|
8HS4406 na ɛwɔ hɔ
Zhong Hua Jiang na ɔkyerɛwee
3.3V na ɛwɔ hɔ
50G na ɛwɔ hɔ
0.6A na ɛwɔ hɔ
60mm na ɛwɔ hɔ
Zhong Hua Jiang 8HS4406 yɛ 2-fase afrafra stepper motor a wɔayɛ ama pɛpɛɛpɛ nkɔanim kankyee wɔ compact CNC, automation, robɔt, gyinabea ne DIY kankyee-hwɛ nhyehyɛe. Motor no de 1.8° anammɔn a ɛyɛ pɛpɛɛpɛ di dwuma, a ɛne anammɔn a edi mũ 200 hyia wɔ kyinhyia biara mu, na wɔakyerɛ sɛ ɛyɛ 3.3V ne 0.6A.
Ɛnam sɛ ɛwɔ listed holding torque above 0.026 N·m, Class B insulation, AWG26 UL1061 leads ne compact motor structure, saa NEMA 20 stepper motor yi yɛ nea wɔayɛ ama applications a repeatable positioning, controlled low-speed motion ne compact installation ho hia. Sɛ wopɛ sɛ woyɛ adwuma yiye a, fa stepper driver current setting, supply voltage, acceleration profile ne mechanical load no hyia motor ne machine ahwehwɛde ahorow.
Bisa NEMA 20 Stepper Motor Boɔ a Wɔbɔ
| Adeɛ | Nsɛm a Wɔakyerɛkyerɛ mu |
| No. of Phases no | 2 |
| Anamɔn Angle | 1.8° ±5% na ɛwɔ hɔ. |
| Voltage a wɔahyɛ da ayɛ | 3.3V na ɛwɔ hɔ |
| Rated Mprempren | 0.6A na ɛwɔ hɔ |
| Nkotia | 5.5 Ω ±10% wɔ 20°C mu |
| Inductance a wɔde yɛ adwuma | 2.3 mH ±20% wɔ 1 kHz, 1 Vrms |
| Torque a Wokura mu | Ɛboro 0.026 N·m |
| Detent Torque a wɔde hyɛ nipadua mu | Ase 0.5 N·cm max. |
| Rotor Inertia a Ɛyɛ Fɛ | 4.5 g·cm⊃2 na ɛwɔ hɔ; |
| Ɔkwan a Wɔfa so Di Kan | AWG26 UL1061 na ɛwɔ hɔ |
| Insulation Adesuakuw no | Adesuakuw B |
| Dielectric Ahoɔden a Wɔde Yɛ Adwuma | 500V AC ma simma 1 |
| Insulation a Ɛko Tia | Ɛboro 100 MΩ |
| Thrust Load a wɔma ho kwan | 2N |
| Radial Load a wɔma ho kwan | 20N wɔ shaft awiei |
1.8° anammɔn anim no ma anammɔn 200 a edi mũ wɔ kyinhyia biara mu. Microstepping draiver a ɛne no hyia betumi akyekyɛ anammɔn biara a edi mũ mu ama ayɛ mmerɛw, nanso gyinabea a ɛyɛ pɛpɛɛpɛ ankasa gyina draiver, adesoa, mfiridwuma, ahoɔhare, resonance ne control nhyehyɛe so.
| Model No. | Anamɔn Angle | Motor Tenten a Ɛyɛ Fɛ | Voltage a ɛwɔ ahoɔden | Foforɔ | Nkotia | Inductance a wɔde yɛ adwuma | Torque a Wokura mu | Inertia a ɛnyɛ adwuma | Muduro |
| (°) . | (L) mm | V. Ɔde ne nsa kyerɛɛ ne so | BI | Ω na ɛyɛ | mH | mN·m | g·cm⊃2 na ɛwɔ hɔ; | g | |
| 8HS4406 na ɛwɔ hɔ | 1.8 | 60 | 3.3 | 0.6 | 5.5 | 2.3 | 26 | 4.5 | 50 |
Nneɛma a ɛwɔ atifi hɔ no yɛ nkyerɛkyerɛmu a wɔakyerɛ ama ananmusifo 8HS4406 ade a ɛwɔ kratafa yi so. Wobetumi aka nhyehyeɛ soronko ho asɛm sɛdeɛ application ahwehwɛdeɛ teɛ. Sɛ worepaw draiver a, fa motor no rated phase current ne driver no current-control tumi di kan sen sɛ wobɛpaw denam motor no rated voltage nkutoo so.
