Air Cooled Spindle Motor Maintenance: Bugun, Fan saniya, Bearing ɲɛnamaya, ani funteni kɔlɔsili

Aw ka CNC spindle bɛ se ka dɛsɛ kabini waati jan sani a waati ka se.

Bugun, funteni ani fiɲɛ barikama ka teli ka tiɲɛni kɛ u makuntɔ.

O de kama Air Cooled Spindle Motor ladonni nafa ka bon.

CNC routeurs ni graving machines fɛ, ko misɛnninw bɛ nɔ bila teliya la tiɲɛni na.

Fiɲɛbɔyɔrɔ nɔgɔlenw, fiɲɛbɔlanw gɛlɛyaw, birikiw sɛgɛnnenw, ani VFD sigicogo jugu bɛ se ka tigɛcogo sabatibali lase.

Nin sɛbɛn in kɔnɔ, aw bɛna buguri kunbɛncogo dɔn, ka fiɲɛbɔlanw saniya, ka birikiw lakana, ani ka funteni dɔgɔya.

Aw bɛna a ye fana cogo min na Zhong Hua Jiang spindles bɛ nɛnɛ sabatili dɛmɛ.

U bɛ baara kɛ ni fiɲɛbɔlanw ye minnu bɛ don u kɔnɔ, funteni bɔli finw, ani VFD suganditaw minnu bɛ bɛn ɲɔgɔn ma.

 

Bugun kɔlɔsili ka ɲɛsin fiɲɛ nɛnɛma spindle motɛri dannaya ma

Bugun bɛ i n’a fɔ farati tɛ fosi la fo ka se sɔgɔsɔgɔninjɛ ka boli ka funteni daminɛ ka tɛmɛ a cogo kɔrɔ kan. CNC butiki dɔ kɔnɔ, nɔgɔ finmanw bɛ taa yɔrɔ bɛɛ. A bɛ jigin fiɲɛbɔyɔrɔw kan, fiɲɛbɔlanw kan, nɛnɛbɔlanw kan, kabali jogindaw kan, ani hali biriki sigilanw kɛrɛfɛ. Ka da a kan Air Cooled Spindle Motor , nin ye gɛlɛyaba ye bawo nɛnɛ bɛ bɔ fiɲɛ saniyalen na.

Ni fiɲɛ bɛ sumaya, funteni bɛ to sɔgɔsɔgɔninjɛ farikolo kɔnɔ. O kɔfɛ, motɛri bɛ baara kɛ kosɛbɛ, birikiw bɛ tɔɔrɔ, ani tigɛcogo bɛ dɔgɔya. Zhong Hua Jiang fiɲɛbɔlanw bɛ baara kɛ ni nɛnɛbɔlan ye min bɛ aksidan na ani aliminiyɔmu funteni bɔli finw, o la, ka o yɔrɔw saniya, o tɛ kɛ i yɛrɛ sago ye. O ye spindle ladonni jɔnjɔn ye.

Bugun bɛ fiɲɛ nɛnɛnen motɛri tiɲɛ cogo di?

A ka c’a la, buguri tiɲɛni bɛ daminɛ dɔɔni dɔɔni. N’a sɔrɔ aw tɛna a kɔlɔsi tile fɔlɔ la. Nka, dɔgɔkun damadɔw kɔfɛ, sɔgɔsɔgɔninjɛ mankan bɛ se ka bonya, ka boli ka sumaya, walima ka tigɛ taamasiɲɛ gɛlɛnw to. O waati de la baarakɛla caman b’a faamuya ko fiɲɛbɔ sira nɔgɔlen don kaban.

Atelier minɛn suguya caman bɛ farati suguya caman lase mɔgɔ ma:

Ko min ka teli ka kɛ, o ye fiɲɛbɔ balili ye. Fana bɛ se ka wuli hali bi, nka fiɲɛ dɔɔni bɛ se yɔrɔw la minnu ka suma. Nɛnɛ finmanw fana tɛ baara kɛ ni buguri nɔrɔlen don u sanfɛla la. Ni a girinya ka bon, nɔgɔ finmanw bɛ se ka taa biriki sigilanw fan fɛ ani ka biriki sɛgɛn teliya.

