NEMA 28 Stepper Motor 6.2V High Torque 1.8° 2-Phase Hybrid Stepper bakeng sa CNC, 3D Printer, Robotics, Automation, DIY Projects

  01 Tlhaloso e Akaretsang  

Enjene ena ea NEMA 28 e phahameng ea torque 2 phase hybrid stepper e etselitsoe lits'ebetso tsa taolo e nepahetseng tse hlokang boholo ba komporo, torque e tsitsitseng, le boemo bo tšepahalang. E loketse lisebelisoa tsa CNC, litsamaiso tsa boiketsetso, liroboto, mechini ea ho paka, lisebelisoa tsa bongaka, le merero ea taolo ea motsamao oa moetlo.

Ntho	Litlhaloso
No. ea Mekhahlelo	2
Mohato Angle	1.8° ±5%
Rated Voltage	6.2V
E lekantsoe Hona Joale	0.67A
Khanyetso	9.2Ω ±10% ho 20°C
Inductance	8.9mH ±20% ho 1kHz, 1Vrms
Ho tšoara Torque	Ka holimo ho 0.12Nm min.
Torque ea Detent	Ka tlase ho 0.8N.cm max.
Rotor Inertia	18g.cm²
Mokhoa oa ho etella pele	AWG26 UL1061
Sehlopha sa Insulation	Sehlopha sa B
Matla a Dielectric	500V AC, motsotso o le mong
Khanyetso ea Insulation	Ka holimo ho 100MΩ min.
Dumelletswe Moroalo	3N
E lumelletsoeng Mojaro oa Radial	21N qetellong ea shaft

  02 Tlhaloso ea Motlakase  

Mohlala No.	Mohato Angle	Bolelele ba Motor	Palo ea li-volts	Hona joale	Khanyetso	Inductance	Ho tšoara Torque	Inertia	Boima ba 'mele
	°	L/mm	V	A	Ω	mH	mN.m	g.cm²	g
11HS3406	1.8	70	6.2	0.67	9.2	8.9	120	18	190

  03 Boemo  

  Setšoantšo sa Wiring  

  04 Maemo a Theknoloji  

Mohato Angle Ho Nepaha	±5%
Ho Nepaha ha Khanyetso	±10%
Ho nepahala ha Inductance	±20%
Mocheso Oa Phahamisa	80°C Max.
Khanyetso ea Insulation	100MΩ Min. 500V DC
Matla a Dielectric	500V AC Motsotso o le mong
E lumelletsoeng Mojaro oa Radial	21N
Dumelletswe Moroalo	3N

  05 Melemo ea Sehlahisoa  

• 2 phase hybrid stepper motor bakeng sa taolo e nepahetseng ea motsamao.

• 1.8 ° mohato oa mohato bakeng sa boemo bo tsitsitseng le ts'ebetso e bonolo.

• Compact NEMA 28 ea boholo ba foreimi bakeng sa lisebelisoa tse nang le sebaka se lekanyelitsoeng sa ho kenya.

• 120mN.m e ts'oereng torque bakeng sa li-automation tse nyane le lits'ebetso tsa CNC.

• Insulation ea Sehlopha sa B le matla a dielectric a 500V AC bakeng sa ts'ebetso e tšepahalang.

• E loketse merero ea likoloi tsa OEM stepper, litsamaiso tsa motsamao oa CNC, le lisebelisoa tsa othomathike.

  06 Likopo  

• CNC router le CNC fatling mochine axis taolo

• Mohatisi oa 3D le lisebelisoa tse nyane tsa othomathike

• Liroboto le mekhoa e nepahetseng ea ho beha maemo

• Mechine ea ho paka le lisebelisoa tsa ho ngola

• Lisebelisoa tsa bongaka le lisebelisoa tsa laboratori

• Sistimi ea taolo ea motsamao oa OEM e tloaelehileng

  07 Setifikeiti sa Sehlahisoa  

  LBH  

Karolo ea mohato oa koloi ee ea NEMA 28 stepper ke efe?

Karolo ea mohato ke 1.8 ° ± 5%, e ts'ehetsang boemo bo nepahetseng bakeng sa CNC, automation, robotics, le lits'ebetso tsa taolo ea motsamao.

Voltage e lekantsoeng le ea hona joale ke eng?

Matla a lekantsoeng ke 6.2V 'me hona joale ke 0.67A.

Torque ea enjene ee ke eng?

Torque e ts'oereng ke 120mN.m, e loketseng lits'ebetso tsa motsamao tse nepahetseng tse hlokang tlhahiso e tsitsitseng ea torque.

Enjene ee ea 2 phase hybrid stepper e loketse lisebelisoa life?

E loketse mechini ea CNC, lisebelisoa tsa othomathike, liroboto, bahatisi ba 3D, mechini ea ho paka, lisebelisoa tsa laboratori, le sistimi ea taolo ea motsamao oa OEM.

Na leqephe lee le na le setšoantšo sa lithapo le setšoantšo sa boholo?

Ee. Leqephe la sehlahiswa le na le metako ya metjhini le methalo ya methapo ho thusa baenjiniere ho netefatsa sebaka sa ho kenya le ditlhoko tsa mehala.