VFD 110V 1.5KW 2hp Nsakrae Frequency Drive CNC VFD Motor Drive Inverter Nsakrae ma CNC Spindle Motor

Zhong Hua Jiang 110V 1.5KW 2HP CNC VFD Inverter ma Spindle Motor

Saa Zhong Hua Jiang 110V 1.5KW CNC VFD inverter yi yɛ nea wɔayɛ ama abiɛsa-fase 110V asynchronous CNC spindle motors. Ɛdane 110V a ɛwɔ phase baako mu no kɔ 110V a ɛwɔ phase mmiɛnsa mu, na ɛma ɛfata ma CNC routers, engraving mfiri, nnua adwuma mfiri, ne spindle ahoɔhare sohwɛ dwumadie foforɔ.

VFD no boa 0–400Hz output frequency, MODBUS485 nkitahodi, Mach3 control, built-in breki unit nkitahodi, DSP vector control, multi-speed adwumayɛ, ne mfomso pii ahobammɔ. Wɔadi kan ayɛ nhyehyɛe ne mfitiase spindle parameters de aboa wɔn a wɔde di dwuma no ma wɔawie instɔlehyɛn ne commissioning yiye.

Nneɛma Titiriw a Ɛwɔ Hɔ

• 1.5KW / 2HP CNC VFD inverter ma abiɛsa-fase 110V spindle motors.

• Single-phase 110V input ne abiɛsa-fase 110V output.

• 0–400Hz output frequency ma CNC spindle ahoɔhare sohwɛ.

• Pre-programmed mfitiase parameters ma ɛyɛ mmerɛw sɛ wobɛhyehyɛ.

• MODBUS485 nkitahodi ne Mach3 control mmoa.

• Wɔasisi breki unit ma tẽẽ breki resistor nkitahodi.

• DSP vector control ma torque a ɛkorɔn wɔ ahoɔhare a ɛba fam.

• Mfomso ahobammɔ pii ma CNC adwumayɛ a ahobammɔ wom.

• Fan kɛse a ɛma onwini ne ɔhyew a ɛde ne ho no kwan.

• Ɛfata ma CNC routers, engraving mfiri, ne spindle motor nhyehyɛe.

Mfiridwuma mu Nneɛma a Wɔde Yɛ Nneɛma

• Aguade: CNC VFD inverter / nsakrae frequency drive

• Tumi: 1.5KW / 2HP na ɛyɛ adwuma

• Input ahoɔden: Single-fase 110V

• Output voltage: Abiɛsa-fase 110V

• Nsɛm a wɔde hyɛ mu: 50/60Hz

• Nneɛma a ɛba mpɛn dodow: 0–400Hz

• Motor a ɛfata: Mmiɛnsa-fase 110V asynchronous CNC spindle motor nkutoo

• Ne kɛse: 90 × 118 × 150mm / 3.5 × 4.65 × 5.9 nsateakwaa

• Ne mu duru: 1.3kg / 2.87lbs

Aguade Ho Nkyerɛkyerɛmu

Pre-Programmed CNC VFD ma ɛyɛ mmerɛw sɛ wobɛhyehyɛ

Wɔadi kan ayɛ VFD no ho nhyehyɛe ne mfitiase spindle parameters, enti enhia sɛ wɔn a wɔde di dwuma no wie mfitiase nhyehyɛe a ɛyɛ den ansa na wɔayɛ adwuma. Default maximum frequency yɛ 400Hz, na spindle ahoɔhare betumi ayɛ nsakrae denam frequency button anaa abɔnten control nhyehyɛe.

Wɔayɛ saa inverter yi a ɛwɔ phase baako input ne three-phase output, na ɛma ɛyɛ paw a mfaso wɔ so ma adwumayɛbea ahorow a wɔde 110V tumi a wɔde ma bere a wɔde phase abiɛsa CNC spindle motors di dwuma no.

Breki Resistor Nkitahodi ne MODBUS485 Nkitahodi

Saa CNC VFD yi boa Mach3 ne MODBUS485 nkitahodi. Breki a wɔde ahyɛ mu no ma inverter no ne breki resistor di nkitaho tẽẽ, na ɛboa ma deceleration adwumayɛ ne spindle control stability tu mpɔn wɔ CNC machining applications mu.

Mframa Kɛse a Ɛma Nwini Fan

Fan a ɛma onwini no ma mframa dodow a ɛkɔ soro bɛboro 20% sen fan a ɛyɛ mpapahwekwa. Mframa a ɛma ɔhyew a ɛde ne ho a ɛwɔ VFD no mu boa ma wɔbɔ circuit board no ho ban fi mfutuma ne nsu a ɛyɛ nwini ho, na ɛboa adwumayɛ a ɛyɛ den wɔ CNC adwumayɛbea ahorow mu.