Don o don buguri saniyacogo jumɛnw kɛbagaw ka kan ka tugu?

Saniyacogo nɔgɔman bɛ se ka sɔgɔsɔgɔninjɛ kisi. Masina jiginni kelen-kelen bɛɛ kɔfɛ, aw bɛ nɛnɛyɔrɔw saniya sani buguri ka gɛlɛya walima ka pake ka don nkɔni na. Aw bɛ fiɲɛ jalen degunlen kɛ, nka aw bɛ a degun to a la. Laɲini ye ka buguri bɔ, a kana a gɛrɛ a kɔnɔ ka taa a fɛ.

I sinsin o yɔrɔw kan don o don:

• Aw bɛ buguri fiyɛ ka bɔ fiɲɛbɔyɔrɔw ni fiɲɛbɔyɔrɔw la. Aw bɛ fiɲɛbɔlan lamaga ka sɔgɔsɔgɔninjɛ farikolo lamini sanni aw ka a minɛ ka surunya kojugu. O bɛ dɛmɛ ka nɔgɔw lajɔ ka bɔ yɔrɔw la minnu tɛ kelen ye. Aw bɛ a lajɛ ni fiɲɛbɔ bɛ kɛ hali saniya kɔfɛ.

• Aw bɛ fiɲɛbɔlanw saniya ka ɲɛ ni u bɛ ye. Bugun min bɛ nɛgɛ fan kelen na, o bɛ se ka kɛ sababu ye ka balanbaliya bila a la. O balanbaliya bɛ se ka yɛrɛyɛrɛ, mankan ani doni wɛrɛ lase motɛri ma.

• Aw bɛ spindle kɛnɛma finw ni jiginni yɔrɔw jɛlenw kɛ. O yɔrɔw bɛ dɛmɛ ka funteni bɔ tigɛ waati. Ni u datugulen tora buguri fɛ, sɔgɔsɔgɔninjɛ farikolo bɛ se ka sumaya joona baara janw senfɛ.

• Aw bɛ ventilateur datugulan ni a lamini karamɔgɔ ko. Datugulan nɔgɔlen bɛ se ka fiɲɛbɔli bali hali ni fiɲɛbɔlan yɛrɛ bɛ baara kɛ ka ɲɛ. O senna-tɛgɛrɛ fitinin in bɛ tɛmɛ tuma caman na butikiw kɔnɔ minnu falen bɛ mɔgɔw la.

Mun na CNC masinw ka kan ka baara kɛ ni buguri fɛnɲɛnamafagalanw ye walima ka fɛnɲɛnamafagalanw lajɛ?

Ka sɔgɔsɔgɔninjɛ saniya baara kɔfɛ, o nafa ka bon. Ka buguri jɔ sani a ka se sɔgɔsɔgɔninjɛ ma, o ka fisa. Bugun dabɔlan walima vacuum lajɛlan bɛ jirimugu, MDF buguri ani sɔgɔsɔgɔninjɛ minɛ tigɛyɔrɔ kɛrɛfɛ. O bɛ nɛnɛbɔyɔrɔ saniya ka mɛn.

CNC routeur minnu bɛ MDF walima jiri tigɛ tile bɛɛ, vacuum lajɛ nafa ka bon kosɛbɛ. MDF mugu ɲuman bɛ se ka pake ka ɲɛ fiɲɛbɔyɔrɔw ni finw lamini na. A bɛ kɛ i n’a fɔ insulasi. Ni a cayara dɔrɔn, funteni kunbɛnni bɛ gɛlɛya kosɛbɛ.

