|
ER16 1.5KW Square Mframa a Ɛyɛ Nwini
110V/220V na ɛwɔ hɔ
10000-24000 RPM na ɛyɛ adwuma
4.3kg na ɛwɔ hɔ
Mframa a ɛma ɛyɛ nwini
ER16 na ɛwɔ hɔ
1.5KW na ɛwɔ hɔ
8A
247X90X105mm na ɛwɔ hɔ
Twe Zhong Hua Jiang 2025 CNC Router Mfiri Katalog (PDF) no .
Zhong Hua Jiang Square ER16 1.5kW Air-Cooled CNC Spindle Motor Kit no ka square-frame spindle motor, 1.5kW variable frequency drive (VFD), ER16 collets ne installation nneɛma a wɔde yɛ CNC routing, engraving ne light-duty milling bom. Wɔayɛ ama mfiri adansifoɔ, CNC adwumayɛbea ahodoɔ, wɔn a wɔkyekyɛ ne adwumayɛfoɔ a wɔtɔ a wɔreyɛ nhyehyɛeɛ sɛ wɔbɛma spindle ayɛ yie koraa.
ER16 collet nhyehyɛe no gye adwinnade-shank a wɔakyerɛw din kɛse sen ER11 nkyerɛase a ɛwɔ saa beae yi. Wɔde VFD a wɔde ama no di dwuma de si spindle ahoɔhare so na wɔhwɛ so, bere a motor a mframa ma ɛyɛ nwini no nhia nsu pɔmpɛ anaa coolant tank a ɛyɛ soronko na ama spindle no ayɛ nwini.
Wɔaka voltage nhyehyeɛ a ɛwɔ hɔ ho asɛm sɛ 110V ne 220V, a ahoɔhare a wɔatintim no yɛ 10,000–24,000 RPM. Ɛsɛ sɛ adetɔfo si VFD input rating a ɛyɛ pɛpɛɛpɛ, spindle nameplate ne power supply a wɔapaw no so dua ansa na wɔakra anaasɛ wɔde wire ahyɛ kit no mu.
Bisa ER16 Square Spindle Kit Bo a Wɔbɔ
| Specification | Aguade ho nsɛm a wɔatintim |
|---|---|
| Spindle motor ahoɔden | 1.5kW (1500W) na ɛwɔ hɔ. |
| Motor nhyehyɛe | Square, mframa-nwini CNC spindle motor |
| Collet ntam nkitahodi | ER16 na ɛwɔ hɔ |
| Ahoɔhare a ɛkɔ baabiara | 10,000–24,000 RPM na ɛyɛ adwuma |
| Voltage a wobetumi apaw | 110V / 220V nkyerɛase ahorow; si spindle ne VFD ratings a wɔapaw no so dua |
| Rated mprempren | 8A (aguade ho nsɛm a wɔahyehyɛ) . |
| Spindle frequency a ɛyɛ den | 400Hz (high-frequency spindle adwumayɛ; hyehyɛ VFD no sɛnea ɛfata) |
| Spindle mu duru | 4.3kg (wɔatintim motor mu duru; ɛnyɛ kit po so hyɛn mu duru nyinaa) |
| Spindle kɛse | 242 × 90 × 105mm wɔ kit component pon no so; bisa mprempren instɔlehyɛn mfonini no |
| Mfiri a wɔahyɛ da ayɛ | CNC router ne engraving mfiri; ɛsɛ sɛ wɔhwɛ sɛ instɔlehyɛn ne controller nkitahodi no yɛ nokware |
Sɛ wopɛ sɛ wode mfiri hyehyɛ a, bisa mprempren dimension mfonini no: afiri a wɔatintim no ho nkyerɛkyerɛmu no kyerɛw ne nyinaa tenten a ɛsono kakra wɔ kit pon no ho. Ɛsɛ sɛ VFD nhyehyɛe ne anyinam ahoɔden nkitahodi nyinaa ne motor a wɔapaw ne mpɔtam hɔ nneɛma a wɔde ma no hyia.
