant fɔ top pefɔmɛns ɛn matirial kɔmpatibiliti. Fɔ bɔku pan di aplikeshɔn dɛn, yu go fɛn dɛn spindle moto rɛnj ya we dɛn kin rɛkɔmɛnd:
Aplay fɔm |
Motor Saiz Rɛnj (kW) . |
Notis dɛn |
|---|---|---|
Wok wit wud (plai wud, MDF, 2D/3D we dɛn kɔt) |
1,5 kW – 3,5 kW |
Gud tork, prɛsishɔn finish |
Sayn-mɛkin, kabinɛt shɔp dɛn |
2,2 kW – 5,5 kW |
Sɔpɔt lɔng saykl dɛn, stebul spid |
Layt mɛtal mil (aluminiɔm, bras) . |
2,2 kW |
Kwayɛt, kol fɔ lɔng lɔng rɔn |
Industrial furniture & panɛl prɔsesin |
5,5 kW – 7,5 kW |
High torque, prodakshɔn rilaybiliti |
Hobby CNC (PCB, akrilik, MDF mɔdel dɛn) |
0,8 kW – 1,5 kW |
Kɔmpakt, i nɔ de tek bɔku mɔni |
Yu nid di kɔrɛkt spindle saiz fɔ mach yu prɔjek in nid dɛn. As wan lida CNC spindle moto manifakta, Zhong Hua Jiang de deliver rilibul sɔlvishɔn wit wan wayd prodak rɛnj ɛn dip industri ɛkspɛriɛns.
We yu pik di rayt spindle saiz fɔ yu cnc mashin, yu sɛt di fawndeshɔn fɔ prɛsis kɔt ɛn efishɔnal prodakshɔn. Di spindle saiz de impak dairekt wan aw yu kin kɔt difrɛn matirial dɛn fayn fayn wan, frɔm wud to aluminiɔm. If yu yuz di rɔng sayz, yu go si se di say nɔ fayn ɔ ivin di tul brok.
Inkris spindle rpm kin ridyus surface roughness, we min se yu get wan smol finish pan yu wokpiece.
Di rayt sayz fɔ spindle de mek shɔ se yu gɛt inof tɔk ɛn ɔspaw fɔ kɔt ebi ebi, mɔ we yu de wok wit taf matirial dɛn.
Di spindle saiz ɛn di shank taper fɔ mach di wet ɛn lɔng we yu kɔt tul dɛn gɛt. Dis mats de ɛp yu fɔ avɔyd fɔ vayb ɛn fɔ mek yu kɔntinyu fɔ du di rayt tin.
Fɔ kɔt had matirial dɛn wit ay spid, wan big spindl taper de sɔpɔt di ekstra fɔs we dɛn nid.
Zhong Hua Jiang dɔn divɛlɔp advans spindl mכta dεm we de adrεs dεn sayzin chalenj dεm ya. Dɛn risach ɛn inovashɔn de ɛp yu fɔ gɛt di bɛst rizɔlt fɔ ɛvri matirial.
Yu fɔ tink bɔt pawa, rpm, ɛn kol we yu de pik spindle saiz fɔ yu cnc prɔjek dɛn. Dɛn tin ya kin afɛkt di spid we dɛn kin kɔt, di layf we di tul kin liv, ɛn di wan ol efyushɔn. di spindl pawa we ay pasmak de mek yu ebul fɔ inkrisayz di rit we yu de pul di matirial, bɔt i de mek yu yuz ɛnaji bak. As yu de inkrisayz radial imɛshɔn, di chip lod na di kɔt ed de gro, we min se yu nid mɔ pawa fɔ ɛni kɔt. Kulin sistem, lɛk dizayn dɛn we dɛn kin kɔl wit ɛya ɔ we dɛn kin kɔl wata, kin ɛp fɔ manej ɔt we dɛn de du ay rpm ɔpreshɔn ɛn we dɛn de kɔt ebi ebi.