Bugun lajɛ ɲuman fana bɛ baarakɛla dɛmɛ. Masin bɛ to ka saniya, baarakɛminɛnw siraw sɛgɛsɛgɛli ka nɔgɔn, wa a ladonni tɛ waati caman ta. A tɛ spindle saniya nɔ bila, nka a bɛ dɔ bɔ buguri hakɛ la min bɛ se Air Cooled Spindle Motor ma.

Mun bɛ kɛ ni buguri kɔlɔsili ma jate?

A ka c’a la, buguri min ma jate, o bɛ wuli ka kɛ cakɛda gɛlɛya ye. Fɔlɔ, fiɲɛbɔ bɛ barika dɔgɔya. O kɔ, funteni bɛ daminɛ ka bonya sɔgɔsɔgɔninjɛ kɔnɔ. O kɔfɛ, birikiw, bobinew ani tigɛcogo ɲuman bɛɛ bɛ degun caman sɔrɔ.

O kɔlɔlɔ minnu bɛ sɔrɔ tuma caman na, olu ye:

• Funteni dalajɛli sɔgɔsɔgɔninjɛ farikolo kɔnɔ. A bɛ se ka kɛ ko a kɔnɔna ka suma ka tɛmɛ a cogo kɔrɔ kan tigɛtuma na. Ni o tora sen na, motɛri bobinew bɛ se ka kɔrɔ joona ani ka dannaya tiɲɛ.

• Biriki sɛgɛn teliya la. Funteni ni nɔgɔ bɛ dɔ fara ɲɔgɔnkanu kan yɔrɔw lamini na minnu bɛ lamaga. Aw bɛ se ka sɔgɔsɔgɔninjɛ mankan mɛn, min bɛ sɔgɔsɔgɔ, walima min ka gɛlɛn ka tɛmɛ o kan ni aw bɛ baara kɛ teliya la.

• RPM sabatibali ani tigɛcogo jugu. A bɛ se ka kɛ ko sɔgɔlilan bɛ boli hali bi, nka a tigɛlen bɛ se ka kɛ i n’a fɔ a ka gɛlɛn. Baarakɛminɛnw taamasiyɛnw, yɛrɛyɛrɛli, ani ja dunni min tɛ bɛn ɲɔgɔn ma, olu bɛ se ka ye.

• Spindle ka baarakɛ waati surunya. Spindle bɛ se ka tiɲɛ joona hali ni fanga hakɛ bɛnnen don. O sababu yɛrɛ bɛ se ka kɛ fiɲɛbɔyɔrɔw datugulenw ye, finw nɔgɔlenw, walima fiɲɛbɔlan min bɛ baara kɛ buguri doni kɔrɔ.

• Masinaw ka tiɲɛni dɔgɔyali. Biriniw sɛgɛn bɛ se ka kɛ sababu ye ka baarakɛminɛnw boli ani ka jiribolo wuli. O kɔrɔ ye ko fɛn tiɲɛnenw ka caya, ka baara kɛ kokura, ani ka fɛn dilanni waati tiɲɛ ka caya.

Fan saniya ani fiɲɛbɔcogo sɛgɛsɛgɛli fiɲɛ nɛnɛma spindle motɛriw kan

Fan ye nɛnɛ baarakɛla ŋana ye Air Cooled Spindle Motor kɔnɔ. A bɛ funteni sama ka bɔ sɔgɔsɔgɔninjɛ farikolo la, o kɔ, a bɛ wuluwuluw dɛmɛ k’a bɔ joona. Ni fiɲɛbɔlan nɔgɔlen don, ka kɔrɔta, ka lajɔ, walima ni a barika banna, funteni kunbɛnni bɛ gɛlɛya kosɛbɛ tigɛtuma na.

Zhong Hua Jiang ka fiɲɛ nɛnɛma spindle motɛriw kama, axial fan min bɛ a kɔnɔ, o bɛ baara kɛ ɲɔgɔn fɛ ni aluminiyɔmu funteni bɔli finw ye. Nin dilancogo in bɛ ji pɔnpew ni nɛnɛbɔlanw bali, nka a bɛ bɔ fiɲɛ saniyalen na. O la, fan saniya tɛ ko fitinin ye. O ye teliya, tiɲɛni ani baara ɲɛnamaya sabatili sabatili dɔ ye.

