|
23HS2442P15 na ɛwɔ hɔ
Zhong Hua Jiang na ɔkyerɛwee
3.36V na ɛwɔ hɔ
4.2A
112mm na ɛwɔ hɔ
Zhong Hua Jiang 23HS2442P15 yɛ 57mm-frame (NEMA 23) abien-fase afrafra stepper motor a 1.8° anammɔn nyinaa anim. Winding data a wɔatintim no kyerɛ 3.36V wɔ phase biara mu, 4.2A rated phase current ne holding torque a ɛbɛyɛ 2.8 N·m. Ɛyɛ nea wɔahyɛ da ayɛ ama mfiridwumayɛfo, mfiri adansifo ne mfiridwuma mu adetɔfo a wɔpaw motion-control components ma CNC axes, automated positioning ne nnwinnade nkabom.
Asɛmfua 57mm stepper motor no kyerɛkyerɛ metric frame kɛseɛ a wɔtaa de bata NEMA 23. Ɛnsɛ sɛ wɔkyerɛ katalog listing a ɛde 'NEMA 57' di dwuma ase sɛ NEMA frame gyinapɛn a ɛyɛ soronko a wɔagye atom ama saa adeɛ yi. Hwɛ motor mfonini pɔtee ne ɔfã nɔma bere a ɛne mounting tokuru, shaft nsusuwii ne nnwinnade a ɛwɔ hɔ dedaw hyia no.
Motor mfonini a wɔde kyerɛkyerɛ mu wɔ ɔkwan a ɛkɔ akyiri so. Bisa model-specific product mfonini ne installation drawing a wɔapene so ama 23HS2442P15 ansa na woaka abom anaa woatɔ.
Wɔatintim nsɛm a ɛfa 23HS2442P15 ho:
| Mu | Nneɛma a Wɔakyerɛkyerɛ |
|---|---|
| Nkyɛmu Dodow | 2 |
| Anamɔn Angle | 1.8°±5% na ɛwɔ hɔ. |
| Rated Phase Voltage a ɛwɔ hɔ | 3.36V na ɛwɔ hɔ |
| Rated Mprempren | 4.2A |
| Phase Resistance a Ɛko Tia | 0.8 ohm±10% WƆ 20°C mu |
| Inductance a wɔde yɛ adwuma | 3.8 mH±20% WƆ 1kHz, 1Vrms |
| Torque a Wokura mu | Ɛboro 2.8 N·m (wɔakyerɛw sɛ ɛba fam koraa) . |
| Detent Torque a wɔde hyɛ nipadua mu | Ase 12 N·cm (wɔakyerɛw nea ɛsen biara) . |
| Rotor Inertia a Ɛyɛ Fɛ | 800 g.cm⊃2 na ɛwɔ hɔ; |
| Ɔkwan a Wɔfa so Di Kan | AWG22 UL1007 (hwɛ kɔbere-nhama a wɔakyerɛw) . |
| Insulation Adesuakuw no | NKYEKYƐMU B |
| Dielectric Ahoɔden a Wɔde Yɛ Adwuma | 500V AC, simma 1 |
| Insulation a Ɛko Tia | Ɛboro 100 MΩ |
| Thrust Load a wɔma ho kwan | 15N |
| Radial Load a wɔma ho kwan | 75 N (wɔ shaft awiei) . |
3.36V akontaabu no yɛ nominal winding voltage wɔ rated phase current, ɛnyɛ nea ɛkyerɛ sɛ abɔnten DC tumi a wɔde ma voltage ma stepper driver . Ɛsɛ sɛ wɔpaw drive supply voltage ne current-limit nhyehyɛe fi driver specification ne motor data a wɔapaw no mu.
Nya NEMA 23 Stepper Motor Boɔ a Wɔbɔ
Sɛ wopɛ adwuma no nhwehwɛmu a, fa ɔfã nɔma a edi mũ 23HS2442P15 ne motor tenten, phase current, winding resistance ne torque-speed curve a wɔsrɛɛ no hyia. Static holding torque nkyerɛ torque a ɛwɔ motor no adwumayɛ ahoɔhare nyinaa mu.