Na dis na wan kwik rɛfrɛns fɔ spindle saiz bay matirial:
Tayp fɔ di Matirial |
Rikɔmɛnd Spindle Motor Tayp |
Pawa (kW) . |
RPM we dɛn kɔl RPM |
Tayp fɔ kol |
|---|---|---|---|---|
Wudwok & Plastik |
Moto dɛn we gɛt ɛya kol, we gɛt smɔl pawa |
3 - 5. Di wan dɛn we de wok |
18,000 - 24,000 pipul dɛn |
Dɛn kin kol am wit ɛya |
Aluminium & Layt Mɛtal dɛn |
Wata-kul, mid-rɛnj pawa motoka dɛn |
5 - 10. Di wan dɛn we de wok |
10,000 - 20,000 pipul dɛn |
Dɛn kin kol am wit wata |
Stiɛl & Had Mɛtal dɛn |
Wata-kul, ay tork moto |
10+ pipul dɛn |
5,000 - 10,000 pipul dɛn |
Dɛn kin kol am wit wata |
Kɔmpɔzit Matirial dɛn |
Moto dɛn we gɛt ay spid, we nɔ gɛt bɔku tɔk |
4 - 6. Di wan dɛn we de wok |
20,000 - 30,000 pipul dɛn |
Dɛn kin kol am wit ɛya |
Yu kin trɔst Zhong Hua Jiang fɔ gi spindle saiz sɔlvishɔn dɛn we de mach yu cnc nid dɛn, ilɛksɛf yu pe atɛnshɔn pan ay-spid kɔt ɔ ebi ebi kɔt fɔ advans matirial dɛn.
We yu pik di rayt spindl pawa fɔ wud prɔjek dɛn, dat de mek shɔ se yu ebul fɔ kɔt klin, fɔ engrav fayn fayn wan, ɛn fɔ wok fayn fayn wan. Yu fɔ mach di spindl pawa to yu aplikeshɔn tayp ɛn di had we di wud at. Fɔ bɔku pan di wok dɛn we dɛn kin du fɔ wok wit wud, yu kin si di tebul we de dɔŋ ya:
Tayp fɔ Aplikeshɔn |
Rikɔmɛnd Spindle Pawa Rɛnj |
|---|---|
Hobi CNC router machine we yu lɛk fɔ du. |
1.5KW to 3.0KW |
CNC Wud Router |
2.2KW to 4.5KW |
Smɔl CNC router machine |
2.2KW to 3.0KW |
Yu nid ay spindle pawa fɔ kɔt had wud ɔ big-big prodakshɔn. Di spindl dɛn we gɛt ay pawa de gi di tɔk ɛn spid we dɛn nid fɔ kɔt dip ɛn fɔ mek dɛn ebul fɔ engrav di ebi ebi tin dɛn. Fɔ sɔft wud ɔ ditayla engraving, lɔwa spindle pawa de gi bɛtɛ kɔntrol ɛn prɛsishɔn. Ɔltɛm tink bɔt di kayn wud ɛn di kɔmplisiti fɔ yu prɔjek bifo yu disayd fɔ du sɔntin.
CNC router motor sizing fɔ wud projɛkt dipen pan sɔm impɔtant tin dɛn. Yu fɔ evalyu dɛn tin ya bifo yu pik yu spindle:
Di kayn motoka dɛn (we dɛn kin kol wit ɛya ɔ we dɛn kin kol wit wata) .
Torque rikwaymɛnt fɔ yu spɛshal kɔt
Di kayn tin dɛn we dɛn kin yuz fɔ mek wud (sɔft wud, had wud, kɔmpɔzit) .
Aplikeshɔn ɛn diuti saykl (kɔntinyu ɔ wan wan tɛm yus) .
Kompatibiliti wit yu kɔntrol sistem dɛn
We yu pik di rayt motoka, i de afɛkt yu cnc mashin in rilaybiliti ɛn valyu. Yu fɔ analayz ɛni aks, saiz di motoka dɛn ɛn di pawa transmishɔn kɔmpɔnɛnt dɛn, ɛn mek shɔ se di sistɛm mit wetin yu nid ɛn nɔ ɔvalod. Dis we fɔ du tin de ɛp yu fɔ avɔyd fɔ mek yu nɔ wok ɛn nɔ mek di mashin wok fayn. We yu pik ay-pawa spindl fɔ kɔt had wud, yu kin gɛt di abiliti fɔ du di dimand wok dɛn fɔ engrav ɛn kɔt wit kɔnfidɛns.
