NEMA 28 Stɛpa Mɔtɔ Ay Tork 1.8° 2-Fayz Haybrid Stɛpa fɔ CNC, 3D Printa, Rɔbɔtiks, Ɔtomɛshɔn, DIY Projɛkt dɛn

  01 Jɛnɛral Spɛsifikeshɔn  

Dis NEMA 28 ay tork 2 faz haybrid stɛpa motoka na fɔ kɔmpakt prɛsishɔn muvmɛnt kɔntrol sistɛm dɛn. I de gi 1.8° stɛp angle, 3.8V rayt vɔlɔt, 0.8A rayt kɔrɛnt, ɛn stebul holdin tɔk fɔ CNC mashin dɛn, ɔtomɛshɔn ikwipmɛnt, rɔbɔtiks, 3D printa dɛn, ɛn OEM muvmɛnt kɔntrol prɔjɛkt dɛn.

Tin	Spɛsifikeshɔn dɛn
No. fɔ di Faz dɛn	2
Step Angle	1,8° ±5% .
Vɔltɛm we dɛn dɔn rayt	3.8V
Rated Current we dɛn dɔn rayt	0.8A
Fɔ avɔyd	5.6Ω ±10% na 20°C
Induktans we dɛn kɔl	3.8mH ±20% na 1kHz, 1Vrms
Holding Torque we yu de ol	Abov 0.06Nm min.
Detent Tork we dɛn kin yuz	Di dɔŋ 0.4N.cm maks.
Rotor Inɛshya	9g.cm⊃2 na di;
Lid Stayl	AWG26 UL1061 we de na di wɔl
Insuleshɔn Klas	Klas B
Dielektrik Strɔng	500V AC, 1 minit
Insuleshɔn Resistɛns	Abov 100MΩ min.
Thrust Load we dɛn kin alaw	3N
Radial Lod we dɛn kin alaw	21N na shaft end

  02 Ilektrikal Spɛsifikeshɔn  

Model No.	Step Angle	Motor Lɛngth	Vɔltɛm	Naw	Fɔ avɔyd	Induktans we dɛn kɔl	Holding Torque we yu de ol	Inɛs we nɔ de wok	We
	°	L/mm	V	WAN	Ω na di Ω	mH	mN.m	g.cm⊃2 we de na di bɔdi;	g
11HS3406 we de na di wɔl	1.8	53	3.8	0.67	5.6	3.8	60	9	110

  03 Dimɛnshɔn  

  Dayagram fɔ Wayring  

  04 Teknɔlɔji Kɔndishɔn dɛn  

Step Angle Akkuracy we yu go ebul fɔ du	±5% na di .
Resistans Akkurayt we yu de du	±10% na di .
Induktans Akkurayt we pɔsin kin du	±20% na di .
Tɛmpratura Rise	80°C Maks.
Insuleshɔn Resistɛns	100MΩ Min. 500V DC we yu de yuz
Dielektrik Strɔng	500V AC 1 Minute
Radial Lod we dɛn kin alaw	21N
Thrust Load we dɛn kin alaw	3N

  05 Advantej dɛn fɔ di Prodak  

• 2 phase haybrid stepper moto fɔ prɛsishɔn muvmɛnt kɔntrol.

• 1.8° step angle sɔpɔt akchual pozishɔn ɛn smol ɔpreshɔn.

• Kompakt NEMA 28 freym saiz fɔ limited instɔleshɔn spɛs.

• 60mN.m holdin tork fɔ laytwɛt ɔtomɛshɔn ɛn CNC aplikeshɔn dɛn.

• Klas B insuleshɔn ɛn 500V AC dayelɛktrik trɛnk fɔ rili ɔpreshɔn.

• I fayn fɔ OEM step motor projɛkt, CNC muvmɛnt sistem, ɛn ɔtomɛshɔn ikwipmɛnt.

  06 Aplikeshɔn dɛn  

• CNC router ɛn CNC engraving mashin aks kɔntrol

• 3D printa ɛn smɔl ɔtomɛshɔn ikwipmɛnt

• Robotiks ɛn prɛsishɔn pozishɔn sistɛm dɛn

• Pak mashin ɛn ikwipmɛnt fɔ lɛbul

• Medikal ikwipmɛnt ɛn laboratori inschrumɛnt dɛn

• Kastom OEM moshɔn kɔntrol sistem dɛn

  07 Prodakt Sɛtifiket  

  FAQ we dɛn kin aks  

Wetin na di step angle fɔ dis NEMA 28 step motor?

Di step angle na 1.8° ±5%, we de sɔpɔt prɛsis pozishɔn fɔ CNC, ɔtomɛshɔn, rɔbɔtiks, ɛn muvmɛnt kɔntrol aplikeshɔn dɛn.

Wetin na di rayt vɔlɔt ɛn kɔrɛnt?

Di rayt vɔlɔt na 3.8V ɛn di rayt kɔrɛnt na 0.8A.

Wetin na di holdin tork fɔ dis motoka?

Di holdin tork na 60mN.m, we fit fɔ kɔmpakt prɛsishɔn muvmɛnt sistɛm dɛn we nid stebul tɔk autput.

Us aplikeshɔn dɛn dis 2 faz haybrid stɛpa motoka fit fɔ?

I fayn fɔ CNC mashin dɛn, ɔtomɛshɔn ikwipmɛnt dɛn, rɔbɔtiks, 3D printa dɛn, pak mashin dɛn, lɛbɔretri inschrumɛnt dɛn, ɛn OEM muvmɛnt kɔntrol sistem dɛn.

Dis pej gɛt di waya dayagram ɛn di dimɛnshɔn drɔin?

Yɛs. Di prodak pej gɛt mɛkanikal dimɛnshɔn drɔin ɛn wan waya dayagram fɔ ɛp injinia dɛn fɔ kɔnfɔm instɔleshɔn spɛs ɛn waya rikwaymɛnt.