| Model No. | Anamɔn Angle | Motor Tenten | Voltage | Mprempren | Resistance | Inductance | Kura Torque | Inertia | Di Kan Style |
|---|---|---|---|---|---|---|---|---|---|
| (°) | (L)mm | V | A | Ω | mH | N·m | g.cm² | # # 1999 . | |
| 23HS2442P15 na ɛwɔ hɔ | 1.8 | 112 | 3.36 | 4.2 | 0.8 | 3.8 | 2.8 | 800 | AWG26 1061 (hwɛ kɔbere-haya ho kyerɛwtohɔ) . |
Wɔakyerɛw holding torque sɛ 2.8 N·m wɔ general specification no mu. Sɛ wopɛ mfiridwuma mu adetɔ ahyɛde a, si holding-torque bo a wɔahyɛ ho bɔ ne susuw tebea horow a ɛwɔ datasheet a wɔapene so no so dua. Motor nkyerɛkyerɛmu no kyerɛ kɔbere-haya adansi abien ( AWG22 UL1007 ne AWG26 1061 ); kyerɛ wire gauge a wɔhwehwɛ, insulation ne termination bere a worebisa quote.
Ananmusifo gyinapɛn ahorow no betumi asesa ne winding ne motor variant no pɛpɛɛpɛ. Sɛ wopɛ nsakraeɛ adwuma a, nso hwɛ sɛ shaft diameter, shaft projection, mounting dimensions, anyinam ahoɔden connector, phase wiring ne acceleration profile a wɔhwehwɛ.
Nsɛm a wɔatintim no nyinaa kyerɛw Class B insulation ma saa motor yi. Nneɛma a edidi so yi de ntotoho a wɔde gyina hɔ ma motor insulation adesuakuw ne sɔhwɛ tebea horow ho ka ho; insulation adesua afoforo a ɛwɔ reference chart no mu no nkyerɛ sɛ wɔde adesua nyinaa ma ma saa model yi.
| Insulation Level | Insulation Voltage | Insulation a ɛko tia |
|---|---|---|
| Adesuakuw B | 500V AC 1 Simma | Ɛboro 100 MΩ |
| Adesuakuw F | 500V AC 1 Simma | Ɛboro 100 MΩ |
Ɔhyew insulation adesuakuw no fa insulation-system ɔhyew tumi ho. Ɔhyew ankasa a wɔde yɛ adwuma no gyina mprempren nhyehyɛe, ɔhyew a atwa yɛn ho ahyia, mounting, adwuma kyinhyia ne mframa so.
| Ɔhyew adesuakuw a ɛwɔ insulation mu | A Level | E Level | B Level | F Level | H Level |
|---|---|---|---|---|---|
| Ɔhyew a ɛsen biara a wɔma ho kwan (°C) . | 105 | 120 | 130 | 155 | 180 |
| Winding ɔhyew a ɛkɔ soro anohyeto (K) . | 60 | 75 | 80 | 100 | 125 |
| Adwumayɛ ho nkyerɛkyerɛmu hyew (°C) . | 80 | 95 | 100 | 120 | 145 |
Motor nipadua tenten a wɔakyerɛw no yɛ 112mm . Wɔtaa frɛ 57mm frame NEMA 23 ; nanso, ɛsɛ sɛ wɔhwɛ mounting-hole pitch, shaft diameter, shaft tenten, flange details ne tolerances de to model-specific drawing no ho ansa na wɔasesa anaasɛ wɔayɛ no ntoatoaso.
Reference mfiri dimension mfonini. Fa 23HS2442P15 dimensional drawing a wɔapene so no di dwuma ma installation dimensions ne tolerances a etwa to.
Kyerɛ motor winding abien a ɛsono emu biara no ansa na woabɔ mu. Fa wiring ne lead-color assignment no di dwuma ma motor revision a wɔde ama no; kɔbere kɔla nkutoo nyɛ amansan nyinaa gyinapɛn a wɔde hu ɔfa. Twa draiver no ahoɔden mu ansa na woasesa motor nkitahodi ahorow no.
Nhwehwɛmu wiring mfonini ma abien-phase hybrid stepper motor; hwɛ sɛ winding-pair dwumadi ahorow ankasa no yɛ nokware.
Ofirikafo no na ɔhwɛ phase excitation sequence no so ma ɛkɔ na ɔkura rotor no. Motor a ɛyɛ 1.8° a wɔahyɛ da ayɛ no ma wonya anammɔn 200 a edi mũ wɔ akwanside biara mu . Microstepping betumi ama kankyee no ayɛ mmerɛw na ahyɛde no asiesie no atu mpɔn, nanso ɛnsɛ sɛ wɔde di dwuma sɛ awerɛhyem a ɛkyerɛ sɛ gyinabea a ɛyɛ pɛpɛɛpɛ koraa a ɛyɛ pɛ.
Reference phase excitation nnidiso nnidiso. Di stepper driver a wɔapaw no no adwumayɛ ho akwankyerɛ akyi.