Mfomso Ahobammɔ Pii

Inverter no bi ne PID nhyehyɛe a wɔasisi, ahoɔhare akyi di, multi-function relay output, pii mfomso ahobammɔ, pii tebea feedback, torque control, ne analog nhyehyɛe. Saa dwumadie yi boa ma wɔbɔ VFD ne spindle motor ho ban wɔ CNC routing ne engraving adwumayɛ mu.

Torque a Ɛkorɔn wɔ Ahoɔhare a Ɛba Fam

DSP vector control ma spindle motor no tumi nya torque a ɛkorɔn bere a ɛredannan ntɛmntɛm a ɛba fam no. Dead zone akatua ne automatic torque nsonsonoe akatua betumi ama low-frequency 0.25Hz ne 180% soro torque output ma ahwehwɛde CNC spindle applications.

16kHz Carrier Frequency a wotumi sesa

Carrier frequency no yɛ nsakraeɛ kɔsi 16kHz. Automatic voltage regulation mfiridwuma boa ma wɔhwɛ hu sɛ VFD adesoa tumi ne stable spindle motor adwumayɛ bere CNC machining.

Wiring Mfonini a ɛkyerɛ VFD

Wiring Diagram Ntam VFD ne Control Board

Saa VFD yi yɛ adwuma wɔ abiɛsa-fase 110V asynchronous CNC spindle motors nkutoo.

Fa spindle motor no bata U / V / W terminals a ɛwɔ VFD no so no ho.

Dɛn na Ɛma CNC VFD Yi Yɛ Soro?

• Wɔayɛ ama 110V 1.5KW / 2HP CNC spindle motor dwumadie.

• Mfitiase parameters a wɔadi kan ayɛ ho nhyehyɛe no tew bere a wɔde hyehyɛ no so.

• Breki resistor nkitahodi boa deceleration control a eye.

• DSP vector control ma torque a ɛkorɔn wɔ ahoɔhare a ɛba fam mu.

• Mfomso ahorow pii ahobammɔ ma adwumayɛ mu ahobammɔ tu mpɔn.

• Independent cooling channel boa ma mfutuma ne nsuo a ɛwɔ mu no so tew.

• Zhong Hua Jiang wɔ bere tenten mu osuahu wɔ CNC spindle motors, VFDs, ne engraving mfiri mu.

Brand ne Nneɛma a Wɔyɛ no Ho Nsɛm

Wɔde Huajiang sii hɔ wɔ afe 2000 mu, wofii ase yɛɛ CNC engraving spindle motors na akyiri yi wɔtrɛw mu kɔɔ VFD variable frequency drives ne engraving mfiri mu. Wɔde Zhong Hua Jiang ahyɛnsodeɛ no sii hɔ wɔ afe 2018 mu sɛ ɛbɛboa amanaman ntam gua so nkɔsoɔ a ɛtrɛ.

Adwumakuw no wɔ osuahu wɔ adwumayɛ mu wɔ CNC spindle motors ne VFD nneɛma mu, wɔde kɔ wiase nyinaa gua so, na ɛde mmoa ma wɔn a wɔde CNC router mfiri di dwuma, wɔn a wɔkyekyɛ, ne wɔn a wɔtɔ B2B.

FAQ

Spindle motor bɛn na saa 1.5KW VFD yi ne no hyia?

Saa VFD yi fata ma abiɛsa-fase 110V asynchronous CNC spindle motors nkutoo. Ɛnsɛ sɛ wɔde di dwuma wɔ motor ahorow a ɛne voltage, phase, ne power a wɔhwehwɛ no nhyia ho.

So VFD yi betumi adan 110V a ɛwɔ phase biako no ayɛ no 110V a ɛwɔ phase abiɛsa?

Aane. VFD no de single-phase 110V input di dwuma na ɛma abiɛsa-phase 110V output ma CNC spindle motors a ɛne no hyia.

So wɔadi kan ayɛ CNC VFD yi ho nhyehyɛe?

Aane. Wɔadi kan ayɛ VFD no ho nhyehyɛe a wɔde mfitiase parameters ahyɛ mu. Wɔn a wɔde di dwuma no betumi asiesie frequency no sɛnea spindle RPM a wɔhwehwɛ no te, a default maximum frequency no ahyɛ 400Hz.

So saa VFD yi boa Mach3 ne MODBUS485?

Aane. Saa VFD yi boa Mach3 control ne MODBUS485 nkitahodi, na ɛma ɛfata ma CNC router control nhyehyɛe.

So metumi de breki resistor abɔ VFD yi ho?

Aane. VFD no wɔ breki a wɔasisi mu na wobetumi de abɔ breki resistor a ɛne no hyia tẽẽ ama deceleration control atu mpɔn.

CNC dwumadie bɛn na wɔde saa VFD yi di dwuma?

Wɔtaa de di dwuma ma CNC routers, CNC engraving mfiri, nnua adwuma mfiri, ne nnwinnade afoforo a ɛhwehwɛ sɛ wɔhwɛ ahoɔhare a ɛsakra ma 110V three-phase spindle motor a ɛne no hyia.