Standard kit nhyehyeɛ a ɛwɔ aseɛ ha no ma adetɔfoɔ tumi si so dua sɛ wɔde bɛma ansa na wɔakra.
| Dodow | Component / kit ho nsɛm a ɛkɔ akyiri |
|---|---|
| 1× na ɛyɛ | 1.5kW ahinanan mframa-nwini spindle motor |
| 1× na ɛyɛ | 1.5kW VFD inverter a ɛyɛ adwuma |
| 13× na ɛyɛ | ER16 collets (wɔakyerɛw ne kɛse: 1–10mm) . |
| 10× na ɛyɛ | Drill bits (wɔakyerɛw: 0.8–3mm, 1/8-inch shank) . |
| 1× na ɛyɛ | Wimhyɛn mu nhama |
| 1× na ɛyɛ | Tumi a wɔde yɛ waya |
| 4× na ɛyɛ | Wrench ahorow a wɔde yɛ nsafe |
| Spindle motor kɛse: 242 × 90 × 105mm (9.5 × 3.5 × 4.1in), sɛnea wɔakyerɛw ama saa kit nhyehyɛe yi. | |
| Spindle motor mu duru: 4.3kg. | |
ER16 collet range a wɔakyerɛw no nkyerɛ collet ankorankoro 13 no nyinaa. Si collet akɛseɛ pɔtee, VFD model, plug/wiring standard ne accessory list wɔ adetɔ krataa no mu so dua.
Si Kit Contents no so dua na Bisa Quote
Saa square 1.5kW ER16 spindle kit yi yɛ nea wɔahyɛ da ayɛ ama CNC router engraving, profile routing, signmaking ne compatible light-duty milling adwumayɛ. Nneɛma a ɛfata gyina adwuma no, nea ɔde twa, afiri no stiffness, adwinnade kwan ne onwini tebea so.
Fa spindle no di dwuma ma nkyerɛwde, relief carving ne profile routing wɔ nnua a ɛfata ne nnua a egyina boards so. Paw adwinnade kɛse ne aduan dodow a wɔde ma ade no na hwɛ sɛ spindle no da so ara wɔ ne dwumadibea a wɔakyerɛ no mu.
CNC nhyehyɛe a ɛfata betumi de ER16 square spindle no adi dwuma de ayɛ engraving, nkyerɛwde, slots ne profiles wɔ acrylic ne plastic afoforo a wotumi de mfiri yɛ mu. Chip evacuation, cutter geometry ne ɔhyew management ho hia ma ano a wɔawie no.
Hann-adwuma mfiri a aluminium anaa kɔbere betumi ayɛ yiye wɔ CNC afiri a ɛyɛ den sɛnea ɛsɛ a nnwinnade a ɛfata, adwumayɛ ne conservative cutting parameters. Spindle kit no nyɛ nea wɔde besi ananmu de ahwɛ sɛ mfiri no yɛ den anaasɛ mfiri tumi yɛ adwuma.
Ka CNC Nneɛma ne Spindle Compatibility ho asɛm
Wɔayɛ ER16 spindle hwene no ama ER16 collets a ɛne no hyia. Kit no kyerɛw collets 13 a ɛkata din a ɛyɛ 1–10mm kwan so ne drill bits 10 a ɛwɔ 1/8-inch shanks. Hwɛ collet bore biara a ɛka ho no wɔ cutter shanks a wɔahyɛ da ayɛ no ho ansa na woayɛ mfiri.
1.5kW VFD a wɔde ama no yɛ nea wɔayɛ sɛ ɛbɛma spindle ahoɔhare a wotumi sesa wɔ motor no a wɔaka sɛ ɛyɛ 10,000–24,000 RPM kwan no mu. Fa inverter output voltage, motor current, adwumayɛ frequency ne acceleration nhyehyɛe no hyia spindle din krataa ne inverter nhoma no.