Bisa Motor Drawing ne Wiring Details
Wɔabobɔ adwumayɛ ne sɔhwɛ tebea horow a wɔatintim no din wɔ ase ha. Fa di dwuma ne motor no mu nsakrae pɔtee ne nea ɔyɛe no nneɛma ho nsɛm a aba foforo bere a woreyɛ afiri bi ho nhyehyɛe no.
| Anamɔn Angle Pɛpɛɛpɛ | ±5% . |
|---|---|
| Resistance Pɛpɛɛpɛ | ±10% na ɛwɔ hɔ. |
| Inductance a Ɛyɛ Pɛpɛɛpɛ | ±20% na ɛwɔ hɔ. |
| Ɔhyew a Ɛkɔ soro | 80°C Max. |
| Ɔhyew a Ɛwɔ Atwa Yɛn Ho Ahyia | -20 ° C ~ + 50 ° C |
| Insulation a Ɛko Tia | 100MΩ Min 500V DC na ɛyɛ adwuma |
| Dielectric ahoɔden | 500V AC 1 Simma |
| Radial Load a wɔma ho kwan | 75N na ɛwɔ hɔ |
| Thrust Load a wɔma ho kwan | 15N |
Torque-speed evaluation: Torque a wɔde kura mu a wɔakyerɛw no yɛ gyinabea bo wɔ ahoɔden tebea horow a wɔakyerɛ mu. Torque a ɛwɔ hɔ bere a ɛrekɔ so no gu ahorow wɔ ahoɔhare, ahoɔden a wɔde ma, mprempren anohyeto, inductance, adesoa inertia ne drive nhyehyɛe. Bisa torque-speed curve ma applications a ɛhwehwɛ sɛ wɔakyerɛkyerɛ mu ahoɔhare, cycle bere anaa sustained running torque.
Ɔhyew ne mfiri nhwehwɛmu: Susuw motor ɔhyew a ɛkɔ soro, installation surface, axial ne radial shaft adesoa, coupling nhyehyɛe ne adwuma kyinhyia ho. Mfa bearing-load anohyeto ahorow no nni dwuma mfa nkyerɛ sɛ belt anaa lead-screw adesoa a wɔmfa mmoa no fata a wonhwɛ sɛnea wɔde di dwuma no geometry.
CNC routing ne engraving mfiri positioning axes, a ɛhyɛ torque a wɔagye atom ne mfiri a ɛfata ase.
Automated fixtures, indexing tables ne positioning mfiri a wɔde two-phase stepper control di dwuma.
Industrial mfiri upgrades baabi a ɛsɛ sɛ shaft, mounting, winding ne driver ne motor a ɛwɔ hɔ dedaw no hyia.
Kankyee nhyehyɛe a ɛhwehwɛ sɛ mfiridwuma mu nhwehwɛmu yɛ 1.8° anammɔn anim, kura torque ne adwumayɛ ahoɔhare.
Paw draiver a ɛwɔ phase abien a ɛboa motor no winding na wobetumi asiesie no ama 4.2A phase-current rating a wɔhwehwɛ . Hwɛ sɛnea draiver no kyerɛ peak versus RMS current, ne supported supply-voltage range, microstepping options, ahobammɔ dwumadi ne controller interface. Ɔdrɔbani a ɔde ma no ahoɔden ne 3.36V motor phase-voltage rating no nyɛ pɛ.
Aguadeɛ no ho nkyerɛkyerɛmu: 23HS2442P15 anaa ɔfa nɔma a wɔhwehwɛ sɛ wɔde sesa.
Mfiri ho nsɛm: mounting drawing, shaft dimensions, coupling ne installation space a ɛwɔ hɔ.
Electrical ho nsɛm: draiver model, output current nhyehyɛe, supply voltage, lead-wire ne connector ahwehwɛde.
Adwumayɛ tebea: adesoa inertia, ahoɔhare a wɔpɛ, ahoɔhare, adwuma kyinhyia ne ambient temperature.
Adetɔ ho nsɛm: dodow a wɔde asi wɔn ani so, baabi a wɔrekɔ ne biribiara a wɔsrɛɛ sɛ wɔmfa nkyerɛwde anaa mfoniniyɛ ho pene.
Bisa Mfiridwuma ne Aguadi Ho Nsɛm
Zhong Hua Jiang adwumakuw no nkyerɛkyerɛmu.
Zhong Hua Jiang adwumakuw no ho nsɛm.
Huajiang fii ne CNC engraving spindle-motor adwuma ase wɔ afe 2000 mu na akyiri yi ɔyɛɛ nneɛma a ɛfa ho, a variable frequency drives ne CNC engraving mfiri ka ho. Adwumakuw no de Zhong Hua Jiang ahyɛnsode no bae wɔ afe 2018 mu.