| Insulation Level a Ɛwɔ Hɔ | Insulation Voltage a ɛwɔ hɔ | Insulation a Ɛko Tia |
| Adesuakuw B | 500V AC, simma 1 | Ɛboro 100 MΩ |
| Adesuakuw F | 500V AC, simma 1 | Ɛboro 100 MΩ |
Motor insulation class kyerɛkyerɛ ɔhyew-a ɛko tia ɔfã a ɛwɔ insulation nhyehyɛe no mu. Nneɛma a wɔde fi mu no kyerɛw A, E, B, F ne H ɔhyew adesuakuw ahorow. 8HS4406 general specification a ɛwɔ kratafa yi so no kyerɛ sɛ motor no yɛ Class B.
| Temperature Class a Wɔde Siesie Nneɛma a Wɔde Siw Ano | A Level bi | E Level no | B Level no | F Level a ɛwɔ hɔ | H Level a ɛwɔ hɔ |
| Ɔhyew a Ɛsen Biara a Wɔma Ho Kwan (°C) . | 105 | 120 | 130 | 155 | 180 |
| Winding Ɔhyew a Ɛkɔ soro Anohyeto (K) . | 60 | 75 | 80 | 100 | 125 |
| Adwumayɛ ho nkyerɛkyerɛmu Ɔhyew (°C) . | 80 | 95 | 100 | 120 | 145 |
Ansa na wode motor no bɛka CNC axis, linear stage, robɔt mfiri anaa amanne afiri mu no, hwɛ sɛ flange, shaft, mounting-hole pattern, installation space a ɛwɔ hɔ ne coupling dimensions no hyia mfiri mfonini no.
Fa motor phases abien no bata A ne B outputs a ɛne no hyia a ɛwɔ bipolar stepper driver a ɛne no hyia no ho sɛnea wiring diagram no kyerɛ no. Si coil abien abien no so dua ansa na wode ahoɔden ahyɛ mu, na dum draiver no ansa na woasesa motor wiring.
Stepper driver no ma ahoɔden wɔ phase abien no mu nnidiso nnidiso ma ɛyɛ ahinanan a wɔahyɛ so. Full-step, half-step ne microstepping suban gyina draiver ne controller no so. Mprempren anohyeto a ɛteɛ ho hia ma torque, ɔhyew a ɛkɔ soro ne motor nkwa.
| Anamɔn Angle a Ɛyɛ Pɛpɛɛpɛ | ±5% na ɛwɔ hɔ. |
| Resistance Pɛpɛɛpɛ | ±10% na ɛwɔ hɔ. |
| Inductance a Ɛyɛ Pɛpɛɛpɛ | ±20% na ɛwɔ hɔ. |
| Ɔhyew a Ɛkɔ soro | 80°C a ɛboro so. |
| Ɔhyew a Ɛwɔ Atwa Yɛn Ho Ahyia | -20°C kosi +50°C |
| Insulation a Ɛko Tia | 100 MΩ simma, 500V DC |
| Dielectric Ahoɔden a Wɔde Yɛ Adwuma | 500V AC, simma 1 |
| Radial Load a wɔma ho kwan | 20N |
| Thrust Load a wɔma ho kwan | 2N |
Ɛsɛ sɛ wosusuw saa abodwokyɛre ne adwumayɛ tebea horow yi ho bere a wɔreyɛ kankyee-nhyehyɛe no. Torque a ɛwɔ hɔ ankasa so tew bere a ahoɔhare kɔ soro no, enti ɛsɛ sɛ wɔne ofirikafo no bom susuw motor no ho, supply voltage, load inertia, acceleration, transmission ratio ne adwumayɛ ahoɔhare a wɔhwehwɛ.
Wobetumi asusuw 8HS4406 2-phase hybrid stepper motor no ho ama compact motion-control nnwuma te sɛ CNC mfiri nketewa, desktop automation, robotics, positioning stages, dispensing mfiri, camera anaa optical positioning, sɔhwɛ mfiri, nkyerɛkyerɛ mfiri ne custom DIY motion systems a torque ne adesoa a wɔhwehwɛ no da so ara wɔ motor no adwumayɛ tumi mu.
Sɛ wopɛ sɛ wopaw a, fa ahoɔhare a wɔhwehwɛ, adesoa torque, ahoɔhare, adwuma kyinhyia, shaft adesoa, mounting dimensions, driver model ne available supply voltage ma. Wei ma wotumi de motor, driver current setting ne mechanical transmission no hyia pɛpɛɛpɛ.
Send Wo Motion Ahwehwɛde ahorow no
Wɔde Huajiang sii hɔ wɔ afe 2000 mu, efii ase wɔ CNC engraving spindle motor production na akyiri yi ɛtrɛw kɔɔ VFDs, engraving mfiri ne nea ɛfa ho motion-control products. Wɔde Zhong Hua Jiang ahyɛnsodeɛ no sii hɔ wɔ afe 2018 mu sɛ ɛbɛboa amanaman ntam-gua nkɔsoɔ a ɛtrɛ.