Siɲɛ joli ka kan ka fiɲɛbɔlan lajɛ?

Butigi saniyalen kɔnɔ, a ka c’a la, ka fiɲɛbɔlan lajɛ baarakɛdon damadɔ o tile damadɔ, o bɛ bɔ. CNC atelier bugurilama kɔnɔ, aw bɛ a lajɛ ka caya. MDF mugu, jiri buguri, akiriliki sɔgɔlenw, ani nɔgɔ finmanw bɛ se ka lajɛ joona fiɲɛbɔlan datugulan kɛrɛfɛ.

Sɛgɛsɛgɛli nɔgɔman tɛ miniti kelen bɔ:

Aw bɛ o kɛ sani aw ka baara janw kɛ. Aw bɛ a lajɛ fana buguri gɛlɛn baara kɔfɛ. A ka nɔgɔn ka fiɲɛbɔlan saniya joona ka tɛmɛ ka fɛnɲɛnamafagalan tiɲɛnen dɔ bila a nɔ na kɔfɛ.

Baarakɛlaw ka kan ka fiɲɛbɔlanw saniya cogo di ka ɲɛ?

Aw bɛ masin kuran faga tuma bɛɛ fɔlɔ. Aw bɛ makɔnɔni kɛ fo sɔgɔsɔgɔninjɛ ka jɔ pewu, o kɔ aw bɛ fiɲɛbɔlan so bɔ ka ɲɛ. Aw kana kɔrɔtɔ abada nin yɔrɔ in na, barisa fiɲɛbɔlan kurulen bɛ se ka yɛrɛyɛrɛ bila kɔfɛ.

Aw bɛ nin fɛɛrɛ ninnu kɛ walasa ka saniya kɛ cogo la min tɛ mɔgɔ tɔɔrɔ:

• Aw bɛ buguri lafiyalen bɔ fɔlɔ. Aw bɛ fiɲɛ jalen digilen kɛ ni tansiyɔn kɔrɔtalen ye. Aw bɛ fiyɛlilan yɔrɔ janya dɔɔni fiɲɛbɔlan na. O bɛ dɛmɛ ka buguri kɔrɔta sanni k’a gɛrɛntɛ ka taa a fɛ a kɔnɔna na.

• Aw bɛ fiɲɛbɔlanw ko dɔɔni dɔɔni. Burusi nɔgɔlen bɛ baara kɛ ka ɲɛ ka tɛmɛ baarakɛminɛn gɛlɛn kan. Aw bɛ bɔgɔdaga kelen-kelen bɛɛ fan fila bɛɛ saniya, barisa buguri min tɛ kelen ye, o bɛ se ka fiɲɛbɔlan balansi tiɲɛ.

• Aw bɛ aw yɛrɛ tanga ka nɛgɛw kɔrɔta walima ka u digidigi. Hali ni a kurulen don dɔɔnin, o bɛ se ka kɛ sababu ye ka balanbaliya fanga la. O kɔfɛ, sɔgɔli bɛ se ka yɛrɛyɛrɛ, ka mankan gɛlɛn, walima ka boli ka ɲɛ kosɛbɛ ni teliyaba ye.

• Aw bɛ fiɲɛbɔlan datugulan saniya sani aw ka a sigi kokura. Bugun min bɛ datugulan kan, o bɛ se ka fiɲɛ bɔli bali tuguni. Aw bɛ a lajɛ ni juruw sirilen don, nka aw kana plastiki yɔrɔw siri kojugu.

Sariya ɲuman ka nɔgɔn. Aw bɛ fiɲɛbɔlan saniya i n’a fɔ a ye yɔrɔ ye min bɛ kɛ ka ɲɛ, a tɛ kɛ atelier kɔnɔfɛn ye.

