VFD 110V 2.2KW 2hp Variable Frikyuɛnsi Drayv CNC VFD Moto Drayv Invɛrta Kɔnvɔta fɔ CNC Spindle Mɔtɔ

Zhong Hua Jiang 110V 2.2KW CNC VFD Inverter fɔ Spindle Motor

Dis Zhong Hua Jiang 110V 2.2KW CNC VFD invɛrta na fɔ tri faz 110V asynchronous CNC spindl motoka dɛn. I de kɔnvɔyt singl faz 110V input to tri faz 110V ɔtput, we de mek i fayn fɔ CNC routers, engraving mashin, wud wok CNC mashin, ɛn spindle spid kɔntrol sistem.

Di VFD sɔpɔt 0-400Hz ɔtput frikshɔn, MODBUS485 kɔmyunikeshɔn, Mach3 kɔntrol, bilt-in brek yunit kɔnɛkshɔn, DSP vektɔ kɔntrol, 16-sɛkshɔn spid kɔntrol, bɔku fɔlt protɛkshɔn, ɛn ay tɔk autput na lɔw spid. I pri-program wit besik paramita fɔ ɛp yuza dɛn fɔ kɔmplit sɛtup izi wan.

Di men tin dɛn we yu fɔ du

• 110V 2.2KW CNC VFD invɛrta fɔ kɔmpitabl tri faz spindl motoka dɛn.

• Single faz 110V input ɛn tri faz 110V autput.

• Output frikshɔn rɛnj frɔm 0-400Hz fɔ CNC spindl spid kɔntrol.

• Pre-programmed besik paramita fɔ izi instɔleshɔn.

• MODBUS485 kɔmyunikeshɔn ɛn Mach3 kɔntrol sɔpɔt.

• Bilt-in brek yunit fɔ dairekt brek rɛsistɔ kɔnɛkshɔn.

• DSP vektor kontr ɔ l fɔ ay tɔk na lɔw spid rɔteshɔn.

• 16-sekshɔn spid kɔntrol fɔ fleksibul CNC mashin ɔpreshɔn.

• Multiple fault protection fɔ sef spindle sistem ɔpreshɔn.

• Big ay volyum kul fan wit indipɛndɛnt ɔt disipeshɔn chanɛl.

Teknik Paramita dɛn

• Produk: CNC VFD invɛrta / Variable Frikyuɛnsi Drayv

• Pawa: 2.2KW

• Rated spesifikasi: 2HP, 110V, 2.2KW

• Input voltaj: Singl faz 110V

• Output voltage: Tri faz 110V

• Input frikshɔn: 50/60Hz

• Otput frikshɔn: 0-400Hz

• Aplikabl moto: Tri faz 110V asynchronous CNC spindl moto nכmכ

• Dimenshɔn: 90 × 118 × 150mm / 3.5 × 4,65 × 5.9 inch

• Weyt: 1.3kg / 2.87lbs

Diskripshɔn fɔ di Prodak

Pre-Programmed CNC VFD fɔ Izi Sɛtup

Dis CNC VFD dɔn bi prɛ-program wit besik paramita dɛn, so di wan dɛn we de yuz am nɔ nid fɔ kɔmplit kɔmplikɛt fɔs sɛtin dɛn bifo dɛn ɔpreshɔn. Di difɔlt maksimal frikshɔn na 400Hz, ɛn di wan dɛn we de yuz am kin ajɔst di frikshɔn akɔdin to di spindl RPM we dɛn nid.

Dɛn mek am wit singl faz input ɛn tri faz autput, we mek i fayn fɔ wokshɔp ɛn CNC router yuza dɛn we nid fɔ rɔn tri faz 110V spindl motoka frɔm 110V pawa saplai.

Brek Resistor Kɔnɛkshɔn ɛn MODBUS485 Kɔmyunikeshɔn

Dis VFD de sɔpɔt Mach3 ɛn MODBUS485 kɔmyunikeshɔn fɛnshɔn. Di bilt-in brek yunit alaw di invɛrta fɔ kɔnɛkt dairekt to wan brek rɛsistɔ, ɛp fɔ impɔtant disilireshɔn kɔntrol ɛn spindl ɔpreshɔn stebiliti insay CNC mashin aplikeshɔn dɛn.

Big Air Volume Kulin Fan

Di kul fan de gi mɔ pas 20% ay volyum fɔ ay pas ɔdinari fan dɛn. Di indipɛndɛnt ɔt disipeshɔn ay chanɛl we de insay di VFD de mek wan sɛpret kol ples ɛn i de ɛp fɔ mek dɔst ɛn wata mist nɔ go insay di sɔrkwit bɔd.

Bɔku Fɔlt Protɛkshɔn

Di invɛrta inklud bilt-in PID sɛtin, spid trakin, mɔlti-fɔnshɔn rilay ɔtput, bɔku fɔlt protɛkshɔn, bɔku stetɔs fidbak, tɔk kɔntrol, ɛn analɔg sɛtin. Dɛn wok ya de ɛp fɔ protɛkt di VFD ɛn di spindl motoka we dɛn de yuz CNC routing, engraving, ɛn mashining opareshɔn.