Yu kin maksimayz yu rizulyt pan wud wok bay we yu fala dɛn bɛst we ya:
Yuz ay-pawa spindl fɔ kɔt had wud ɛn dip engraving.
Pik spindl pawa bay di wud we at pas ɔl we yu plan fɔ kɔt.
Mek yu spindle kɔntinyu fɔ mek yu nɔ pwɛl bifo tɛm ɛn fɔ mek yu nɔ spɛn bɔku mɔni fɔ mek yu mentenɛns.
Pik spindles wit ay kwaliti bia fɔ bɛtɛ akkuracy, low vibration, ɛn lɔng savis layf.
Plan fɔ riplesmɛnt pat we de ɛn fɔ yuz ɛnaji fɔ mek dɛn nɔ gɛt bɔku prɔblɛm dɛn we kin apin we dɛn nɔ de wok.
Bearings de ple wan impɔtant pat pan yu spindle in pefɔmɛns. Ay kwaliti biɛrin dɛn kin mek yu rɔtin akkurayt, i kin mek yu nɔ shayk, ɛn i kin mek yu spindl liv lɔng. Yu fɔ put dɛn tin ya fɔs ɔltɛm we yu de pik spindl fɔ mek yu ebul fɔ kɔt wud ɛn kɔt.
We yu de wok wit aluminiɔm, yu nid fɔ pik di rayt spindl pawa fɔ mek yu gɛt klin, kɔrɛkt rizɔlt. Fɔ kɔt aluminiɔm nid mɔ tɔk ɛn stebiliti pas wud ɔ plastic. If yu yuz spindle we gɛt tu smɔl pawa, yu go risk fɔ mek yu nɔ fayn fɔ di say we yu de ɛn yu nɔ go west di tul. Fɔ bɔku pan di wok dɛn we yu kin du fɔ kɔt aluminiɔm, yu fɔ tink bɔt dɛn spindl pawa opshɔn dɛn ya:
Spindle Pawa (kW) . |
Aplay fɔm |
|---|---|
0.8 |
I fayn fɔ kɔt layt aluminiɔm |
1.5 |
Rikɔmɛnd fɔ kɔt dip dip wan |
1.25 hp we yu de yuz |
Alternativ opshɔn fɔ aluminiɔm wok |
Yu kin yuz 0.8 kW spindl fɔ layt aluminiɔm kɔt, lɛk fɔ engrav ɔ fɔ pas shalo. Fɔ dip kɔt ɔ mɔ dimand wok, 1.5 kW spindl de gi di ekstra tɔk ɛn stebiliti we yu nid. Sɔm yuza dɛn kin pik bak 1.25 hp motoka fɔ rili aluminiɔm kɔt pefɔmɛns. Ɔltɛm, mach yu spindle pawa to di tik ɛn hadnɛs fɔ yu aluminiɔm wokpies.
We dɛn kɔt di aluminiɔm, dat kin mek di ples wam, bɔt nɔto lɛk di mɛtal dɛn we at pasmak. Yu nid fɔ kip yu spindle kol fɔ mek i kɔntinyu fɔ kɔrɛkt ɛn fɔ mek di tul layf lɔng. Mɔs pan di aluminiɔm kɔt aplikeshɔn dɛn nid spindl spid we pas 10,000 RPM. Ay spindl spid de ɛp yu fɔ ebul fɔ kɔt smol smol ɛn i de mek di matirial nɔ stik to yu tul dɛn. Nɔ lɛk stɛl ɔ taytaniɔm, we nid fɔ mek wata ɔ flɔd kol, bɔku tɛm yu kin ebul fɔ manej aluminiɔm wit mist ɔ ɛya kol. Dis we fɔ du tin de mek yu spindl ɛn wokpies de na di rayt tɛmpracha we nɔ de mek yu sɛtup ɔva kɔmplikt.
Yuz spindl dɛn we dɛn kin kɔl wit ɛya ɔ we dɛn kin kɔl mist fɔ bɔku pan di wok dɛn we dɛn kin du fɔ kɔt di aluminiɔm.
Mentɛn spindle spid ɔp 10,000 RPM fɔ di bɛst rizɔlt.
Monitor spindle temperechur durin long kot saykl.
