VFD 110V 1.5KW 2hp Canjin Mitar Motar CNC VFD Motar Inverter don CNC Spindle Motor

Zhong Hua Jiang 110V 1.5KW 2HP CNC VFD Inverter don Motar Spindle

Wannan Zhong Hua Jiang 110V 1.5KW CNC VFD inverter an ƙera shi don injinan igiya na CNC mai kashi uku na 110V asynchronous. Yana jujjuya shigarwar 110V guda ɗaya zuwa fitarwa na kashi uku na 110V, yana mai da shi dacewa da masu amfani da hanyoyin CNC, injin sassaƙaƙƙiya, injunan aikin itace, da sauran aikace-aikacen sarrafa saurin igiya.

VFD tana goyan bayan mitar fitarwa na 0-400Hz, sadarwar MODBUS485, sarrafawar Mach3, haɗin haɗin haɗin birki mai ciki, kulawar vector DSP, aiki mai sauri da yawa, da kariyar kuskure da yawa. An riga an tsara shi tare da sigogi na asali don taimakawa masu amfani su kammala shigarwa da ƙaddamarwa da inganci.

Mabuɗin Siffofin

• 1.5KW / 2HP CNC VFD inverter don masu motsi na 110V mai hawa uku.

• Shigar da 110V-lokaci ɗaya da fitarwa na 110V mai mataki uku.

• Mitar fitarwa 0–400Hz don sarrafa saurin igiya na CNC.

• Siffofin asali waɗanda aka riga aka tsara don sauƙin saiti.

• MODBUS485 sadarwa da goyon bayan sarrafa Mach3.

• Ginin naúrar birki don haɗin kai tsaye resistor.

• DSP vector iko don babban juyi a ƙananan gudu.

• Kariyar kuskure da yawa don aikin CNC mafi aminci.

• Babban fanka mai sanyaya da tashar watsawar zafi mai zaman kanta.

• Ya dace da masu amfani da hanyar sadarwa na CNC, injinan sassaƙawa, da tsarin motsi na sandal.

Ma'aunin Fasaha

• Samfuri: CNC VFD inverter / m mitar drive

• Wutar lantarki: 1.5KW/2HP

• Input ƙarfin lantarki: Single-phase 110V

• Wutar lantarki mai fitarwa: Mataki na uku 110V

• Mitar shigarwa: 50/60Hz

• Mitar fitarwa: 0-400Hz

• Motar da ta dace: Mataki na uku 110V asynchronous CNC spindle motor kawai

• Girma: 90 × 118 × 150mm / 3.5 × 4.65 × 5.9 inci

• Nauyin: 1.3kg / 2.87lbs

Bayanin Samfura

CNC VFD wanda aka riga aka tsara don Saita Sauƙi

An riga an riga an tsara VFD tare da sigogi na asali na spindle, don haka masu amfani ba sa buƙatar kammala hadadden tsari na farko kafin aiki. Matsakaicin mitar tsoho shine 400Hz, kuma ana iya daidaita saurin igiya ta maɓallin mitar ko tsarin sarrafa waje.

An ƙera wannan inverter tare da shigarwar lokaci ɗaya da fitarwa na matakai uku, yana mai da shi zaɓi mai amfani don taron bita ta amfani da wutar lantarki na 110V yayin aiki da injin igiya na CNC mai hawa uku.

Haɗin Resistor Brake da Sadarwar MODBUS485

Wannan CNC VFD yana goyan bayan sadarwar Mach3 da MODBUS485. Ginin naúrar birki a ciki yana ba mai juyawa damar haɗa kai tsaye tare da mai jujjuya birki, yana taimakawa haɓaka aikin ragewa da kwanciyar hankali sarrafa sandal a aikace-aikacen injinan CNC.

Babban Magoya Mai sanyaya ƙarar iska

Fannonin sanyaya yana samar da sama da 20% mafi girman girman iska fiye da magoya bayan talakawa. Tashar iska mai zaman kanta ta watsar da zafi a cikin VFD tana taimakawa kare allon kewayawa daga ƙura da hazo na ruwa, yana goyan bayan tsayayyen aiki a cikin tarurrukan CNC.

Kariyar Laifi da yawa

Mai jujjuyawar ya haɗa da ginanniyar saitin PID, bin diddigin sauri, fitarwa mai aiki da yawa, kariyar kuskure da yawa, martanin matsayi da yawa, sarrafa juzu'i, da saitin analog. Waɗannan ayyuka suna taimakawa kare injin VFD da sandal yayin aikin kwatancen CNC da zane-zane.

