CNC Router Vs CNC Mill: Danfara minnu bɛ u jɔcogo, teliya, fɛnw ani musakaw la

Ni i ka CNC 'upgrade' bɛ kɛ sababu ye ka baarakɛminɛnw tiɲɛ ani ka fɛnw tiɲɛ do? A ka c’a la, ko lakika ye masin matchup ye, a tɛ baarakɛla ye.

U fila bɛɛ ye CNC masinw ye, o bɛɛ n’a ta, u dilannen don tigɛcogo danfaralenw kama. O kɔrɔ ye ko structure rigidity, spindle speed/torque, ani material fit.

Nin post in kɔnɔ, aw bɛna jɛlen sɔrɔ CNC Router vs CNC Mill ɲɛfɔli . I bɛna a dɔn min bɛ bɛn sɛbɛn belebelew baara nɔgɔlen ma ani jumɛn bɛ nɛgɛ gɛlɛnw yɔrɔw dɛmɛ minnu bɛ kɛ ni fɛn tigitigiw ye.

A laban na, i bɛna sugandili kɛcogo dɔn i ka minɛnw fɛ, i ka wotoro teliya magow fɛ, ani i ka tigi ka musaka bɛɛ lajɛlen fɛ.

 

CNC Router vs CNC Mill — Danfara minnu bɛ u jɔcogo la (Mun na masin bɛ i ko a tɛ kelen ye)

Ni i ye sanni kɛ tigɛlan kura ye, i bɛ fɛn fɔlɔ min sɔrɔ, o ye farikolo ta ye. A bɛ iko baarakɛminɛn denbaya fila minnu tɛ kelen ye. O bɛ Kɛ k'a sababu Kɛ CNC Router vs CNC Mill  bɛ jago kɛ ni rigidity ye teliya kama cogoya wɛrɛw la. Masina kelen b’a fɛ ka taa teliya la baara belebeleba fla kan. Tɔɔ kelen b’a fɛ ka tigɛ fanga gɛlɛnw kɛlɛ nɛgɛ la.

CNC Router jɔcogo: Gantry-Style ani a jɔcogo nɔgɔman

fanba CNC routeur setup bɛ baara kɛ ni gantry structural design ye. Miiri k’a filɛ nin cogo la: baarakɛyɔrɔ jɔlen dɔ bɛ to yɔrɔ kelen na, k’a sɔrɔ kuruwa gantry min bɛ lamaga, o bɛ tigɛ kunkolo ta. O kɔ fɛ, spindle kun bɛ taama ka tɛmɛ X/Y/Z kan, o la a bɛ 'skate' material yɔrɔ kan.

O nɔ nafamaw bɛ jira joona butiki kɔnɔ.

• Tuma caman na, u bɛ lamaga teliya ni masin girinya dɔgɔyali bila jɔyɔrɔ fɔlɔ la.

• U laɲini ye teliya ye fɛn tigɛcogo nɔgɔlen na, u tɛ tigɛ fanga kɛlɛli maksimali ye.

• Ni i ka baara ye sɛbɛnfura ye, u b’a ye ko u bɛ u yɛrɛ la ani u bɛ baara kɛ ka ɲɛ.

A ka c’a la, karamɔgɔya sugandili bɛ o kuntilenna jira. Donda sira caman bɛ u jigi da aliminiyɔmu / ABS composite frame hakilinaw kan. I bɛna 'aluminiyɔmu caman, nɛgɛ caman dɔgɔya' hakilina dɔ fana mɛn routeurw kama. A bɛ dɛmɛ ka girinya dɔgɔya ani ka teliya ka caya, kɛrɛnkɛrɛnnenya la board routing ni engraving boliw kama.

Routeur (routeur) labɛncogo danma dɔ yecogo teliya (hakilila) .

CNC Mill jɔcogo: Dilan girinman jɔlen + Kolon sɔgɔlen jɔlen

CNC mansin bɛ daminɛ ni hakilina wɛrɛ ye: masin ka kan ka tigɛ kɛlɛ. Mansin caman bɛ baara kɛ ni dilan girinman jɔlen ye ani sɔgɔlilan jɔlen ye. Hakilila la, tigɛkun bɛ to a gɛlɛn na ka sɔrɔ baarakɛyɔrɔ bɛ taa a jukɔrɔ.