Fɔ pik di rayt motoka fɔ kɔt aluminiɔm nɔ jɔs min fɔ gɛt pawa. Yu fɔ tink bɔt di kayn spindle, di rigiditi fɔ yu CNC mashin, ɛn di sayz fɔ yu kɔt tul dɛn. Fɔ bɔku pan di aluminiɔm kɔt projɛkt dɛn, wan spindl we de na di 1.5 kW rɛnj de gi gud balans pan pawa ɛn kɔntrol. If yu plan fɔ kɔt tik tik aluminiɔm ɔ fɔ rɔn yu mashin fɔ lɔng tɛm, yu go bɛnifit frɔm wan spindl we gɛt ay pawa.
Na sɔm impɔtant pɔynt dɛn we go gayd yu fɔ pik:
Match spindle pawa to yu kot dip ɛn tul dayamita.
Pik wan spindl wit stebul bia fɔ ridyus di vaybreshɔn we yu de kɔt aluminiɔm.
Mek shɔ se yu CNC mashin freym kin ebul fɔ handle di ekstra fɔs frɔm ay-pawa spindl dɛn.
Selekt wan motoka we de sɔpɔt ɔl tu di ay RPM ɛn rilibul tɔk fɔ kɔt aluminiɔm.
Yu kin ajɔst prɛsis, efishɔnal aluminiɔm kɔt bay we yu pik di rayt spindl ɛn motoka kɔmbaynshɔn. Ɔltɛm kɔnsul yu CNC mashin in spɛsifikɛshɔn ɛn tink bɔt yu tipik prɔjek rikwaymɛnt dɛn bifo yu mek wan las disizhɔn.
We yu de wok wit akrilik, yu nid fɔ pik di rayt spindl pawa fɔ mek yu gɛt klin ɛn polish ed dɛn. Fɔ mɔs cnc aplikeshɔn, wan spindl wit 1.5 kW to 3.0 kW pawa de gi di bɛst rizɔlt. Dis rεnj de gi yu inof tכk fכ smol smol kכt witout risk fכ mεlt כ chip. Ha-pawa motoka dɛn kin ebul fɔ handle tik tik sheet ɛn lɔng prodakshɔn rɔn, bɔt yu fɔ mach di spindle pawa to yu prɔjek saiz ɛn di ditel lɛvɛl.
Tayp fɔ Aplikeshɔn |
Spindle spid (RPM) we dɛn kin kɔmɛnd . |
|---|---|
Intrikɛt Ditiɛl Wok |
16,000 - 18,000 pipul dɛn |
Jɛnɛral Kɔt ɛn Poket |
10,000 - 15,000 pipul dɛn |
Tik akrilik sheet (>12mm) |
8,000 - 12,000 pipul dɛn |
Yu fɔ chɛk yu spindle in rayt pawa ɛn spid ɔltɛm bifo yu bigin fɔ du nyu wok. Dis step de ɛp yu fɔ avɔyd fɔ ɔt pasmak ɛn mek shɔ se yu dɔn fayn fayn wan.
Spindle spid de ple wan impɔtant pat we yu de kɔt akrilik. Yu want fɔ yuz spindl spid bitwin 16,000 ɛn 18,000 RPM fɔ ditayla wok. Fɔ tin dɛn we tik, put di spid dɔŋ fɔ mek i nɔ mɛlt. Di rayt saiz we di kɔta gɛt impɔtant bak. Bɔku pipul dɛn we sabi du di wok kin tɔk se dɛn kin yuz wan flut ɔpkat bit dɛn we dɛn mek fɔ akrilik. Dɛn bit ya kin klia chips kwik kwik wan ɛn ridyus di ɔt we kin gɛda.
Yuz kabayd bit dɛn we nɔ gɛt kɔt fɔ mek i te ɛn fɔ mek di ed dɛn klin.
Fɔ klin kɔt, tray wan aluminiɔm bit wit spindl spid we na 16,000 RPM ɛn fid rit we na 80 inch pan minit.
Fɔ mek i nɔ mɛlt bay we yu yuz spindl spid we na 18,000 RPM ɛn fid spid we na 1500 mm/min.