Yɛn nneɛma ahorow no boa CNC mfiri ne mfiridwuma mu kankyee-hwɛ dwumadie. Sɛ wopɛ stepper-motor adwuma a, kyɛ wo instɔlehyɛn mfonini ne draiver ho nsɛm sɛnea ɛbɛyɛ a wobetumi ahwɛ model a ɛfata ne mfiridwuma ho nkrataa.
Zhong Hua Jiang adwumayɛbea ne brand nkyerɛkyerɛmu.
Mfiridwuma mu adetɔ hwehwɛ sɛ wɔkyerɛ ɔfã bi a ɛkɔ so daa, mfonini ahorow a wotumi hwehwɛ mu ne nkitahodi a emu da hɔ a ɛfa anyinam ahoɔden ne mfiri nhyehyɛe ho. Zhong Hua Jiang betumi asusuw adwuma no ho nsɛm ne adetɔ ho ahwehwɛde ahorow ho denam n’adetɔn kuw no so.
| Quality Assurance Adwumayɛ a ɛkorɔn a ɛyɛ papa Nneɛma a ɛyɛ papa sohwɛ a emu yɛ den | Patents ne Certifications Patents pii a ɛfa spindle motors a mframa na ɛyɛ nwini ho | Additional Brand Value Brand boɔ a gua no gye tom kɛseɛ |
| Reasonable Price Direct factory sales Adwumayɛ a ɛho ka yɛ den kɛse | Bere nyinaa Ɔsom Adwumayɛfoɔ mfiridwuma ho mmoa Atɔfoɔ som a ɛbɛn na ɛyɛ ntɛm | Fast and Reliable Delivery Fast na etu mpɔn delivery nhyehyɛe Bere ankasa mu akyidi ne updates |
Zhong Hua Jiang adwumakuw ne ɔsom ho nkyerɛkyerɛmu.
Zhong Hua Jiang de Huajiang osuahu a ɔwɔ wɔ CNC spindle motors ne nnwinnade a ɛbata ho no si so. Ka motor options a ɛfata, adetɔ ho nkrataa ne order specifications ho asɛm ansa na woasi production nhyehyɛe bi so dua.
Company adansedi krataa ne krataa ho mfonini. Bisa adansedi nkrataa a ɛfa mfonini pɔtee bi ho anaa sɔhwɛ ho kyerɛwtohɔ ahorow sɛ ɛho hia ma wo adetɔ a.
Sɛ wopɛ nneɛma a wɔde fi amannɔne ba, mfiri a wɔpene so anaasɛ nea ɔde nneɛma ma no ahwehwɛde a, bisa nkrataa a ɛkyerɛ pefee sɛ mfiri a wɔkra anaa baabi a wɔde yɛ nneɛma a ɛfata. Ɛnsɛ sɛ wɔfa adansedi mfonini ne adwumakuw no adansedi nkrataa nyinaa sɛ adanse a ɛkyerɛ sɛ stepper motor ankorankoro biara wɔ pene koro.
Wɔ common motion-control catalogs mu no, wɔtaa ka 57mm square-frame stepper motor ho asɛm sɛ NEMA 23. Nkyerɛwde no kyerɛ frame category no, ɛnyɛ torque, current, shaft diameter anaasɛ mounting pattern pɔtee a ɛwɔ variant biara mu. Fa mfonini no si nsusuwii ahorow no so dua.
Wɔn a wɔde nneɛma ma no binom de 'NEMA 57' di dwuma wɔ ɔkwan a ɛnyɛ ɔkwan pa so ma 57mm metric-frame motor. NEMA din a egyina inch so a wonim no yiye ma saa kɛse yi ne NEMA 23. Hwɛ sɛnea ade no mfonini ne flange nsusuwii ahorow no yɛ nokware bere a wode nneɛma a wɔde ma no toto ho no.
Nhwɛsoɔ a wɔatintim no ne 23HS2442P15. Fa saa nkyerɛkyerɛmu yi ka adetɔ ahyɛde, draiver matching ne drawing requests ho.
Na listed nominal winding voltage yɛ 3.36V na rated phase mprempren yɛ 4.2A. Eyinom yɛ motor winding parameters, ɛnyɛ akwankyerɛ tẽẽ a wɔde paw ofirikafo ahoɔden a wɔde ma no.