Nipadua a ɛyɛ ahinanan no ma kwan ma wɔde si CNC nhyehyɛe a ɛne no hyia so a nsu-nwini pɔmpɛ, hoses ne tank a ɛhwehwɛ sɛ nsu-nwini spindle. Ɛsɛ sɛ mframa a ɛkɔ mu ne nea ɛkɔ mu no mu da hɔ na ɛsɛ sɛ nhyehyɛe a wɔde si so no ne motor no mfonini no hyia.
Baabi a CNC controller ne VFD a wɔapaw no de control terminals a ɛne no hyia ma no, wobetumi asiesie ahoɔhare ahyɛde ne start/stop control denam VFD interface a ɛfata so. Hwɛ GRBL controller outputs, grounding, signal isolation ne VFD parameters ansa na wode ahyɛ mu; compatibility nyɛ automatic mma controller biara.
Aguade no ka spindle a ɛwɔ bearing anan ne rotor a ɛkari pɛ wɔ ahoɔden a wɔayɛ sɛ ɛbɛboa ahoɔhare kɛse adwumayɛ a ɛyɛ den ho asɛm. Runout mfonini ahorow a wɔatintim kyerɛ nhwɛsode a efii mu bae a ɛba fam sen 0.005mm; runout ankasa gyina susuw gyinabea, collet, adwinnade, nhyiam ne sɔhwɛ kwan so. Bisa nhwehwɛmu data a ɛfata ma dwumadie a ɛho hia wɔ adwumayɛ mu.
Wimhyɛn waya, tumi waya ne nsafe anan a ɛka ho no boa mfiri a wɔde si hɔ ne adwinnade mu nsakrae a wɔyɛ no daa. Ɛsɛ sɛ adwumayɛfoɔ a wɔfata a wɔwɔ asase, ahobanbɔ ne motor parameter nhwehwɛmu a ɛfata na wɔyɛ anyinam ahoɔden a wɔde besisi hɔ ne VFD dwumadie.
Wɔde dynamic balancing di dwuma de boa ma spindle wosow so tew bere a wɔde ahoɔhare kɛse reyɛ engraving ne routing no. Dede ankasa, soro wie ne adwumayɛ a ɛyɛ den nso gyina bearings, workpiece mounting, cutter geometry ne CNC mfiri frame.
Wɔka ER16 square spindle no ho asɛm sɛ wɔde dade bearing anan a wɔayɛ no foforo ne kɔbere winding nhyehyɛe na edi dwuma. Bearing tebea ne ɔsom nkwa gyina adesoa, adwuma kyinhyia, adwumayɛ hyew, mfutuma a ɛda adi ne nsiesie so; wɔmfa service-life multiple a wɔahyɛ da ahyɛ ho bɔ mma instɔlehyɛn biara.
Mfonini ne akontaabu ahorow a wɔde toto ho no kyerɛ nhwɛsode susuw a nea ɔyɛe no aka; saa gyinapɛn ahorow yi nsi runout nhwehwɛmu amanneɛbɔ a ɛfa spindle pɔtee a wɔde ama no ananmu.
| Zhong Hua Jiang Spindle Motor | Nkyerɛkyerɛmu Spindle Motor |
|---|---|
 |
 |
| Wɔatintim nhwɛso runout: ennu 0.005mm. | Nhwɛso a wɔde kyerɛw nsɛm a wɔatintim: bɛyɛ 0.05mm. |
Spindle dan no de gyinabea ahorow a wɔde si ahinanan nipadua no so di dwuma. Wɔka VFD no ho asɛm sɛ wɔadi kan ayɛ ho nhyehyɛe. Hwɛ ne ankasa delivered parameter nhyehyɛe, motor rotation akwankyerɛ ne stop suban ansa na woafi ase ayɛ.
Bisa Spindle Drawings ne VFD Specifications
Standard kit nhyehyeɛ a yɛaka ho asɛm wɔ atifi hɔ no bi ne motor, 1.5kW VFD, collets, drill bits, wiring ne wrenches. Ɛsɛ sɛ wosi nneɛma a wɔde kyekyere nneɛma ho ban ne nhyehyɛe a wɔayɛ sɛ wɔde bɛmena amanaman ntam no so dua ma nneɛma dodow a wɔabisa ne baabi a wɔrekɔ no.