Taamaʃyɛn jumɛnw b’a jira ko nɛnɛbɔlan bɛ se ka tiɲɛ?

Fana dɛsɛ tɛ daminɛ tuma bɛɛ i n’a fɔ a jɔli dafalen. A ka ca a la a bɛ daminɛ ni mankan ye, fiɲɛbɔ barikama, walima funteni jiginni. Ni an ye o taamasiɲɛw minɛ joona, an bɛ se ka an yɛrɛ tanga sɔgɔsɔgɔninjɛ gɛlɛyabaw ma.

Aw ye aw janto nin taamasiɲɛ ninnu na don o don tali kɛtuma na:

• Fana mankan min tɛ cogo la walima min tɛ kelen ye, o bɛ bɔ daminɛ waati.

• Fana wulicogo bɛ i n’a fɔ a bɛ kɛ dɔɔni dɔɔni, a bɛ yɛrɛyɛrɛ, walima a bɛ mɛn sen na kuran daminɛ kɔfɛ.

• Fiɲɛbɔ bɛ kɛ i n’a fɔ a barika ka dɔgɔn ka tɛmɛ a cogo kɔrɔ kan bɔyɔrɔ kɛrɛfɛ.

• Fan tɛ wuli, hali ni sɔgɔsɔgɔninjɛ bɛ boli.

• Spindle farikolo bɛ funteni teliya la tigɛcogo nɔgɔman waati.

• Yɛrɛyɛrɛli wɛrɛw bɛ bɔ ventilateur saniyalen kɔfɛ walima ventilateur (fiɲɛbɔlan) gosili kɔfɛ.

• Tigɛ bɛ kɛ fɛn ye min tɛ sabati kosɛbɛ sɛnɛko boli janw senfɛ.

Aw kana aw ɲɛmajɔ o taamasiɲɛw la. Fan barikama bɛ se ka tigɛ funteni normal wuli ka kɛ doni tɛmɛnen ko yɛrɛ ye. Ni fiɲɛbɔlan karilen don, ni a tigɛra, walima ni a kɔrɔla, aw bɛ a falen ni yɔrɔ bɛnnen ye min bɛ bɛn a ma.

Mun na yɔrɔ dafalen min bɛ sɔgɔsɔgɔninjɛ lamini, o nafa ka bon?

Air Cooled Spindle Motor mago bɛ yɔrɔ la walasa ka ninakili. Ni sɔgɔlilan datugulen don kɛsu fitinin dɔ kɔnɔ, fiɲɛbɔlan bɛ se ka fiɲɛ sumalen dɔrɔn de lamaga o yɔrɔ fitinin kelen in lamini na. Nɛnɛ bɛ jigin hali ni fiɲɛbɔlan yɛrɛ bɛ baara kɛ hali bi.

Aw bɛ yɔrɔ caman to dondaw ni bɔyɔrɔw lamini na. Aw bɛ aw yɛrɛ tanga fɛnw bilali datugulanw ma, kabali sirilanw, buguri tangalanw, walima brackets minnu ka surun fiɲɛbɔlan sira la kojugu. U bɛ se ka kɛ i n’a fɔ farati tɛ u la, nka u bɛ se ka fiɲɛbɔli bali tigɛcogo lakikaw la.

O nafa ka bon kosɛbɛ baara janw na. Ni sɔgɔsɔgɔninjɛ bɛ boli lɛrɛ caman kɔnɔ, funteni min sirilen don, o bɛ bonya dɔɔni dɔɔni. So funteni bɛ wuli, birikiw bɛ degun caman sɔrɔ, wa motɛri bɛ se ka baara kɛ cogo sabatilen na. Fiɲɛbɔ dafalen bɛ cogo lakika di fiɲɛbɔlan ma k’a ka baara kɛ.