Nkyerɛkyerɛmu a ɛwɔ hɔ nyinaa no kyerɛ torque a ɛkura mu a ɛsua koraa a ɛboro 2.8 N·m, na model table no kyerɛ 2.8 N·m. Wɔsusuw holding torque wɔ ahoɔden a wɔde gyina hɔ; adwumayɛ torque so tew anaasɛ ɛsakra bere a ahoɔhare ne drive tebea horow no.
Wɔakyerɛ motor no sɛ two-phase 1.8° hybrid stepper, a ɛne anammɔn 200 a edi mũ yɛ pɛ wɔ shaft revolution biara mu.
Wobetumi asusuw ho ama CNC positioning axes ne automation, sɛ torque-speed curve a wɔagye atom, mfiri a ɛfata, adwuma kyinhyia ne stepper driver no di mfiri no ahwehwɛde ahorow ho dwuma a.
Dabi 3.36V a wɔakyerɛw no yɛ nominal phase-winding voltage wɔ rated current no so. Stepper draiver a wɔahyɛ no mprempren no taa de DC supply a ɛyɛ soronko a wɔapaw sɛnea draiver ne application no ahwehwɛde te di dwuma.
Fa stepper draiver a ɛne no hyia a ɛwɔ phase-current nhyehyɛe a ɛfata di dwuma. Fa toto peak versus RMS mprempren nkyerɛase ahorow, supply-voltage anohyeto ahorow, microstepping modes ne motion-control interface a wɔhwehwɛ no ho.
Motor tenten a wɔatintim no yɛ 112mm. Hwɛ motor-specific mfonini no ma envelope no nyinaa, shaft projection ne mounting dimensions.
Fa wiring diagram no di dwuma ma motor revision ankasa anaasɛ fa sɔhwɛ mfiri a ɛfata susuw winding abien no. Ɛnsɛ sɛ wɔfa no sɛ kɔbere kɔla ne connector pinouts sɛ wotumi sesa wɔ mfonini ahorow ntam.
Ɛnyɛ nea ɛho hia ankasa. Torque a wokura mu no yɛ gyinabea a wɔde gyina hɔ; mmirikatu torque nya nkɛntɛnso denam motor inductance, drive voltage, ahoɔhare, mprempren nhyehyɛe ne nhyehyɛe adesoa. Bisa torque-speed curve ma mmeae a wopɛ sɛ woyɛ adwuma no.
Microstepping gyina stepper draiver a wɔapaw no so. Ɛsesa anammɔn a wɔahyɛ no gyinaesi na ebetumi ama smoothness atu mpɔn, nanso ɛnyi mfiri a ɛma abodwokyɛre mfi hɔ anaasɛ ɛmma awerɛhyem sɛ ɛyɛ pɛpɛɛpɛ koraa wɔ gyinabea pɛpɛɛpɛ.
The general motor specification lists Class B. Insulation reference charts a wɔatintim no nso kyerɛkyerɛ insulation class afoforo mu; si adesua ne sɔhwɛ a ɛfa ɔfã a wɔde ama no ho no so dua.
Nsonsonoe a wɔatintim no ne 75N a wɔma ho kwan radial adesoa wɔ shaft awiei ne 15N a wɔma ho kwan thrust adesoa. Hwɛ bearing adesoa tebea, mounting geometry ne motor mfonini ma ankasa mfiri.
General specification no kyerɛ AWG22 UL1007, bere a model table no kyerɛ AWG26 1061. Ɛsɛ sɛ wɔsi wire gauge ne insulation a ɛteɛ ma variant a wɔde ama pɛpɛɛpɛ no so dua wɔ order drawing ne wiring documentation no mu.
Fa botaeɛ fã nɔma, afiri dwumadie, draiver, mfonini a wɔhwehwɛ, shaft ne connector nsɛm, dodoɔ ne po so hyɛn destination ma. Eyi ma nea ɔde nneɛma ma no tumi hwɛ sɛnea ɛne ne ho hyia ne aguadi mu ahwehwɛde ahorow mu.
Ɛsɛ sɛ nea wɔde besi ananmu no ne mounting dimensions, shaft geometry, winding su, mprempren anohyeto, wiring ne torque a ɛho hia wɔ adwumayɛ ahoɔhare mu hyia. Matching nko ara 57mm frame size no nnɔɔso.
Di Zhong Hua Jiang ho nkɔmmɔ na woanya model 23HS2442P15 anaasɛ afoforo 57mm-frame stepper motor ahwehwɛde. Kyɛ mfiri mfonini, adwumayɛ torque a wɔhwehwɛ, draiver a wɔpɛ, wiring ahiade ne adetɔ dodow de boa mfiridwuma mu nhwehwɛmu ne quotation.