O gɛlɛya in de ye ko bɛɛ ye. A ka c’a la, mansinw bɛ u jigi da nɛgɛdaga girinman kan / jiribolo gɛlɛn kan walasa ka tigɛcogo yɛrɛyɛrɛw minɛ. Ni nɛgɛminɛnw ye kinni kɛ kosɛbɛ, o jɔli bɛ to a cogo la. O kɔlɔlɔ ye sabatili ye doni girinmanw kɔrɔ, kɛrɛnkɛrɛnnenya la baara juguw waati.

I bɛna a sara ye baara lakika la:

• A ka fisa ni grooves jugumanw ye , drilling, ani stock gɛlɛnw bɔli

• A ka fisa ni dimensions control sirilen ye ni doni bɛ to sanfɛ

• Fɛn minnu bɛ se ka fɔ ka ɲɛ, olu ka ca ni puwɛntiw ni tigɛ fangaw kɛra juguya ye

Ni i delila ka routeur 'sing' kɔlɔsi tɛmɛsira girinmanw waati, i bɛ danfara dɔn o yɔrɔnin bɛɛ. Mansinw bɛ jɔ walasa k’o fanga ninnu nɔgɔya sanni u ka sɔn u ma.

Hakilila sketch: typique mill logique (a kana kɛ ka sɛgɛsɛgɛli kɛ) .

CNC Router vs CNC Mill structurel Comparison — Mun bɛ fɛn caman Changements dans la production

Sisan, yɔrɔ sannikɛlaw b’u janto o la: min bɛ Changé ni sɛnɛ daminɛna.

• Gɛlɛya ka ca → tigɛ fanga seko ka bon → nɛgɛ gɛlɛn masinw ka fisa

Mansinw bɛ minɛ kosɛbɛ ni baarakɛminɛnw bɛ jigin walima ni u donna u ka bɔrɛ kɔnɔ kosɛbɛ. O jɔcogo bɛ dɛmɛ ka tiɲɛni sabati ni tigɛ doni bɛ wuli.

• Gantry min bɛ taa nɔgɔya la → taama teliya ɲuman ye sɛbɛnw/tablow ye → a man ɲi kosɛbɛ nɛgɛ doni jugumanw ma minnu bɛ mɛn

Routerw bɛ se ka yɔrɔ caman datugu joona. U ka ɲi kosɛbɛ ni i ka cyclew teliyalen don ani ni tɛmɛsira bɛ to u ka rigidity dan kɔnɔ.

Sannikɛla bamanankan baarakɛcogo filɛ nin ye min bɛ wari mara. Ni i b’a fɛ ka tigɛ nɛgɛ gɛlɛnw , a ka c’a la, sigicogo bɛ ɲɛtaa latigɛ ka tɛmɛ feereli specs kan. Jatebla jugu bɛ se ka 'precision' tigɛli kɛ fɛn tiɲɛnenw ye, bawo yɛrɛyɛrɛ ni jiginni bɛ jira i n'a fɔ hakɛ juguw, baarakɛminɛn tiɲɛnenw, ani surface fini min tɛ bɛn ɲɔgɔn ma.

Marka hakilina, a bilalen bɛ cogo nɔgɔman na: Fɛn dilanni sira minnu sinsinnen bɛ spindle kan, fɛn dilannikɛlaw i n’a fɔ Zhong Hua Jiang (Huajiang Group) bɛ sinsin spindle sitɛmuw ni kɔlɔsili kɛcogo bɛnni kan ka kɛɲɛ ni masin suguya ye. O ɲɔgɔndan nafa ka bon bawo rigidité ni spindle control bɛ baara kɛ ɲɔgɔn fɛ, u tɛ baara kɛ ɲɔgɔn fɛ. O ye mun na routeur suguya sitɛmuw bɛ teliya cogoyaw bila jɔyɔrɔ fɔlɔ la, k’a sɔrɔ mill suguya sitɛmuw bɛ tigɛcogo sabatilenw bila jɔyɔrɔ fɔlɔ la.