Distributors ne OEM adetɔfo betumi abisa quotation nsɛm a ɛfa voltage paw, packing units, branding ne accessories. Fa wo destination gua, CNC controller type ne hwɛ kwan sɛ order dodow ma na aboa ma woahu nhyehyɛe a ɛfata.
Bisa Bulk Pricing ne Packing ho nsɛm
Fa toto spindle tumi, ER collet kɛse, square anaa kurukuruwa dan, controller ahwehwɛde ne nneɛma a ɛka ho ansa na woapaw CNC spindle kit. Nneɛma a wɔpaw wɔ ase ha no yɛ nneɛma nhyehyɛe ahorow a ɛsono emu biara.
500W spindle kit no yɛ nhyehyɛe a ɛyɛ soronko a ɛwɔ ahoɔden a ɛba fam. Si ne motor ne controller type no so dua sen sɛ wobɛfa no sɛ ɛde 1.5kW AC VFD nhyehyɛe koro no ara na edi dwuma.
Huajiang ka sɛ ne CNC spindle motor a wɔyɛ no fii ase wɔ afe 2000 mu na akyiri yi ɛtrɛw kɔɔ variable frequency drives ne CNC engraving mfiri mu. Wɔde Zhong Hua Jiang ahyɛnsodeɛ no baeɛ wɔ afe 2018 mu.
Adwumakuw no ka CNC spindle motors ne mfiri afã horow a ɛfa ho a wɔyɛ ne nea wɔde kɔ amannɔne ho asɛm ma amanaman ntam adetɔfo. Ɛsan nso fa mframa a ɛma ɛyɛ nwini spindle motor patent reference, No. 200730184245.5. Adetɔfo betumi abisa tumi krataa ne nneɛma ho nkrataa a ɛfoa so ama wɔn adetɔ ho kyerɛwtohɔ ahorow.
Wo ne CNC Spindle Manufacturer no nkasa
 |
||
| Nneɛma a Ɛyɛ Paara a Wɔhwɛ So Nhwehwɛmu nhyehyɛe ne nneɛma a wɔyɛ no mu nhwehwɛmu ansa na wɔde amena. |
Patent ho Nwoma a Wɔde Yɛ Adwuma Manufacturer patent ho nsɛm wɔ hɔ a wobetumi abisa. |
Osuahu a Ɔyɛ no CNC spindle motors, VFDs ne CNC mfiri afã horow. |
 |
||
| Factory-Tẽẽ a Wɔde Ma Bo ne quotation ho nsɛm a ɛfa adetɔfo a wɔyɛ adwumaden ho. |
Mfiridwuma ho Mmoa Mmoa ma instɔlehyɛn ne afiri nhyehyɛe ho nsɛmmisa. |
Nneɛma a Wɔde Kɔ Amannɔne Ntam Nkitahodi Nsiesiei a wɔde bɛmena ne order updates a egyina quotation a wɔapene so so. |
Hwehwɛ CNC router formats a ɛyɛ ketewa ne mfiri akɛseɛ, a 3018, 3020, 3040 ne 6090 afiri mmusua ka ho, sɛdeɛ adwumayɛbea ne application ahwehwɛdeɛ teɛ.
Paw spindle mfiridwuma sɛnea tumi ahiade, mfiri mounting, onwini ahwehwɛde, adwuma kyinhyia ne nnwinnade.
Nneɛma a wɔde boa no bi ne control ne mfiri afã horow te sɛ limit switches, Z probes, ntɛmpɛ-gyina mfiri ne shielded cables ma CNC installations a ɛfata.
Stepper motor options som CNC gyinabea ne nea ɛfa ho kankyee dwumadie; paw motor ne draiver a wɔahyɛ no agyirae ma afiri no axis a wɔhwehwɛ no.