High Torque na Low Spid Roteshɔn

DSP vektor kontrכl de mek di spindl mכta ebul fכ achy hεy tכk di tεm we i de rכt lכw spid. Dɛd zon kɔmpɛnshɔn ɛn ɔtomɛtik tɔk difrɛns kɔmpɛnshɔn kin ajɔst lɔw frikshɔn 0.25Hz ɛn 180% ay tɔk autput fɔ dimand CNC spindl aplikeshɔn dɛn.

Adjustable 16kHz Karia Frikshɔn

Di karia frikshɔn na adjɔstabl te to 16kHz. Otomatik vɔlɔt rigyuleshɔn teknɔlɔji de ɛp fɔ mek shɔ se VFD lod kapasiti ɛn stebul spindle moto pefɔmɛns di tɛm we dɛn de yuz CNC mashin.

Wiring Diagram fɔ VFD

Wayring Diagram Bitwin VFD ɛn Kɔntrol Bɔd

Dis VFD na aplikebul onli to tri faz 110V asynchronous CNC spindl moto.

Konekt di spindle moto to di U / V / W tɛminal dɛn na di VFD.

Wetin Mek Dis 2.2KW CNC VFD Yunik?

• Disain fɔ 110V 2.2KW CNC spindl moto spid kɔntrol.

• Pre-programmed besik paramita dɛn de ɛp fɔ ridyus di sɛtup tɛm.

• Brek resistɔ kɔnɛkshɔn de sɔpɔt mɔ stebul disilireshɔn kɔntrol.

• DSP vektor kontrכl de delivεr hεy tכrk pan lכw spid roteshכn.

• Bɔku fɔlt protɛkshɔn de ɛp fɔ mek sef we CNC de wok.

• Indipɛndɛnt kol chanɛl de ɛp fɔ ridyus dɔst ɛn mɔstɔ impak.

• I fayn fɔ CNC router, CNC engraving, wud wok, ɛn spindle moto sistem.

Zhong Hua Jiang Brand ɛn Manufacturing Bakgrɔn

Huajiang bin stat insay 2000, stat wit di prodakshɔn fɔ CNC engraving spindle moto ɛn leta i expand prodakshɔn to VFD variebul frikshɔn drayv ɛn engraving mashin. Fɔ fɛn ɛn divɛlɔp mɔ glob ɔl makɛt, dɛn bin mek di Zhong Hua Jiang brand insay 2018.

Zhong Hua Jiang gɛt lɔng tɛm manufakchurin ɛkspiriɛns pan CNC spindle motoka ɛn VFD prodak, ɛn i de saplae prodak fɔ CNC router yuza, mashin bilda, distribyushɔn, ɛn B2B bayer na intanashɔnal makit.

Waranti ɛn Sɔpɔt

Wit lɔng tɛm manufakchurin ɛkspiriɛns insay CNC spindle moto ɛn VFD prodak, Zhong Hua Jiang de gi sɔpɔt fɔ prodak sɛlɛkshɔn, waya, sɛtup, ɛn aplikeshɔn kwɛstyɔn dɛn. Fɔ bɔku ɔda, distribyushɔn bay, ɔ CNC spindle sistem maching, duya kɔntakt wi fɔ di ditel dɛn.

FAQ we dɛn kin aks

Wetin spindle moto dis 2.2KW VFD kompitibul wit?

Dis VFD na suitable onli fo tri faz 110V asynchronous CNC spindl moto. Bifo yu instɔl am, duya kɔnfɔm se di spindle moto vɔlɔt, faz, ɛn pawa de mach di invɛrta spɛsifikɛshɔn dɛn.

Dis VFD kin kɔnvɔyt singl faz 110V to tri faz 110V?

Yɛs. Dis VFD de yuz singl faz 110V input ɛn de gi tri faz 110V autput fɔ kɔmpitabl CNC spindl motoka dɛn.

Dis CNC VFD na pri-program?

Yɛs. Di VFD na prɛ-program wit bɛsik paramita dɛn. Di wan dɛn we de yuz am kin ajɔst di frikshɔn akɔdin to di spindl spid we dɛn nid, ɛn di difɔlt maksimal frikshɔn na 400Hz.

Dis VFD de sopot Mach3 en MODBUS485?

Yɛs. Dis invɛrta de sɔpɔt Mach3 kɔntrol ɛn MODBUS485 kɔmyunikeshɔn, we de mek i fayn fɔ CNC router kɔntrol bɔd intagreshɔn.

Dis VFD kin kɔnɛkt to brek rɛsistɔ?

Yɛs. Di VFD gɛt wan brek yunit we dɛn bil insay ɛn dɛn kin kɔnɛkt am dairekt to wan kɔmpitabl brek rɛsistɔ fɔ mek i ebul fɔ kɔntrol di disilɛshɔn fayn fayn wan.

Us CNC aplikeshɔn dɛn kin yuz dis 2.2KW VFD?

Dɛn kin yuz am fɔ CNC routers, CNC engraving mashin, wud wok CNC mashin, ɛn ɔda spindle motor sistem dɛn we nid variebul frikshɔn spid kɔntrol.