VFD 110V 1.5KW 2hp Variable Frikyuɛnsi Drayv CNC VFD Moto Drayv Invɛrta Kɔnvɔta fɔ CNC Spindle Mɔtɔ

Zhong Hua Jiang 110V 1.5KW 2HP CNC VFD Invεrter fכ Spindle Motor

Dis Zhong Hua Jiang 110V 1.5KW CNC VFD invɛrta na fɔ tri-faz 110V asynchronous CNC spindl motoka dɛn. I de kɔnvɔyt singl-faz 110V input to tri-faz 110V ɔtput, we de mek i fayn fɔ CNC routers, engraving mashin, wud wok mashin, ɛn ɔda spindle spid kɔntrol aplikeshɔn dɛn.

Di VFD sɔpɔt 0–400Hz ɔtput frikshɔn, MODBUS485 kɔmyunikeshɔn, Mach3 kɔntrol, bilt-in brek yunit kɔnɛkshɔn, DSP vektɔ kɔntrol, malti-spid ɔpreshɔn, ɛn bɔku fɔlt protɛkshɔn. I pri-program wit besik spindle paramita fɔ ɛp yuza dɛn fɔ kɔmplit instɔleshɔn ɛn kɔmishɔn mɔ efyushɔn.

Di men tin dɛn we yu fɔ du

• 1.5KW / 2HP CNC VFD invɛrta fɔ tri-faz 110V spindl motoka dɛn.

• Single-faz 110V input ɛn tri-faz 110V ɔtput.

• 0–400Hz autput frikshɔn fɔ CNC spindl spid kɔntrol.

• Pre-programmed besik paramita fɔ izi sɛtup.

• MODBUS485 kɔmyunikeshɔn ɛn Mach3 kɔntrol sɔpɔt.

• Bilt-in brek yunit fɔ dairekt brek rɛsistɔ kɔnɛkshɔn.

• DSP vektor kontr ɔ l fɔ ay tɔk na lɔw spid.

• Multiple fault protekshɔn fɔ sef CNC ɔpreshɔn.

• Big kul fan ɛn indipɛndɛnt ɔt disipeshɔn chanɛl.

• I fayn fɔ CNC routers, engraving mashin, ɛn spindle motor sistem.

Teknik Paramita dɛn

• Produk: CNC VFD invεrta / vεriεbul frikכnshכn drayv

• Pawa: 1.5KW / 2HP, yu go yuz am

• Input vɔlɔt: Singl-faz 110V

• Otput v ɔ l t ɛ j: Tri-faz 110V

• Input frikshɔn: 50/60Hz

• Otput frikshɔn: 0–400Hz

• Aplikabl moto: Tri-faz 110V asynchronous CNC spindl moto nכmכ

• Dimenshɔn: 90 × 118 × 150mm / 3.5 × 4,65 × 5.9 inch

• Weyt: 1.3kg / 2.87lbs

Diskripshɔn fɔ di Prodak

Pre-Programmed CNC VFD fɔ Izi Sɛtup

Di VFD dɔn bi prɛ-program wit besik spindl paramita, so yuza dɛn nɔ nid fɔ kɔmplit kɔmpleks initial kɔnfigyushɔn bifo ɔpreshɔn. Di difɔlt maksimal frikshɔn na 400Hz, ɛn yu kin ajɔst di spindl spid tru di frikshɔn bɔtin ɔ di ɛksternal kɔntrol sistɛm.

Dis invɛrta na dizayn wit singl-faz input ɛn tri-faz ɔtput, we mek am prɛktikal chuk fɔ wokshɔp dɛn we de yuz 110V pawa saplai we dɛn de ɔpreshɔn tri-faz CNC spindl motoka dɛn.

Brek Resistor Kɔnɛkshɔn ɛn MODBUS485 Kɔmyunikeshɔn

Dis CNC VFD de sɔpɔt Mach3 ɛn MODBUS485 kɔmyunikeshɔn. Di bilt-in brek yunit alaw di invɛrta fɔ kɔnɛkt dairekt wit wan brek rɛsistɔ, ɛp fɔ impɔtant disilireshɔn pefɔmɛns ɛn spindl kɔntrol stebiliti insay CNC mashin aplikeshɔn dɛn.

Big Air Volume Kulin Fan

Di kul fan de gi mɔ pas 20% ay volyum fɔ ay pas ɔdinari fan dɛn. Wan indipɛndɛnt ɔt disipeshɔn ay chanɛl insay di VFD de ɛp fɔ protɛkt di sɔrkwit bɔd frɔm dɔst ɛn wata mist, we de sɔpɔt stebul ɔpreshɔn na CNC wokshɔp dɛn.