Fɔ pik di rayt motoka fɔ akrilik prɔjek min fɔ balans di spindl pawa, spid, ɛn tul kɔmpitibliti. Wan 1.5 kW to 3.0 kW moto de gi yu fleksibiliti fɔ ɔl tu fayn fayn engravin ɛn dip kɔt. Mek shɔ se yu spindl sɔpɔt di spindle spid rɛnj dɛn we dɛn kin rɛkɔmɛnd fɔ akrilik. If yu plan fɔ wok wit difrɛn tin dɛn, pik wan spindl we gɛt ay pawa we go ebul fɔ ajɔst to difrɛn spid ɛn lod dɛn. Dis we fɔ du tin de mek shɔ se yu gɛt smol, chip-fri rizɔlt ɛvri tɛm we yu kɔt akrilik.
Yu nid fɔ pik di rayt spindl pawa fɔ plastic fɔ mek dɛn ebul fɔ kɔt klin ɛn kɔrɛkt wan. Mɔs plastic, inklud fom, PVC, ɛn akrilik shit, de ansa fayn to spindle pawa we de frɔm 0.8kW to 2.2kW. Dis rεnj de gi yu inof tכk fכ smol smol kכt we yu nכ de risk fכ mεlt כ pasmak vaybrεshכn. If yu wok wit tin dɛn we soft, yu kin yuz smɔl spindle pawa. Fɔ plastic we tik ɔ we at, pik motoka we gɛt mɔ pawa fɔ mek i kɔntinyu fɔ wok fayn fayn wan.
Plastik Tayp |
Rikɔmɛnd Spindle Pawa (kW) . |
|---|---|
Fom, Sɔft wud dɛn |
0.8 – 1.5 |
PVC, Akrilik Sheet dɛn |
1.5 – 2.2. Di wan dɛn we de wok |
Had Plastik dɛn |
2.2 |
Plastik nid fɔ gɛt ay spindl spid we yu kɔmpia am wit mɛtal. Yu fɔ avɔyd fɔ mɛlt bay we yu kip di spindl spid ɔp we yu de kɔt. Mɔs pan di pɔblisha dɛn kin se di spindl spid bitwin 16,000 ɛn 24,000 RPM fɔ plastic. Chip lod fɔ plastic kin de arawnd 0.010 inch. Dis valyu de ɛp yu fɔ klia chips fayn fayn wan ɛn i de mek di ɔt nɔ bɔku. If yu yuz di rayt tul tayp, lɛk 2-flut, ay-hɛliks ɛnd mil, i de mek di chip klia ɛn di sɔfays dɔn fayn.
Yuz ay spindl spid fɔ mek i nɔ mɛlt.
Mentain chip lod nia 0.010' fɔ ifektiv chip rimoval.
Selekt 2-flut, ay-hɛliks ɛnd mil fɔ optimal kɔt.
Yu fɔ saiz yu CNC router moto bay di spindle rikwaymɛnt fɔ plastic. Pik wan motoka we de sɔpɔt di spindl spid ɛn di spindl pawa we dɛn kin kɔmand. Mek shɔ se yu spindle ebul fɔ handle di diuti saykl fɔ yu prɔjek. If yu plan fɔ kɔt plastic fɔ lɔng tɛm, pik motoka we gɛt kol we pɔsin kin abop pan ɛn we gɛt bia we nɔ de chenj. Dis we fɔ du tin de mek shɔ se yu gɛt kɔnsistɛns rizɔlt ɛn i de ridyus di tɛm we yu nɔ de wok.
Match moto saiz to spindle pawa ɛn spindle spid nid.
Chek kompitibiliti wit yu CNC mashin in kɔntrol sistem.
Prioritize motoka dɛn wit efishɔnal kɔl fɔ ɛkstend kɔt sɛshɔn.
Yu want wan cnc spindle motor manifakta we de deliver ɔl tu rilaybiliti ɛn inovashɔn. Zhong Hua Jiang stand out in di indastri wit wan brayt prodak rɛnj ɛn pruv durabiliti. Di kɔmni de gi spindl motoka dɛn we dɛn kin yuz ɛya ɛn wata kol, VFD, ɛn mashin dɛn fɔ kɔt. Yu de bɛnifit frɔm pas 20 ia ɛkspiriɛns fɔ mek tin dɛn ɛn yu gɛt gud nem fɔ ɛkspɔt prɔdak dɛn ɔlsay na di wɔl. Di kɔstɔma dɛn de prez dɛn patented air cooling spindles fɔ pefɔmɛns ɛn lɔng layf.
