NEMA 28 Stepper Motor 6.2V High Torque 1.8° 2-Phase Hybrid Stepper ka ɲɛsin CNC, 3D Imprimante, Robotiki, Otomatiki, DIY Porozɛw ma

  01 Ɲɛfɔli camanba  

Nin NEMA 28 high torque 2 phase hybrid stepper motor in dabɔra ka ɲɛsin lamagacogo ɲuman kɔlɔsili baarakɛcogo ma min bɛ kɛ ni hakɛ fitinin ye, girinya sabatilen, ani jɔyɔrɔ min bɛ se ka da a kan. A bɛnnen don CNC minɛnw ma, otomatiki sitɛmuw, robow, pakew dilanni masinw, furakɛli minɛnw, ani lamaga kɔlɔsili porozɛw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Minɛn	Kɛrɛnkɛrɛnnenya la
Fasaw hakɛ	2
Taabolo Angle	1,8° ±5% ye .
Voltage Nominal (Voltage Nominal) ye	6,2V ye
Rated Current (Kɔrɔlen).	0,67A ye
Firifirili	9,2Ω ±10% ni 20°C ye
Inductance (Inductance) ye	8,9mH ±20% ni 1kHz, 1Vrms
Torque minɛcogo	Sanfɛ 0,12Nm min.
Torque min bɛ detent (Detent Torque) la	Dugukolo kan 0,8N.cm max.
Rotor Inertie (Rotor ka inertie) ye	18g.cm⊃2 ye;
Plomb Style (Plomb Style) ye	AWG26 UL1061 ye
Insulasi Kalanso	Kalanso B. Kalanso B
Dielektriki fanga	500V AC, miniti 1
Insulasi Resistance (Aw ka kɛlɛli).	Sanfɛ 100MΩ min.
Allowable Thrust Load ( doni min bɛ se ka wuli	3N
Load radial min bɛ se ka kɛ	21N kan shaft laban na

  02 Kuranko ɲɛfɔli  

Modeli No.	Taabolo Angle	Motɛri Janya	Voltage (voltage) bɛ sɔrɔ	Sisan	Firifirili	Inductance (Inductance) ye	Torque minɛcogo	Inertie (Inertie) ye	Girinya
	°	L/mm	V	KELEN	Ω (Ω) ye	mH	mN.m	g.cm⊃2 ye;	g
11HS3406 ye	1.8	70	6.2	0.67	9.2	8.9	120	18	190

  03 Dimension (dakun)  

  Wiring Diagramme (Jaa min bɛ wele ko Wiring Diagram).  

  04 Fɛnɲɛnɛmako cogoyaw  

Taabolo Angle Tiɲɛni	±5% ye .
Resistance Accuracy (Kɛlɛcɛw ka tiɲɛni).	±10% ye .
Inductance ka tiɲɛni	±20% ye .
Funteni jiginni	80°C Max.
Insulasi Resistance (Aw ka kɛlɛli).	100MΩ Min ye. 500V DC ye
Dielektriki fanga	500V AC 1 Miniti
Load radial min bɛ se ka kɛ	21N
Allowable Thrust Load ( doni min bɛ se ka wuli	3N

  05 Nafa minnu bɛ sɔrɔ fɛn dilannenw na  

• 2 phase hybride stepper motor ka ɲɛsin lamagacogo tigitigi ma.

• 1,8° senna-yɔrɔ min bɛ kɛ walasa ka jɔyɔrɔ sabati ani ka baara kɛ ka ɲɛ.

• NEMA 28 karamɔgɔ hakɛ fitinin min bɛ kɛ minɛnw ye minnu sigiyɔrɔ dan ye.

• 120mN.m minɛ torque ka ɲɛsin otomatiki misɛnninw ni CNC baarakɛcogo ma.

• B kalasi insulasi ani 500V AC dielektriki fanga walasa ka baara kɛ ni dannaya ye.

• A bɛnnen don OEM stepper motor porozew ma, CNC lamagacogo, ani otomatiki minɛnw.

  06 Baarakɛcogo  

• CNC routeur ani CNC graving machine axis control

• 3D imprimante ani otomatiki minɛn fitininw

• Robotiki ni jɔyɔrɔfacogo tigitigiw

• Pakew dilanni masinw ani taamasiyɛnw dilanni minɛnw

• Furakɛminɛnw ni laboratuwari minɛnw

• OEM lamaga-lamagali-sitɛmu minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

  07 Fɛn dilannenw ka seereyaw  

  Ɲininkaliw  

Nin NEMA 28 senna-tɛgɛrɛ-motɛri in senna-yɔrɔ ye mun ye?

Senna-tɛgɛrɛ-yɔrɔ ye 1,8° ±5% ye, o bɛ jɔyɔrɔ tigitigi dɛmɛ CNC, otomatiki, robotiki, ani lamaga-kɔlɔsili baarakɛcogo la.

Voltage ni current hakɛ ye mun ye?

Voltage hakɛ ye 6,2V ye ani current hakɛ ye 0,67A ye.

Nin motɛri in minɛcogo girinya ye mun ye?

A minɛcogo girinya ye 120mN.m ye, a bɛnnen don lamaga-lamagali kɛcogo jɛlenw ma minnu bɛ girinya bɔli sabatilen wajibiya.

Nin 2 phase hybride stepper motor in bɛnnen don baara jumɛnw ma?

A bɛnnen don CNC masinw ma, otomatiki minɛnw, robow, 3D sɛbɛnnikɛlanw, pakew dilanni masinw, laboratuwari minɛnw, ani OEM lamaga-lamagali-minɛnw.

Yala nin ɲɛ in kɔnɔ, wiring diagramme ani dimension ja bɛ sɔrɔ wa?

Awɔ. Fɛn dilannenw ɲɛ in kɔnɔ, masinw hakɛ jaw bɛ yen ani wiring diagramme walasa ka ɛntɛrinɛti injiniyɛriw dɛmɛ ka installation yɔrɔ ni wiring wajibiyalenw dafa.