CNC Router vs CNC Mill — Teliya, Torque, ani Tigɛ fanga

Ni mɔgɔw ye CNC Router vs CNC Mill suma ɲɔgɔn na , a ka c’a la, u bɛ kuma fɔlɔ fɛnw kan. Nka maana lakika bɛ daminɛ ni spindle kɛcogo ye. Teliya ni girinya cogoya bɛ tɛmɛsira o tɛmɛsira boli i bɛ boli. O kɔfɛ, o de bɛ i ka sanfɛla fini, baarakɛminɛnw ɲɛnamaya, ani fɛn tiɲɛnenw hakɛ cogoya.

Routers ni mills fila bɛɛ bɛ fɛnw bɔ. U b'a Kɛ dɔrɔn 'mood' wɛrɛw la.Mɔgɔ b'a ɲini ka Taa teliya la ka Tigɛ nɔgɔya la. Tɔɔ kelen bɛ doni girinmanw kɛlɛ ni sabatili jugu ye.

CNC Router baarakɛcogo ɲɛfɔli: RPM sanfɛ, Torque dɔgɔman

danma CNC routeur spindle pattern ye RPM caman ye ani periferi tigɛ teliya. Biti bɛ girin joona o la jiri, plastiki ani pankurun fɛnw bɛ tigɛ ka saniya. U fana ka teli ka girinya dɔgɔya ka tɛmɛ mansinw kan.

O jagokɛcogo bɛ i ka masinw dilanni fɛɛrɛ Changé. A ka ca a la aw bɛ tigɛw to teliya la ani u ka nɔgɔn dɔɔnin. I bɛ i yɛrɛ tanga deep plunge moves ma ka don nɛgɛ gɛlɛn na bawo structure ni spindle torque t’a fɛ o kɛlɛ.

A bɛ kɛ cogo min na don o don baarakɛcogo la, o filɛ nin ye. Router (routeur) bɛ tɛmɛn ni baara fanba ye graving, routing ani shallow profiles ye. Baarakɛminɛnw siraw bɛ se ka boli ka gɛlɛn ani ka teliya k’a sɔrɔ u ma masin doni i n’a fɔ nɛgɛ bɔlan.

• 'happy zone' fɛnw minnu bɛ sɔrɔ tuma caman na:

  • jiri, MDF , akiriliki, fomu, PVC

  • Baara min bɛ i n’a fɔ PCB, o bɛ kɛ pankurunw ni substratw kan

• Tigɛcogo min bɛ kɛ cogoya la:

  • taama teliya, juguya min bɛ kɔrɔsi, puwɛnti jɛlen jɔli

• Aw ka kan ka aw yɛrɛ tanga fɛn minnu ma:

  • bɔrɔ juguw sabatilenw nɛgɛ gɛlɛnw kɔnɔ

CNC Mill baarakɛcogo ɲɛfɔli: RPM dɔgɔya, Torque ka bon

CNC mansin bɛ baara kɛ ni spindle hakilina wɛrɛ ye: jiginni teliya dɔgɔya ka fara torque caman kan. O ɲɔgɔndan bɛ masin cycle girinmanw dɛmɛ. A bɛ grooving jugumanw, drilling ani stock bɔli ɲɛnabɔ k’a sɔrɔ a ma sɔgɔsɔgɔ.

Masina fana bɛ tigɛ fanga caman makɔnɔ. Mansin jɔcogo bɛ se k’o yɛrɛyɛrɛw minɛ k’a sɔrɔ baarakɛminɛnw jɔyɔrɔ bɛ to a cogo la. O de y'a To a ka c'a la 'nɛgɛ baara tigitigi' bɛ daminɛ ni sɔgɔli ye.

Nɛnɛ nafa ka bon yan fana. Mansin caman bɛ u jigi da ji nɛnɛma spindle kɛcogo kan walasa ka baara kɛ ni doni caman ye ka taa a fɛ. Ni o funteni-kɔlɔsili tɛ, baarakɛminɛnw sɛgɛn bɛ wuli ani tigɛcogo bɛ dɔgɔya.