Bearing Life Management in a Air Cooled Spindle Motor

Beringw bɛ baara kɛ ni dususuma ye, nka u bɛ caman latigɛ. Air Cooled Spindle Motor kɔnɔ, u bɛ nɔ bila baarakɛcogo la, bolicogo tigitigi la, mankan na, ani tigɛ sabatili la. Ni u tora kɛnɛya la, baarakɛminɛn bɛ wuli ka ɲɛ. Ni u sɛgɛnna, hali sɔgɔli barikama bɛ daminɛ ka tigɛ jugu kɛ.

Zhong Hua Jiang fiɲɛ-nɛnɛ spindle motɛriw bɛ baara kɛ ni biriki jɔcogo ɲumanw ye walasa ka CNC masinw sabati. Modeli dɔw dabɔra bolicogo kɔlɔsili kama milimɛtɛrɛ 0,005 duguma. O tigitigi hakɛ bɛ mɛn dɔrɔn ni funteni, buguri, doni ani tulu bɛ to a kɔrɔ.

Fiɲɛ bɛ nɛnɛ spindle motɛri biriki minnu bɛ mɛn, olu bɛ mɛn waati joli kɔnɔ?

Muɲuli ɲɛnamaya bɛ bɔ baarakɛyɔrɔ la. Buguri tɛ min na cogo la min bɛ kɛ cogo la ani funteni bɔli cogo bɛnnen na, Zhong Hua Jiang bɛ baarakɛwaati 500–1000 jira birikiw fɔlɔw la. Butigi lakikaw la, o yɔrɔ in bɛ se ka dɔgɔya ni buguri donna sɔgɔli la walima ni nɛnɛ fanga dɔgɔyara.

Atelier fitinin min bɛ jiri tigɛ baara kunkurunninw kama, o bɛ se ka muɲuli si janya ye. Fɛn dilanni sira min bɛ MDF tigɛ tile bɛɛ, o bɛ se ka kɛ ko a mago bɛ sɛgɛsɛgɛliw la ka kɔn o ɲɛ. Jateden nafa ka bon, nka ka spindle lamɛn, o nafa ka bon ka tɛmɛ o kan.

Biriki sɛgɛn taamasiɲɛ fɔlɔw ye jumɛnw ye?

Tuma caman na, biriki sɛgɛn bɛ daminɛ ni mankan ye. A daminɛ na, a bɛ se ka kɛ mankan nɔgɔman ye. Kɔfɛ, a bɛ se ka kɛ sɔgɔli, yɛrɛyɛrɛ walima jiginni gɛlɛn ye. N’an ma an janto a la, a ka c’a la, tigɛ nɔ bɛ juguya.

Aw bɛ nin taamasiɲɛ ninnu kɔlɔsi don o don baara kɛtuma na:

• Mankan min tɛ bɛn, o bɛ bɔ mankan walima sɔgɔsɔgɔninjɛ. A bɛ se ka bonya ka taa a fɛ ni RPM ka bon. Mankan fana bɛ se ka Changé ni baarakɛminɛn magara fɛn dɔ la. A ka c’a la, o kɔrɔ ye ko biriki yɔrɔ tɛ nɔgɔya tuguni.

• A jɛlen don ko sɔgɔsɔgɔninjɛ yɛrɛyɛrɛ bɛ daminɛ tigɛtuma na. A bɛ se ka kɛ ko masin bɛ baara kɛ hali bi, nka a bɛ kɛ i n’a fɔ baarakɛminɛn in tɛ sabati kosɛbɛ. Aw bɛ se ka kumakan taamasiɲɛw ye jiri, akiriliki walima aliminiyɔmu kan. O bɛ se ka kɛ sababu ye ka birikiw lajɔ walima ka u kɔnɔna sɛgɛn.