Tin |
Zhong Hua Jiang, we de na di wɔl |
|---|---|
Prodakt Rɛnj |
Spindle moto dɛn we dɛn kin kɔl wit ɛya ɛn we dɛn kin kɔl wata, VFD, mashin dɛn we dɛn kin kɔt |
Ɛkspiriɛns fɔ mek tin dɛn |
Ɔva 20 ia na di industri |
Di we aw pɔsin kin abop pan am |
Durable, we dɛn kin ɛkspɔt bɔku bɔku wan, we dɛn kin trɔst |
Di Fidbak we di Kastamɔ dɛn kin gi |
Dɛn kin prez am bad bad wan, mɔ di spindle dɛn we de mek di briz kol |
Yu kin ɛkspɛkt advans ficha dɛn frɔm Zhong Hua Jiang. Dɛn spindl motoka dɛn de gi ay prɛsishɔn, kwik instɔleshɔn, ɛn fayn fɔ put am. Di ER11 kolet sistem de sɔpɔt bit frɔm 1-7mm, ɛn di 4-bearing dizayn de mek shɔ se i stebul ɛn efyushɔn kol. Dɛn motoka dɛn ya sabi fɔ kɔt ɛn mil wud, akrilik, ɛn sɔft mɛtal dɛn.
Tin |
Tɔk bɔt |
|---|---|
Prɛsishɔn |
Runout less dan 0.005mm fɔ supia akkuracy |
Instɔlɛshɔn |
Pre-soldered avieshɔn waya fɔ fast sɛtup |
Dizayn |
Izi mounting strɔkchɔ fɔ CNC router ɔpgrɛd |
Fas fas |
Ha-spid ER11 kolet sistem, bits 1-7mm |
Tayp fɔ kol |
Opshɔn dɛn we dɛn kin yuz fɔ kol wit ɛya ɛn we dɛn kin kɔl wata |
Pafɔm |
Mit strɔng standad fɔ difrɛn matirial dɛn |
Yu nid wan cnc spindle motor manifakta we de adap to yu rikwaymɛnt. Zhong Hua Jiang de gi yu fleksibul OEM savis ɛn kɔstɔmayshɔn opshɔn dɛn. Yu kin spɛsifa pawa retinj, kol sistɛm, ɛn spid rɛnj fɔ mach yu prɔjek nid. Di kɔmni in strɔng risach ɛn divɛlɔpmɛnt tim de wok wit yu fɔ mek sɔlvishɔn dɛn we dɛn mek fɔ yu.
Sɛtifiket dɛn impɔtant we yu pik motoka fɔ yu CNC mashin. Zhong Hua Jiang gɛt CE ɛn ISO 9001 sɛtifiket, we de mek shɔ se kwaliti ɛn sef. Yu kin abop pan dɛn prɔdak dɛn fɔ mit di intanashɔnal standad dɛn. Ɔda big big manifakta dɛn, lɛk Parker Hannifin ɛn Kollmorgen, dɛnsɛf de gi kɔstɔmayshɔn ɛn OEM sɔpɔt, bɔt Zhong Hua Jiang in kɔmbayn ɛkspiriɛns ɛn glob ɔl rich de gi yu kɔmpitishɔn advantej.
Yu nid klia gayd we yu de pik spindle moto saiz fɔ difrɛn matirial dɛn. Dis kwik rɛfrɛns tebul de ɛp yu fɔ mach yu CNC spindl motoka to yu prɔjek rikwaymɛnt dɛn. Rivyu di tebul we de dɔŋ fɔ fɛn di pawa, RPM, ɛn di kayn we aw dɛn kin kol fɔ wud, aluminiɔm, akrilik, ɛn plastic.