• 'mill-friendly' baarakɛcogo waleyali:

  • drilling ni tapping dɛmɛni

  • jirisun jugumanw ani bɔrɔ girinmanw

  • masinw dilanni dense aluminiyɔmu, nɛgɛ, ani inox yɔrɔw

• 'kɔlɔsili' minnu bɛ kɛ cogoya la:

  • chips ni funteni mago bɛ ɲɛnabɔli la, jateminɛ tɛ

VFD ani Spindle Control — Detail Sannikɛlaw man kan ka ban

Teliya jatew kɔrɔ ye fɛn ye dɔrɔn n’u tora u cogo la tigɛtuma na. O de kama VFD ( Variable Frequency Drive (VFD) ) / inverter matching bɛ kɛ sistɛmu wajibiyalen ye, a tɛ kɛ ŋaniyataama ye.

Routers ni mills fila bɛɛ mago bɛ spindle control basigilen na. Boli lakikaw la, teliya sabatibali bɛ jira i n’a fɔ jikuruw, baarakɛminɛnw sɛgɛnni min tɛ bɛn ɲɔgɔn ma, ani fiɲɛ minnu bɛ segin-ka-bɔ. A bɛ nɔ bila fana balo hakɛ 'dugukolo' cogo min na fɛn in kan.

Misali la, fɛn dilannikɛla dɔw minnu sinsinnen bɛ spindle kan, olu ka di Zhong Hua Jiang (Huajiang Group) ye spindle systems dilan ɲɔgɔn fɛ ni VFD/inverter matching ye walasa ka teliya kɔlɔsili sabatilen dɛmɛ u ka routeur ni mill-type layiniw kan.

O jɛ-ka-baara in nafa ka bon bawo a bɛ dɔ Bɔ tuning (tuni) waati la. A fana bɛ ekipuw dɛmɛ u ka telefɔni tigɛcogo paramɛtiriw da minnu bɛ se ka da u kan joona.

• Kɔlɔsili sabatili bɛ dɛmɛ min na:

  • surface fini min bɛ kɛ tuma bɛɛ

  • baarakɛminɛn ɲɛnamaya min bɛ se ka fɔ ka ɲɛ

  • sɛnɛfɛnw dilanni sɛrɛkili minnu bɛ se ka segin-ka-bɔ

Feed Rate, Machining Cycle, ani I bɛna min ye butiki kɔnɔ

Dugukolo kan, cycle waati ye yɔrɔ ye kiliyanw bɛ danfara dɔn yɔrɔ min na. CNC routeur ka teli ka cycle surunya fɛn nɔgɔlenw na bawo tigɛ teliya la bɛ puwɛnti bɔli to ka ɲɛ. Baarakɛminɛnw siraw bɛ se ka taa teliya la yɔrɔbaw kan k’a sɔrɔ u ma girinya kojugu ɲini.

A ka c’a la, CNC mansin bɛ boli ka mɛn bawo fɛn gɛlɛnw bɛ balo ɲuman de wajibiya, ka baara kɛ ka dun, ani ka funteni mara. Nka mansin 'se' bawo a bɛ se ka nɛgɛ gɛlɛnw gɛrɛgɛrɛ ni dannaya ye. O sɛrɛkili bɛ se ka janya, o bɛɛ n’a ta, o yɔrɔ bɛ bɔ ka ɲɛ a siɲɛ fɔlɔ la.

Gɛlɛyaw ɲɛnabɔcogo teliya link-style logic: n’i ye routeur jugumanw/feeds gɛrɛ nɛgɛ gɛlɛnw kɔnɔ, vibration ni tiɲɛni farati bɛ bonya. Bitiw bɛ kuma, surface quality bɛ jigin, i b’a sara baarakɛminɛn karilenw na ka baara kɛ kokura.