Wɔde nkrataa a wɔada no adi wɔ ha no ama sɛnea ɛbɛyɛ a wobetumi ahwɛ. Sɛ ɛho hia sɛ wonya adansedi krataa, mpaemuka anaa krataa pɔtee bi a ɛkyerɛ sɛ wodi gua so a, bisa adanse a ɛfa motor, VFD ne gua a worekɔ no pɛpɛɛpɛ ho.
Wɔakyerɛ sɛ adetɔfo nsɛm a wɔka fa Zhong Hua Jiang CNC spindle nneɛma ho; application ahwehwɛde ne nea efi mu ba betumi ayɛ soronko wɔ spindle nhyehyɛe ne CNC mfiri.
Package list a wɔatintim no kyerɛ 1.5kW square spindle baako, 1.5kW VFD baako, ER16 collets 13, drill bits 10, wimhyɛn waya baako, power wire baako ne wrench anan. Si so dua sɛ ne kɛse pɔtee ne inverter model a wɔde ama no ne quotation no.
Saa nkyerɛaseɛ yi de ER16 collet interface di dwuma na ɛwɔ listed collet range a ɛyɛ 1–10mm. ER11 ne ER16 collets yɛ nhyehyɛe ahorow; hwɛ cutter-shank dimensions ne motor interface no ansa na woapaw kit.
Aane. Kit a wɔakyerɛw no wɔ 1.5kW VFD inverter biako. Si input voltage, model, control terminals ne adwumayɛ nhyehyɛe so dua ma wo mpɔtam hɔ supply ne CNC controller.
Ahoɔhare a wɔde yɛ adwuma a wɔatintim no yɛ 10,000–24,000 RPM. Wɔaka spindle no ho asɛm sɛ 400Hz high-frequency model, na ɛsɛ sɛ wɔhyehyɛ VFD no sɛnea nameplate ne motor nkyerɛkyerɛmu a ɛfata te.
Adeɛ no de 110V ne 220V nhyehyeɛ ma. Ɛsɛ sɛ wobu eyinom sɛ nneɛma a wɔkra, na ɛnyɛ sɛ kwan a wɔde bɛma sɛ wɔde motor biako anaa VFD bɛka nneɛma abien no mu biara ho a nyiyim biara nni ho. Si nhyehyɛe ne wiring akwankyerɛ a wɔahyɛ no so dua.
Nneɛma a wɔde ahyɛ mu pon no ka sɛ 242 × 90 × 105mm ne 4.3kg. Aguadeɛ ho nkyerɛkyerɛmu a ɛyɛ soronko kyerɛw ne nyinaa tenten a ɛsono kakra, enti nya instɔlehyɛn mfonini a ɛtwa toɔ ansa na wode mfiri ayɛ mounting bracket.
Nneɛma a wɔde ahyɛ mu no kyerɛw ER16 collets 13 wɔ 1–10mm kwan a wɔaka ho asɛm no mu. Wɔamfa ankorankoro bore nkɔanim ahorow no amma wɔ pon no so; bisa kɛseyɛ mu mpaapaemu pɛpɛɛpɛ sɛ wo nnwinnade no hia diameter pɔtee bi a.
Kit list no kyerɛ drill bits 10 a wɔaka ho asɛm sɛ 0.8–3mm a ɛwɔ 1/8-inch shanks, ne wrenches anan. Hwɛ bit sizes ne adwinnadeɛ ahodoɔ a ɛyɛ pɛpɛɛpɛ wɔ order confirmation no mu.
Eyinom yɛ application ahorow a wɔakyerɛw ama CNC nhyehyɛe ahorow a ɛne no hyia. Nea efi mu ba no gyina adwinnade a wɔpaw, aduan a wɔde ma ne ahoɔhare, nneɛma su, mfutuma anaa chip control ne mfiri a ɛyɛ den so.
