NEMA 28 Stepper Motor High Torque 1.8 ° 2-Phase Hybrid Stepper ma CNC, 3D Printer, Robotics, Automation, DIY Nnwuma

  01 Nkyerɛkyerɛmu a Ɛfa Nsɛm Ho  

Saa NEMA 28 torque a ɛkorɔn 2 phase hybrid stepper motor yi yɛ nea wɔayɛ ama compact pɛpɛɛpɛ kankyee control nhyehyɛe. Ɛma 1.8° anammɔn anim, 3.8V rated voltage, 0.8A rated current, ne stable kura torque ma CNC mfiri, automation mfiri, robotics, 3D printers, ne OEM kankyee control nnwuma.

Adeɛ	Nsɛm a Wɔakyerɛkyerɛ mu
No. of Phases no	2
Anamɔn Angle	1.8° ±5% na ɛwɔ hɔ.
Voltage a wɔahyɛ da ayɛ	3.8V na ɛwɔ hɔ
Rated Mprempren	0.8A na ɛwɔ hɔ
Nkotia	5.6Ω ±10% wɔ 20°C mu
Inductance a wɔde yɛ adwuma	3.8mH ±20% wɔ 1kHz, 1Vrms
Torque a Wokura mu	Nea ɛboro 0.06Nm min.
Detent Torque a wɔde hyɛ nipadua mu	Ase 0.4N.cm max.
Rotor Inertia a Ɛyɛ Fɛ	9g.cm⊃2 na ɛwɔ hɔ;
Ɔkwan a Wɔfa so Di Kan	AWG26 UL1061 na ɛwɔ hɔ
Insulation Adesuakuw no	Adesuakuw B
Dielectric Ahoɔden a Wɔde Yɛ Adwuma	500V AC, simma 1
Insulation a Ɛko Tia	Sɛ ɛboro 100MΩ min.
Thrust Load a wɔma ho kwan	3N
Radial Load a wɔma ho kwan	21N wɔ shaft awiei

  02 Electrical Nkyerɛkyerɛmu  

Model No.	Anamɔn Angle	Motor Tenten a Ɛyɛ Fɛ	Voltage a ɛwɔ ahoɔden	Foforɔ	Nkotia	Inductance a wɔde yɛ adwuma	Torque a Wokura mu	Inertia a ɛnyɛ adwuma	Muduro
	°	L/mm	V. Ɔde ne nsa kyerɛɛ ne so	BI	Ω na ɛyɛ	mH	mN.m	g.cm⊃2 na ɛwɔ hɔ;	g
11HS3406 na ɛwɔ hɔ	1.8	53	3.8	0.67	5.6	3.8	60	9	110

  03 Nsusuwii  

  Wiring Mfonini a Wɔde Di Dwuma  

  04 Mfiridwuma Tebea Ahorow  

Anamɔn Angle a Ɛyɛ Pɛpɛɛpɛ	±5% na ɛwɔ hɔ.
Resistance Pɛpɛɛpɛ	±10% na ɛwɔ hɔ.
Inductance a Ɛyɛ Pɛpɛɛpɛ	±20% na ɛwɔ hɔ.
Ɔhyew a Ɛkɔ soro	80°C Max.
Insulation a Ɛko Tia	100MΩ Min. 500V DC na ɛyɛ adwuma
Dielectric Ahoɔden a Wɔde Yɛ Adwuma	500V AC 1 Simma
Radial Load a wɔma ho kwan	21N
Thrust Load a wɔma ho kwan	3N

  05 Mfaso a Ɛwɔ Nneɛma a Wɔyɛ So  

• 2 phase hybrid stepper motor ma pɛpɛɛpɛ kankyee control.

• 1.8° anammɔn anim boa gyinabea pɛpɛɛpɛ ne adwumayɛ a ɛkɔ so yiye.

• Compact NEMA 28 frame size ma instɔlehyɛn beae a anohyeto wom.

• 60mN.m kura torque ma automation a emu yɛ hare ne CNC dwumadie.

• Class B insulation ne 500V AC dielectric ahoɔden ma ahotoso adwumayɛ.

• Ɛfata ma OEM stepper motor nnwuma, CNC kankyee nhyehyɛe, ne automation mfiri.

  06 Nnwuma a Wɔde Di Dwuma  

• CNC router ne CNC engraving afiri axis control

• 3D printa ne mfiri nketewa a wɔde yɛ adwuma a wɔde yɛ adwuma

• Robotics ne nhyehyɛe ahorow a wɔde kyerɛ baabi a ɛwɔ pɛpɛɛpɛ

• Mfiri a wɔde kyekyere nneɛma ne nnwinnade a wɔde kyerɛw nneɛma

• Aduruyɛ ho nnwinnade ne nnwinnade a wɔde yɛ nhwehwɛmu

• Custom OEM kankyee control nhyehyɛe ahorow

  07 Aguadi ho adansedi krataa  

  FAQ  

Dɛn ne NEMA 28 stepper motor yi anammɔn kwan?

Anamɔn anim no yɛ 1.8° ±5%, a ɛboa gyinabea a ɛyɛ pɛpɛɛpɛ ma CNC, automation, robotics, ne motion control applications.

Dɛn ne voltage ne current a wɔahyɛ no?

Rated voltage yɛ 3.8V na rated current yɛ 0.8A.

Dɛn ne holding torque a ɛwɔ saa motor yi mu?

Torque a ɛkura no yɛ 60mN.m, ɛfata ma compact precision motion systems a ɛhia stable torque output.

Dɛn na saa 2 phase hybrid stepper motor yi fata?

Ɛfata ma CNC mfiri, mfiri a wɔde yɛ adwuma, robɔt, 3D tintim mfiri, mfiri a wɔde kyekyere nneɛma, mfiri a wɔde yɛ nhwehwɛmu, ne OEM kankyee sohwɛ nhyehyɛe.

So krataafa yi ka wiring diagram ne dimension drawing ho?

Aane. Afiri no kratafa no kura mfiri dimension mfonini ne wiring mfonini a ɛbɛboa mfiridwumayɛfo ma wɔasi installation space ne wiring ahwehwɛde ahorow so dua.