Tin dɛn |
Spindle Pawa (kW) . |
RPM Rɛnj we dɛn kɔl |
Tayp fɔ kol |
Tipik Aplikeshɔn we dɛn kin yuz |
|---|---|---|---|---|
Wud |
1.5 – 4.5. Di wan dɛn we de wok |
18,000–24,000 pipul dɛn |
Dɛn kin kol am wit ɛya |
Furniture, kavin, panɛl dɛn |
Aluminium we dɛn mek |
1.5 – 5.5. Di wan dɛn we de wok |
10,000–20,000 pipul dɛn |
Dɛn kin kol am wit wata |
Layt mil, fɔ engrav |
Akrilik we dɛn kɔl |
1.5 – 3.0 |
16,000–18,000 pipul dɛn |
Dɛn kin kol am wit ɛya |
Sayn-mɛkin, ditel wok |
Plastik dɛn we dɛn kin yuz |
0.8 – 2.2. Di wan dɛn we de wok |
16,000–24,000 pipul dɛn |
Dɛn kin kol am wit ɛya |
Mɔdel dɛn, we dɛn de kɔt sheet |
Yu kin yuz dis tebul as say fɔ bigin. Adjɔst di spindl pawa ɛn spid bay di tik ɛn hadnɛs fɔ yu matirial. Fɔ big prɔjek ɔ industrial aplikeshɔn, pik ay spindl pawa fɔ kɔnsistɛns pefɔmɛns.
Pik spindl dɛn we gɛt ɛya kol fɔ wud, akrilik, ɛn plastic. Dɛn motoka dɛn ya kin mek i izi fɔ mek dɛn mentenɛns ɛn dɛn kin mek dɛn ebul fɔ mek dɛn kol.
Selekt spindles we dɛn kin kol wit wata fɔ aluminiɔm. Wata kol de manej ɔt we dɛn de kɔt fɔ lɔng tɛm ɛn we dɛn de mil am wit ebi ebi wok.
Yu kin gɛt efyushɔn ɛn prɛsishɔn we yu fala dɛn gaydlayn ya. Zhong Hua Jiang de gi spindle moto dɛn we fit ɛni kategori, we de sɔpɔt ɔl tu di wan dɛn we lɛk fɔ du sɔntin ɛn di wan dɛn we sabi du in wok. If yu nid kɔstɔm sɔlvishɔn, yu kin aks fɔ tayla spindle saiz fɔ mach yu yunik CNC rikwaymɛnt dɛn.
Yu nid fɔ evalyu sɔm tin dɛn bifo yu pik wan spindle fɔ yu cnc mashin. Di rayt chukchuk de mek yu ebul fɔ du mɔ ɛn mek shɔ se yu ajɔst di maksimal matirial rimobul rit fɔ ɛni prɔjek. Tink bɔt dɛn pɔynt ya:
Pawa raytin: Pik ay pawa fɔ denser matirial dɛn lɛk aluminiɔm. Di pawa we smɔl kin wok fayn fɔ wud ɛn plastic.
Spid rɛnj: Match spindle spid to di matirial. Wud nid fɔ gɛt ay spid, we aluminiɔm nid fɔ gɛt mɔdaret spid fɔ mek i gɛt di bɛst rizɔlt.
Tayp fɔ kol: Pik motoka dɛn we gɛt ɛya kol fɔ wud ɛn plastic. Mɔta dɛn we dɛn kin kol wit wata kin gi bɛtɛ tɛmal stebiliti fɔ aluminiɔm ɛn fɔ rɔn fɔ lɔng tɛm.
Torque: High torque de mek yu kɔntinyu fɔ kɔt fɔs, mɔ wit mɛtal.
Bearing kwaliti: Premium bearing inkrisayz prɛsishɔn ɛn rilaybiliti.
Yu kin yuz dis tebul fɔ mach spindle spid to kɔmɔn matirial dɛn:
Tin dɛn |
RPM Rɛnj we dɛn kin rɛkɔmɛnd |
|---|---|
Wud |
18,000 – 24,000 pipul dɛn |
Plastik we dɛn mek |
12,000 – 24,000 pipul dɛn |
Aluminium we dɛn mek |
8,000 – 18,000 pipul dɛn |
Yu fɔ tink bak bɔt yu prɔjek saiz ɛn yu badjɛt. Smɔl prɔjek ɔ ɔbi wok kin nid smɔl pawa, we industrial aplikeshɔn dɛn kin aks fɔ ay pefɔmɛns ɛn fɔ de te.