• Butigi-dakun taamasiɲɛ minnu bɛ sɔrɔ ɲɔgɔndan jugu la:

  • router chatter waati gɛlɛnw tɛmɛnenw na

  • mansin sumaya kojugu ka bɔ nɛnɛfɛnw minɛcogo jugu la

  • hakɛ minnu tɛ bɛn ɲɔgɔn ma ka da tigɛ fanga sabatibaliw kan

 

CNC Router vs CNC Mill — Fɛnw bɛnkan (Masin kelen-kelen bɛɛ bɛ baara kɛ yɔrɔ min na ka ɲɛ)

Sugandili kɛli cɛ CNC Router ni CNC Mill , o bɛ tali kɛ tiɲɛ na fɛnw na ani masin bɛ se ka 'comfortably' min gɛlɛya. Mɔgɔw ​​ka teli ka pan ka ɲɛsin RPM walima brand specs ma. Tiɲɛ na, tigɛ fanga, gɛlɛya ani chip kɛcogo bɛ a kɔlɔlɔ latigɛ joona.

Ni an ye masin bɛn ni fɛn suguya bɛnnen ye, fɛn bɛɛ bɛ kɛ cogo la min bɛ nɔgɔya: baarakɛminɛnw karilen ka dɔgɔn, a dakunw bɛ saniya, ani fɛn tiɲɛnenw ka dɔgɔ. Ni an tɛ bɛn ɲɔgɔn ma, a ka c’a la, o ye kumakanw ye, minnu bɛ sumaya kojugu, ani tigɛlanw minnu bɛ dulon, olu musaka ka ca ni warimara fɔlɔ ye.

Fɛn minnu ka fisa ni CNC Routerw ye (Soft & Medium-Density Fɔlɔ)

A ka c’a la, routeur bɛ yeelen bɔ baarakɛminɛn nɔgɔlenw ni minnu ka bon kosɛbɛ. A bɛ labɛn ka kɛ doni teliyalenw ye minnu ka nɔgɔn. O de y’a to pankurun yɔrɔw, ja, ani sɛbɛnfura baara ye yɔrɔ ye ekipuw bɛ bɛnkan ɲuman ye yɔrɔ minnu na.

Nin ye routeur-friendly list ye ka bɔ butiki misali lakikaw la:

• jiri, MDF , akiriliki, fomu, PVC

• PCB substrat ani panneau finman layɛrɛw

• jiri min bɛ kɛ ka ja dilan, ka siraw da, ani ka jatebɔ kɛ

• nɛgɛ nɔgɔlen nɔgɔlen minnu tɛ nɛgɛ ye (aluminiyɔmu/nɛgɛ jɛlen hakilinaw) .

Router baarakɛcogo bɛ ni dan ye. Occasional shallow soft aluminium is possible , nka nɛgɛ tigɛcogo kuntaalajan walima nɛgɛ gɛlɛn tigɛcogo ye bɛnbaliya ye ni routeur rigidité typical ye. N’i ​​y’a Lajɛ cogo o cogo, a ka c’a la, u bɛ basigi Bɔ u cɛmancɛ la. Baarakɛminɛnw bɛ sɔgɔsɔgɔ, ani u hakɛw bɛ wuli.

Fɛn minnu ka fisa ni CNC Mills ye (Nɛgɛ gɛlɛnw ani Stock gɛlɛnw)

dɔ CNC mansin jɔra tigɛ doni girinmanw ni fɛn caman kama. A jɔcogo bɛ Se ka yɛrɛyɛrɛ ni fanga min bɛ Bɔ tigɛcogo jugumanw na, o Kùnbɛn. O de y’a to mansinw ye default ye nɛgɛfeerelaw fɛ minnu mago bɛ masinw na minnu bɛ se ka fɔ ka ɲɛ.

Mills bɛ 'hard material full-spectrum' dakun dɔ datugu, i n'a fɔ:

• gɛlɛn aluminiyɔmu bloki

• kuran sɔgɔlen

• carbone nɛgɛ min , bɛ kɛ ni nɛgɛ ye min tɛ sɔgɔ

• titaniyɔmu sɔgɔlen

• ka fara injiniyɛri plastikiw kan minnu ka gɛlɛn kosɛbɛ ani fɛn minnu ka bon kosɛbɛ

Seko ni dɔnko sɔrɔlenw bɛ kɛ, wa u bɛ se ka segin u kan.