Adwumakuw no wɔ tumi krataa a wɔakyerɛw din wɔ spindle motor ahorow a mframa ma ɛyɛ nwini ho, tumi krataa a ɛto so 200730184245.5, na wɔaboaboa bɛboro mfe 20 osuahu ano wɔ nneɛma a ɛfa CNC ho a wɔyɛ mu.
 |
||
| Quality Assurance Quality-control akwan a wɔfa so hwɛ nneɛma no adwumayɛ ne nneɛma a wɔde mena no mu nhwehwɛmu. |
Patents ne Certifications Bere tenten CNC adwumayɛ mu osuahu ne patented spindle nhyehyɛe. |
Brand Value Integrated product support ma CNC mfiri, spindles, motors, drives ne nneɛma a wɔde boa. |
 |
||
| Reasonable Price Direct adwumayɛbea nkitahodi ma specifications, dodow ne customization. |
Bere Nyinaa Ɔsom Mmoa ma motor paw, ofirikafo nhyiam ne application nsɛmmisa. |
Fast and Reliable Delivery Production nhyehyɛe, export som ne shipment updates. |
Adansedi ahwehwɛde ahorow betumi ayɛ soronko wɔ gua a wɔde kɔ ne nnwinnade a etwa to no mu. Wɔ OEM anaa batch orders ho no, bisa mprempren nneɛma ho nkrataa a ehia ma wo application no na si gyinapɛn a wɔhwehwɛ sɛ wodi so no so dua ansa na woatɔ.
Wɔayɛ ama compact motion-control applications a ɛhwehwɛ sɛ wɔsan yɛ angular positioning, a CNC mfiri nketewa, automation mfiri, robotics, positioning stages, test fixtures ne low-load motion systems afoforo a ɛne motor no torque ne adwumayɛ tebea hyia ka ho.
1.8° full-step motor wɔ anammɔn 200 a edi mũ wɔ revolution biara mu efisɛ 360° a wɔakyekyɛ mu 1.8° yɛ pɛ 200. Microstepping driver betumi akyekyɛ anammɔn a edi mũ yi mu ama ayɛ mmerɛw.
Nkyerɛkyerɛmu a ɛwɔ kratafa yi so no kyerɛ voltage a wɔahyɛ sɛ ɛyɛ 3.3V ne current a wɔahyɛ ato hɔ a ɛyɛ 0.6A. Sɛ wode stepper driver a wɔde current di dwuma redi dwuma a, hyehyɛ phase current no sɛnea motor ne driver no akwankyerɛ kyerɛ.
Fibea nkyerɛkyerɛmu no kyerɛ sɛ wokura torque a ɛboro 0.026 N·m, a ɛne 26 mN·m yɛ pɛ. Mmirikatu torque a ɛwɔ hɔ no bɛyɛ nea ɛba fam sen holding torque na mpɛn pii no ɛso tew bere a motor ahoɔhare kɔ soro no.
Fa bipolar 2-phase stepper driver a ebetumi ahwɛ phase current a atwa motor no 0.6A rating ho ahyia na ɛne wo controller ne supply voltage hyia. Si so dua sɛ ofirikafo no current range a ɛba fam ne nea ɛsen biara ansa na wode wire ahyɛ motor no mu.
Yiw, bere a wɔde abɔ microstepping draiver a ɛne no hyia ho no. Microstepping betumi atew wosow so na ama kankyee ayɛ mmerɛw, ɛwom sɛ ɛnsɛ sɛ wɔfa microstep kɛse a wɔahyɛ no sɛ mfiri a wɔde si hɔ pɛpɛɛpɛ a wɔahyɛ ho bɔ wɔ adesoa ase de.
Aguade no ho nkyerɛkyerɛmu kyerɛ sɛ motor no yɛ Class B insulation. Fibea insulation pon no kyerɛ 130°C sɛ ɔhyew a ɛsen biara a wɔma ho kwan ma Class B insulation, bere a adwumayɛ mfiridwuma tebea horow no kyerɛ ɔhyew a ɛsen biara a ɛkɔ soro 80°C.
Fa motor no nhwɛso, mounting nsusuwii, shaft nsusuwii, adesoa torque, botae ahoɔhare, ahoɔhare, adwuma kyinhyia, ofirikafo nhwɛso, supply voltage, wiring ahwehwɛde, dodow ne awiei dwumadie ma. Eyi boa ma wosi so dua sɛ ebia 8HS4406 no fata anaasɛ stepper motor soronko bi ho hia.
Mfitiaseɛ nneɛma ho nsɛm ka sɛ wobetumi ayɛ nneɛma a wɔbisa titire sɛdeɛ adetɔfoɔ ahwehwɛdeɛ teɛ. Di adetɔn kuw no ho nkɔmmɔ na fa anyinam ahoɔden, mfiri, kɔbere-haya ne dodow ho nkyerɛkyerɛmu a wɔhwehwɛ ma wɔayɛ nhwehwɛmu.