Zhong Hua Jiang de gi kɔstɔm sɔlvishɔn fɔ spɛshal aplikeshɔn dɛn. Dɛn injinɛri tim dɛn kin wok wit yu fɔ asɛs wetin yu nid ɛn fɔ gi tayla spindle motoka dɛn. Yu de bɛnifit frɔm dɛn kɔmitmɛnt fɔ kwaliti ɛn opareshɔnal efyushɔn.
Bɔku pipul dɛn we de yuz am kin mek mistek we dɛn de pik spindl motoka. Dɛn mistek ya kin mek dɛn nɔ wok fayn ɛn dɛn kin mek dɛn spɛn bɔku mɔni fɔ mek dɛn mentenɛns. Rivyu dis tebul fɔ ɔndastand di prɔblɛm dɛn we kin apin ɛn di bad tin dɛn we kin apin to dɛn:
Kɔmɔn Mistek |
Di tin we go apin to am |
|---|---|
Invɛrta sɛtin dɛn we nɔ kɔrɛkt |
Sped we nɔ de ɔltɛm, kɔt we nɔ de chenj, we di spindle de ɔt pasmak |
Tork mismatch dɛn |
Stɔl dɛn we dɛn de kɔt ebi ebi, vaybreshɔn, aksɛleret wear |
Poor bearing selekshɔn we nɔ fayn |
Ridyus bia layf, moto instabiliti |
Suboptimal kɔnfigyushɔn dɛn |
Ɛnaji we nɔ de wok fayn, fɔlt kɔd, trip |
Yu fɔ avɔyd di mismatched moto paramita ɛn improper kul sɛtup. Ɔltɛm verify invɛrta sɛtin ɛn pik di rayt tɔk ɛn bia kwaliti fɔ yu matirial dɛn. Di rayt sayz ɛn kɔnfigyushɔn de ɛp yu fɔ mek yu kɔntinyu fɔ wok fayn ɛn mek yu spindl liv lɔng.
Yu kin optimize CNC rizulyt bay we yu mach spindle pawa to yu matirial. Rivyu dis sɔmari:
Pawa Rɛnj |
Best For |
|---|---|
0,8–1.5kW na di s |
Wud, akrilik, plastic, yus fɔ ɔbi |
2,2–4,5kW we de mek yu gɛt di sik |
Aluminium, sɔft mɛtal, advans wud wok |
5.5kW ɛn ɔp |
Hevi-duti, industrial aplikeshɔn dɛn |
If yu pik di rayt spindle motor, i nɔ de mek yu ɔt pasmak ɛn yu nɔ go kɔt fayn. Zhong Hua Jiang in injinɛri sɔpɔt ɛn kwaliti ɛshyurishɔn de ɛp yu fɔ pik di bɛst fit fɔ yu nid dɛn.
Yu fɔ pik wan spindl motoka bitwin 1.5 kW ɛn 3.0 kW fɔ ɔbi wud wok. Dis rεnj de gi yu inof pawa fכ mכst prכjek dεm εn mek sכh se yu kכt smol, prεsis.
Yu kin yuz 2.2 kW to 3.0 kW spindl fɔ ɔl tu di wud ɛn layt aluminiɔm wok. Fɔ kɔt aluminiɔm ɔltɛm, pik wan spindl we dɛn kin kol wit wata fɔ mek yu ebul fɔ yuz di ɔt fayn fayn wan.
Chek yu spindle spid bifo yu kot. Fɔ bɔku pan di akrilik prɔjek dɛn, sɛt di spindle bitwin 16,000 ɛn 18,000 RPM. Test pan skrap matirial fɔ avɔyd fɔ mɛlt ɔ chip.
Fɔ plastic, di spindle dɛn we dɛn kɔl aircooled kin wok fayn. Dɛn kin mek i nɔ wam pasmak ɛn dɛn kin mek i izi fɔ mek dɛn mentenɛns. Yuz ay spindl spid fɔ kip di kɔt klin ɛn avɔyd fɔ mɛlt.
Yes, Zhong Hua Jiang de gi kɔstɔm spindle motoka dɛn. Yu kin spɛsifa pawa, spid, ɛn kol opshɔn fɔ mach yu CNC prɔjek rikwaymɛnt dɛn.