• Baarakɛminɛnw bolicogo bɛ nɔgɔya ka kɔlɔsi. A bɛ se ka kɛ ko bitiki tɛ wuli cɛmancɛ sira saniyalen kan. Dadaw bɛ kɛ fɛn gɛlɛnw ye, wa dingɛw bɛ se ka kɛ i n’a fɔ u bonya ka bon dɔɔnin. Jatebɔ juguya fana bɛ se ka kɛ fɛn ye min tɛ bɛn ɲɔgɔn ma.

• Surface finish bɛ jigin kun jɛlen tɛ. Balo hakɛ, baarakɛminɛn ani fɛnw bɛ se ka Changé. O bɛɛ n’a ta, tigɛ laban bɛ i ko a ka jugu ka tɛmɛ o kan. Tuma caman na, biriki sɛgɛnnenw dogolen bɛ gɛlɛya kɔfɛ.

Biriki sɛgɛnni bɛ nɔ jumɛn bila masinw ka tiɲɛni na?

Bering min sɛgɛnnen don, o tɛ mankan dɔrɔn de kɛ. A bɛ fɛn caman Changé cogo min na shaft bɛ baarakɛminɛn minɛ teliya la. Ni jirisun in y’a daminɛ ka taa cɛmancɛ la, boli bɛ bonya. O kɔfɛ, tigɛbaga tɛ tugu sira bolodalen kɔ tugun ka saniya.

O bɛ butiki gɛlɛya nafamaw lase. Baarakɛminɛnw jiginni bɛ se ka burw to aliminiyɔmu kan, ka dakun gɛlɛnw to akiriliki kan, walima ka tigɛ fuw to MDF kan. Jatebɔ baara la, lɛtɛrɛ misɛnninw bɛ se ka bɔnɛ u ka kunnafoni nɔgɔlenw na. Batch production (batch production) la, file kelen bɛ se ka na ni nɔ wɛrɛw ye.

A jugumanba ye shaft deflection ye. O waati la, sɔgɔli bɛ se ka baarakɛminɛn tiɲɛ, ka baarakɛminɛn tiɲɛ, walima ka motɛri degun ka taa a fɛ. Ni Air Cooled Spindle Motor tora ka baara kɛ nin cogo in na, dilan musakaw bɛ se ka wuli joona.

Baarakɛlaw ka kan ka birikiw tulu ni u falencogo ɲɛnabɔ cogo di?

Kosɔn Zhong Hua Jiang fiɲɛ-nɛnɛ spindle ladonni, aw bɛ baara kɛ ni tulu kɛrɛnkɛrɛnnen ye min bɛ teliya kosɛbɛ biriki la waati min fɔra. gafe min bɛ ɲɛfɔli kɛ , o bɛ girisi falenni kofɔ baarakɛwaati 800 ɲɔgɔn na . Aw bɛ tulu min bɛ bɛn ɲɔgɔn ma, barisa a bɛ se ka kɛ ko tulumafɛn nɔgɔman tɛ se ka sɔgɔsɔgɔninjɛ teliyaba wulicogo ɲɛnabɔ ka ɲɛ.

Biriki ladoncogo nɔgɔman bɛ baara kɛ ka ɲɛ:

• Aw bɛ baarakɛwaati sɛbɛn spindle kelen-kelen bɛɛ la. Aw kana aw jigi da hakilijagabɔ dɔrɔn kan. Aw bɛ fɛn dilanni jiginni janw sɛbɛn, tigɛ baara gɛlɛnw, ani funteni ko minnu tɛ kɛ cogo la. O sɛbɛnw bɛ dɛmɛ don ka a latigɛ waati min na sɛgɛsɛgɛli walima baara ka kan ka kɛ.

• Aw bɛ masin jɔ ni a doncogo taamasiɲɛw jirala. Aw kana taa a fɛ ka tigɛ ka tɛmɛ sɔgɔli mankan walima yɛrɛyɛrɛ barikama fɛ. A bɛ se ka kɛ sababu ye ka jiribolo wuli, ka baarakɛminɛnw tiɲɛ, ani ka baarakɛminɛnw tiɲɛ. A ka c’a la, ka jɔ joona, o sɔngɔ ka dɔgɔ.