High Torque a Low Speed

Ikon sarrafa vector na DSP yana ba da injin igiya don cimma babban juzu'i yayin jujjuyawar ƙananan sauri. Matattu diyya na yanki da diyya ta atomatik ta atomatik na iya samar da ƙarancin mitar 0.25Hz da 180% babban ƙarfin juzu'i don buƙatar aikace-aikacen sandal na CNC.

Daidaitacce 16kHz Mitar Mai ɗauka

Mitar mai ɗaukar kaya tana daidaitawa har zuwa 16kHz. Fasahar sarrafa wutar lantarki ta atomatik tana taimakawa tabbatar da ƙarfin ɗaukar nauyi na VFD da ingantaccen aikin injin sandal yayin aikin injin CNC.

Tsarin Waya na VFD

Tsarin Waya Tsakanin VFD da Hukumar Kulawa

Wannan VFD yana aiki ne kawai ga injinan motsi na CNC na zamani guda uku na 110V asynchronous.

Haɗa injin sandal ɗin zuwa tashar U / V / W akan VFD.

Me Ya Sa Wannan CNC VFD Ya Keɓanta?

• An tsara shi don aikace-aikacen motsa jiki na 110V 1.5KW / 2HP CNC.

• Siffofin asali waɗanda aka riga aka tsara suna rage lokacin saiti.

• Haɗin resistor na birki yana goyan bayan mafi kyawun sarrafa ragewa.

• DSP vector iko yana ba da babban juzu'i a ƙananan gudu.

• Kariyar kuskure da yawa yana inganta amincin aiki.

• Tashar sanyaya mai zaman kanta yana taimakawa rage ƙura da tasirin danshi.

• Zhong Hua Jiang yana da gogewar masana'antu na dogon lokaci a cikin injinan katako na CNC, VFDs, da injunan sassaƙa.

Tushen Samfura da Masana'antu

An kafa Huajiang a shekara ta 2000, wanda ya fara da samar da injinan zanen CNC na zane-zane daga baya kuma ya fadada zuwa injin mitar mitar VFD da injuna. An kafa alamar Zhong Hua Jiang a cikin 2018 don tallafawa ci gaban kasuwannin duniya gabaɗaya.

Kamfanin yana da ƙwarewar masana'antu a cikin injinan sandar CNC da samfuran VFD, fitarwa zuwa kasuwannin duniya, kuma yana ba da tallafi ga masu amfani da injin na'ura mai ba da hanya tsakanin hanyoyin sadarwa na CNC, masu rarrabawa, da masu siyar da B2B.

FAQ

Wanne injin leda ne wannan 1.5KW VFD ya dace da shi?

Wannan VFD ya dace da masu hawa uku na 110V asynchronous CNC spindle Motors. Bai kamata a yi amfani da shi tare da injina waɗanda basu dace da ƙarfin lantarki, lokaci, da buƙatun wuta ba.

Shin wannan VFD na iya juyar da 110V-lokaci ɗaya zuwa 110V mai kashi uku?

Ee. VFD tana amfani da shigarwar 110V na lokaci-ɗaya kuma tana ba da fitarwa na 110V na kashi uku don injinan sandar CNC masu jituwa.

Shin an riga an shirya wannan CNC VFD?

Ee. An riga an tsara VFD tare da sigogi na asali. Masu amfani za su iya daidaita mitar bisa ga madaidaicin madaurin RPM da ake buƙata, tare da matsakaicin matsakaicin mitar da aka saita a 400Hz.

Shin wannan VFD yana goyan bayan Mach3 da MODBUS485?

Ee. Wannan VFD yana goyan bayan sarrafawar Mach3 da sadarwa MODBUS485, yana sa ya dace da tsarin kula da na'ura mai ba da hanya tsakanin hanyoyin sadarwa na CNC.

Zan iya haɗa resistor birki zuwa wannan VFD?

Ee. VFD ya haɗa da ginanniyar naúrar birki kuma ana iya haɗa shi kai tsaye zuwa mai jujjuya birki don ingantacciyar sarrafa ragewa.

Wadanne aikace-aikacen CNC ake amfani da wannan VFD?

Yawanci ana amfani da shi don masu amfani da hanyoyin CNC, injinan zanen CNC, injinan itace, da sauran kayan aikin da ke buƙatar sarrafa saurin sauri don injin igiya mai hawa uku na 110V mai jituwa.