Nea ɔde nneɛma ma no kyerɛ sɛ mfiri a wɔde dade a ɛyɛ mmerɛw yɛ a emu nyɛ duru yɛ nea wobetumi de adi dwuma. Si CNC mfiri no kateeyɛ, nnwinnade a ɛfata, adwumayɛ, twa parameters ne adwumayɛ kyinhyia a wɔhwɛ kwan ma wo dwumadi pɔtee no so dua.
Ebia wɔbɛka abom bere a controller no de VFD control signals a ɛfata ma na inverter a wɔapaw no de control inputs a ɛne no hyia ma. Si spindle mfiase/gyina, ahoɔhare sohwɛ, isolation ne wiring ahwehwɛde ahorow so dua ansa na woatɔ.
Ɛho nhia sɛ abɔnten so pɔmpɛ anaa nsuonwini akorae biara mma spindle onwini. Ma motor mframa akwan no mu nna hɔ na di akwankyerɛ a ɛfa sɛnea wɔde besisi ne ne siesie ho akyi.
Wɔka VFD no ho asɛm sɛ wɔadi kan ayɛ ho nhyehyɛe. Si inverter parameters a wɔde ama no so dua na hwɛ sɛ rotation akwankyerɛ, motor voltage, mprempren, frequency ne ahobammɔ nhyehyɛe bere a commissioning.
Ntotoeɛ a ɛyɛ nhwɛsoɔ bɔ amanneɛ sɛ nhwɛsoɔ boɔ a ɛwɔ aseɛ 0.005mm. Sɛ wopɛ sɛ wotɔ ade pɔtee bi a, bisa runout specification ne ne susuw kwan, beae ne nhwehwɛmu tebea.
Zhong Hua Jiang ma wɔn a wɔkyekyɛ nneɛma, wɔn a wɔyɛ mfiri ne wɔn a wɔtɔn nneɛma akɛse no akwaaba. Kyɛ wo voltage nhyehyeɛ a wɔhwehwɛ, dodoɔ, baabi a worekɔ, packaging ne technical ahiadeɛ na woabisa formal quotation.
Ɔyɛfoɔ no ka OEM/ODM akwan a ɛfa branding, packaging, voltage ne ahwehwɛdeɛ foforɔ ho asɛm. Ɛsɛ sɛ wɔpene engineering feasibility, component options ne aguadi ho nsɛm so ma adwuma biara.
Nea ɔde nneɛma ma no ka sɛ wobetumi asusuw sɔhwɛ nketewa a wɔkra ho ama standard kits. Wɔka dodow a wɔde ma sɛnea wɔpɛ anaasɛ wɔkra nneɛma pii ho asɛm sɛnea nhyehyɛe ne nsɛm a wɔafa aka a wɔabisa no te.
Akwankyerɛ a wɔatintim no ka bɛyɛ adwuma nnafua 3–7 ma nhyehyɛe a wɔahyɛ da ayɛ wɔ sikatua akyi ne nnafua 10–20 ma ahyɛde akɛse anaa nea wɔayɛ no sɛnea wɔpɛ. Eyinom yɛ mmere a ɛkyerɛ nneɛma a wɔyɛ, ɛnyɛ nna a wɔahyɛ ho bɔ sɛ wɔbɛba; si mprempren nhyehyɛe ne ɔkwan a wɔfa so de nneɛma mena no so dua.
Wɔaka asram 12 warranty ne mfiridwuma mmoa a ɛkɔ so ho asɛm ama spindle, VFD ne nneɛma a ɛfa ho. Si so dua sɛ wɔbɛkata so, nea wɔayi afi mu, ɔsom nhyehyɛe ne nsɛm a wɔde besi ananmu wɔ adetɔn apam a etwa to no mu.
Kyerɛ 110V anaa 220V a wɔde ma, CNC controller model, ahwehwɛde ER16 collet akɛse, mfiri mounting mfonini, botae nneɛma, dodow, po so hyɛn ɔman ne biara OEM packaging ahwehwɛde. Saa nsɛm yi boa ma wohu kit nhyehyɛe a ɛfata.