Bɔku Fɔlt Protɛkshɔn

Di invɛrta inklud bilt-in PID sɛtin, spid trakin, mɔlti-fɔnshɔn rilay ɔtput, bɔku fɔlt protɛkshɔn, bɔku stetɔs fidbak, tɔk kɔntrol, ɛn analɔg sɛtin. Dɛn wok ya de ɛp fɔ protɛkt di VFD ɛn spindl motoka we dɛn de du CNC routin ɛn engraving ɔpreshɔn.

High Torque na Low Spid

DSP vektor kontrכl de mek di spindl mכta ebul fכ achy hכy tכk di tεm we i de rכt lכw spid. Dɛd zon kɔmpɛnshɔn ɛn ɔtomɛtik tɔk difrɛns kɔmpɛnshɔn kin gi lɔw-frikyuɛnsi 0.25Hz ɛn 180% ay tɔk autput fɔ dimand CNC spindl aplikeshɔn dɛn.

Adjustable 16kHz Karia Frikshɔn

Di karia frikshɔn na adjɔstabl te to 16kHz. Otomatik vɔlɔt rigyuleshɔn teknɔlɔji de ɛp fɔ mek shɔ se VFD lod kapasiti ɛn stebul spindle moto pefɔmɛns di tɛm we dɛn de yuz CNC mashin.

Wiring Diagram fɔ VFD

Wayring Diagram Bitwin VFD ɛn Kɔntrol Bɔd

Dis VFD na aplikebul onli to tri-faz 110V asynchronous CNC spindl moto.

Konekt di spindle moto to di U / V / W tɛminal dɛn na di VFD.

Wetin Mek Dis CNC VFD Yunik?

• Disain fɔ 110V 1.5KW / 2HP CNC spindl moto aplikeshɔn dɛn.

• Pre-programmed besik paramita dɛn de ridyus sɛtup tɛm.

• Brek resistɔ kɔnɛkshɔn de sɔpɔt bɛtɛ disilireshɔn kɔntrol.

• DSP vektɔ kɔntrol de gi ay tɔk na lɔw spid.

• Bɔku fɔlt protɛkshɔn de mek di opareshɔnal sef bɛtɛ.

• Indipɛndɛnt kol chanɛl de ɛp fɔ ridyus dɔst ɛn mɔstɔ impak.

• Zhong Hua Jiang gɛt lɔng tɛm manufakchurin ɛkspiriɛns pan CNC spindl motoka, VFD, ɛn engraving mashin dɛn.

Brand ɛn Manufakchurin Bakgrɔn

Huajiang bin stat insay 2000, bigin wit di prodakshɔn fɔ CNC engraving spindle moto ɛn leta i expand to VFD variebul frikshɔn drayv ɛn engraving mashin. Di Zhong Hua Jiang brand bin establish insay 2018 fɔ sɔpɔt brayt intanashɔnal makit divɛlɔpmɛnt.

Di kɔmni gɛt ɛkspiriɛns fɔ mek CNC spindl motoka ɛn VFD prodak, ɛkspɔt to di glob makɛt, ɛn i de gi sɔpɔt to CNC router mashin yuza, distribyushɔn, ɛn B2B bayer.

FAQ we dɛn kin aks

Wetin spindle moto dis 1.5KW VFD kompitibul wit?

Dis VFD na suitable onli fo tri-faz 110V asynchronous CNC spindl moto. Nɔ fɔ yuz am wit motoka dɛn we nɔ de mach di vɔlɔt, faz, ɛn pawa we dɛn nid.

Dis VFD kin chenj singl-faz 110V to tri-faz 110V?

Yɛs. Di VFD de yuz singl-faz 110V input ɛn i de gi tri-faz 110V ɔtput fɔ kɔmpitabl CNC spindl motoka dɛn.

Dis CNC VFD na pri-program?

Yɛs. Di VFD na prɛ-program wit bɛsik paramita dɛn. Yuza dɛn kin ajɔst di frikshɔn akɔdin to di spindl RPM we dɛn nid, wit di difɔlt maksimal frikshɔn we dɛn sɛt na 400Hz.

Dis VFD de sopot Mach3 en MODBUS485?

Yɛs. Dis VFD de sɔpɔt Mach3 kɔntrol ɛn MODBUS485 kɔmyunikeshɔn, we de mek i fayn fɔ CNC router kɔntrol sistem dɛn.

A kin kɔnɛkt brek rɛsistɔ to dis VFD?

Yɛs. Di VFD inklud wan bilt-in brek yunit ɛn yu kin kɔnɛkt am dairekt to wan kɔmpitabl brek rɛsistɔ fɔ impɔtant disilireshɔn kɔntrol.

Us CNC aplikeshɔn dɛn de yuz dis VFD fɔ?

Dɛn kin yuz am fɔ CNC routers, CNC engraving mashin, wud wok mashin, ɛn ɔda ikwipmɛnt dɛn we nid variebul spid kɔntrol fɔ wan kɔmpitabl 110V tri-faz spindl motoka.