Yu de ya: Os » Prodakt dɛn . » Stepa Motor . » NEMA 57 Stepper Motor 3.48v High Torque 1.8° 2-Fez Hybrid Stepper fɔ CNC, 3D printa, rɔbɔtiks, ɔtomɛshɔn, DIY prɔjek dɛn

NEMA 57 stepper motor 3.48v ay tork 1.8° 2-faz haybrid stepper fɔ CNC, 3D printa, rɔbɔtiks, ɔtomɛshɔn, DIY prɔjek dɛn

Share to:

NEMA 57 stepper motor 3.48v ay tork 1.8° 2-faz haybrid stepper fɔ CNC, 3D printa, rɔbɔtiks, ɔtomɛshɔn, DIY prɔjek dɛn

Achieve prɛsis muvmɛnt kɔntrol wit di NEMA 57 3.48V stɛp mɔta, we dɛn mek fɔ ay pefɔmɛns insay wan big rɛnj ɔf ɔtomɛshɔn ɛn DIY aplikeshɔn dɛn.

Ɛgzampul:
23HS9440-26 we de sho.
Mak:
Zhong Hua Jiang we de na di wɔl.
Vɔltɛm: .
3,48V
Naw:
4A bin de.
Lɔng:
84mm na di

Di tin dɛn we de:

Kwantiti:



Aks fɔ aks kwɛstyɔn dɛn . Add to basket .

Di diskripshɔn fɔ di prɔdak .

01 Jɛnɛral spɛsifikɛshɔn .

23HS9440-26(1)-1.

Tin	Spesifi kshɔn dɛn .
No.of Faz dɛn .	2
Step Enjɛl .	1,8°±5%
Di Vɔltɛm we dɛn rayt .	3,48V
Di rayt we dɛn rayt naw	4.0A we de na di wɔl.
Fɔ avɔyd	0,87 ohm±10% na 20°C
Induktans .	3,1 mh±20% na 1kHz, 1VRMS
Holding torque na di .	oba 2.4 nm/min .
Detent torque na na na na na na na na na na na .	Di wan dɛn we de dɔŋ 7.0 N.CM/MAX
Rotor inertia na di .	530 g.cm²
Lid stayl .	AWG22 UL1007 we de sho.
Insuleshɔn Klas .	Klas B .
Dielectric strength .	500V ac 1 minit/minit
Insuleshɔn rɛsistɛns .	oba 100mΩ/min.
Alowable thrust load we yu kin yuz fɔ mek yu trɔs .	15N na
Alowable radial lod .	75n (shaft end/on di shaft end)

02 Ilɛktrik Spɛsifikeshɔn .

Model nɔ.

Step Enjɛl .

Motor lɔng .

Vɔltɛm fɔ di vɔltɛm .

Naw

Fɔ avɔyd

Induktans .

Holding torque na di .

Inertia na di .

Lid stayl .

(°)

(L)mm we de mek di wɔl.

V .

WAN

Ω fɔ di wan dɛn we de na di wɔl.

MH we de na di wɔl .

MN.M., ɛn ɔda pipul dɛn.

G.CM⊃2;

23HS944 we dɛn rayt.

0-26 na di .

1.8

3.48

4.0

0.87

3.1

2.4

530

AWG26 we de sho.

1061

Abov onli fɔ ripɔt prodak dɛm, prodak dɛm fɔ spɛshal riŋwe kin bi akɔdin to di kɔstɔma riŋwe.

Insuleshɔn lɛvɛl .

Insuleshɔn lɛvɛl .	Insuleshɔn vɔltɛm .	Insuleshɔn rɛsistɛns .
Klas B .	500V ac 1 minit	oba 100 mΩ .
Klas F .	500V ac 1 minit	oba 100 mΩ .

Insuleshɔn lɛvɛl:

Di insuleshɔn lɛvɛl fɔ ilɛktrik mɔta de tɔk bɔt di ɔt rɛsistɛns lɛvɛl fɔ di insuleshɔn matirial we dɛn yuz, we dɛn sheb to wan 、E 、B 、F ɛn H . alawable tɛmpracha rayz de tɔk bɔt di limit we di tɛmpracha fɔ di ilɛktrik mɔta de go ɔp we yu kɔmpia am wit di ambiɛnt tɛmpracha.

Tempracha klas fɔ insuleshɔn .	Wan lɛvul .	E Lɛvul .	B Lɛvɛl .	F Lɛvul .	H Lɛvul .
Maksimal tɛmpracha we dɛn kin alaw (°C) .	105	120	130	155	180
Di temperechur we de na di temperecha go ɔp (K) .	60	75	80	100	125
Pɔfɔmɛnshɔn rɛfrɛns tɛmpracha (°C) .	80	95	100	120	145

03 Dimenshon .

Diagram fɔ waya di si .

Eksaytin sikyud .

04 Teknɔlɔji kɔndishɔn dɛn .

Step Angle Akkurayt .	±5%
Di akkuracy fɔ rɛsistɛns .	±10%
Induktans akkuracy .	±20%
Tempracha we de go ɔp .	80°C Maks.
Di tɛmpracha we de na di ambiɛnt .	-20°C~+50 ° C.
Insuleshɔn rɛsistɛns .	100mΩ min 500V DC
Dielectric strength .	500V ac 1 minit
Alowable radial lod .	75N na
Alowable thrust load we yu kin yuz fɔ mek yu trɔs .	15N na

05 kɔmni prɔfayl .

'Zhong hua jiang' brand stori .

Aw wi bigin?

Huajiang bin foun in 2000,start in di prodakshɔn fɔ CNC engraving spindle moto,den ɛkspanda prodakshɔn to VFD(variable frikshɔn drayv) ɛn engraving mashin dɛn .

Fɔ ɛksplɔrɔ ɛn divɛlɔp mɔ makɛt,wi establish brand ' Zhong Hua Jiang' pan 2018.

Wetin mek wi proud ?

Wi don rejista patent fo wi siris of air cooling spindle motor. Di Patent No:200730184245.5.

Wi gɛt 20 ia manufakchurin ɛkspiriɛns na dis fild.

Wi dɔn de ɛkspɔt wi prɔdak dɛn to ɔlsay na di wɔl inklud di kɔmni we bɔku pipul dɛn sabi na Amɛrika ɛn Jamani.