• Aw bɛ biriki sɛgɛnnenw falen joona. Biriniw dilancogo ka kan ka baara kɛ ni a ɲɛfɔcogo ɲuman ye ani a sigicogo ɲuman. Ni fɛnw falenni man ɲi, o bɛ se ka boli gɛlɛya kura lase. Ni sɔgɔsɔgɔninjɛ minnu tɔgɔ sɛbɛnnen don, u yɔrɔ fɔlɔw walima u yɔrɔ minnu bɛ bɛn ɲɔgɔn ma, olu ka fisa.

• Aw bɛ sistɛmu dafalen lajɛ a falen kɔfɛ. Aw bɛ fiɲɛbɔlan fiɲɛbɔcogo, VFD sigicogo, baarakɛminɛnw balansi, ani tigɛ doni sɛgɛsɛgɛ. Tuma caman na, birikiw bɛ tiɲɛ joona bawo gɛlɛya wɛrɛ bɛ yen hali bi.

 

Kuncɛli

Air Cooled Spindle Motɛri ladonni bɛ daminɛ ni fiɲɛ saniyalen ye.

Bugun bɔli, fiɲɛbɔlan saniya ani fiɲɛbɔ da wulilen bɛ funteni kunbɛn.

Biriki sɛgɛsɛgɛli tuma bɛɛ bɛ dɛmɛ ka mankan, bolicogo ani tigɛ filiw dɔgɔya.

VFD sigicogo minnu bɛ bɛn ɲɔgɔn ma ani tigɛ doni minnu bɛ kɔrɔsi, olu fana bɛ spindle ɲɛnamaya lakana.

Walasa ka fiɲɛ nɛnɛmanw sɔrɔ minnu bɛ se ka da u kan, Zhong Hua Jiang bɛ VFD inverterw di minnu bɛ bɛn ɲɔgɔn ma, ka dɛmɛ don ka kɛɲɛ ni mɔgɔw sago ye, ani ka feereli kɔfɛ ladonni bilasiralikan di.

 

Ɲininkaliw minnu bɛ kɛ Air Cooled Spindle Motor kan

J: Ne ka kan ka Air Cooled Spindle Motor saniya siɲɛ joli?

A: Aw bɛ buguri bɔ masin baaracogo kelen-kelen bɛɛ kɔfɛ. Aw bɛ fiɲɛbɔlan datugulan saniya kosɛbɛ ka kɛɲɛ ni buguri hakɛ ye.

J: Yala ne bɛ se ka fiɲɛ minɛlen kɛ walasa k’a saniya wa?

A: Ɔwɔ. Aw bɛ fiɲɛ jalen digilen kɛ fiɲɛbɔyɔrɔw la, fiɲɛbɔlanw kan ani kɛnɛma wuluwuluw kan. Aw kana buguri wajibiya ka don a kɔnɔ.

J: Mun na a bɛ funteni sɔrɔ tigɛtuma na?

A: A sababu minnu ka teli ka sɔrɔ, olu ye fiɲɛbɔ balili ye, fiɲɛbɔlan tiɲɛni, doni girinman, VFD sigicogo jugu, walima fiɲɛbɔcogo jugu.

J: Ne b’a dɔn cogo di ko fiɲɛbɔlan mago bɛ fɛn wɛrɛ la?

A: Aw ye aw janto a la ni mankan tɛ wuli, ni a bɛ wuli dɔɔni dɔɔni, ni fiɲɛ tɛ se ka bɔ, ni a bɛ kɛ ni nɛgɛw karilen don, walima ni mankan tɛ sabati.

J: Tuma jumɛn na birikiw ka kan ka wuli?

A: Aw bɛ u falen u sɔgɔli mankan, yɛrɛyɛrɛ, boli, jiginni gɛlɛn kɔfɛ, walima tigɛ tiɲɛni bɔnɛ kɔfɛ.