• grooving juguman min bɛ to ka tilennen

• drilling ani pocketing kɔrɔsilen

• stock gɛlɛnw bɔli k'a sɔrɔ masin ma 'bìnkanni kɔrɔ'.

Nɛnɛ fana nafa ka bon nɛgɛ gɛlɛnw sɛgɛsɛgɛli waatiw la. Ni doni bɛ to sanfɛ, funteni sabatili bɛ dɛmɛ ka baarakɛminɛnw ɲɛnamaya ni u sanfɛla finiw to u cogo la kuluw kɔnɔ.

CNC Router vs CNC Mill Material Fit sɛgɛsɛgɛli sɛbɛn (Sugandili teliya)

Aw bɛ baara kɛ ni nin ɲɔgɔndan teliya sariya ye ni aw bɛ aw ka sɛnɛfɛnw ɲagaminen labɛn. A bɛ baara kɛ bawo a bɛ fɛn suguya siri ɲɔgɔn na ni masin jɔcogo bɛ min makɔnɔ tigɛ waati la.

• Ni i ka baara fanba ye pankurunw/sɛbɛnw + ja/tigɛ , sugandi router-fit .

• A bɛ baara kɛ ka ɲɛ panɛli siraw labɛnni na, taamasiyɛnw cogoya labɛncogo, ani ja segin-seginlenw kan fɛn nɔgɔlenw kan.Ni i ka baara fanba ye nɛgɛ gɛlɛnw yɔrɔw ye + fɛn juguw + muɲuli sirilen , i ka mill-fit sugandi.

Gɛlɛya ni tigɛ fanga se bɛ dɛmɛ ka hakɛw sabati ka sɔrɔ baarakɛminɛnw bɛ baara gɛlɛn kɛ.N’i ye nin layini fila in to i hakili la, i ka masin sugandili bɛ kɛ jateminɛ ye min tɛ kɛ. A bɛ kɛ bɛnkan ye i bɛ min tigɛ ani masin bɛ tigɛ fanga minɛ cogo min na.

CNC Router ni CNC Mill — Musaka danfara (Sanni sɔngɔ ni boli musaka)

Ni sannikɛlaw bɛ CNC Router vs CNC Mill ɲini , u ka teli ka daminɛ ni stika sɔngɔ ye. O ye normal ye. O kɔfɛ, tiɲɛ bɛ gosi: baarakɛminɛnw, nɛnɛ, fanga ani jɔli waati de bɛ a tigi musaka lakika latigɛ.

N’i ​​ye masin jugu ta i ka minɛnw kama, i tɛ waati tiɲɛ dɔrɔn. I bɛ wari sara ni fɛn karilenw ye, yɔrɔ tiɲɛnenw, ani ladonni baara caman fɛ ka tɛmɛ i ka kulu tun ye min labɛn.

Sanni musaka min bɛ kɛ ka kɔn o ɲɛ: Fɛn min bɛ sɔngɔ bila

Kɔrɔlen musaka bɛ bɔ yɔrɔ fila de la kosɛbɛ: masinw jɔcogo ani spindle engineering. A ka c’a la, routeurw bɛ baara kɛ ni frame nɔgɔman ye ani sistɛmu ye min labɛnna teliya tigɛcogo kama. A ka c’a la, mansinw bɛ baara kɛ ni fɛn girinman ye min bɛ kɛ ni bɔgɔdaga ye ani ni spindle setup ye min ka gɛlɛn kosɛbɛ. Tuma caman na, mansinw mago bɛ fɛnw na minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye, minnu bɛ kɛ ni ji ye, minnu bɛ nɛnɛ kosɛbɛ, o bɛ musaka dɔ fara a kan.

O de kama 'gap' bɛ se ka kɛ i n'a fɔ a ka bon kosɛbɛ. Butigi caman na, mansin fitinin min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, a ka c’a la, o bɛ se ka bonya siɲɛ ~2–4 ka tɛmɛ sanfɛla-sira-sira-kulu suguya kan min bɛ se ka suma ɲɔgɔn ma, kɛrɛnkɛrɛnnenya la ni spindle ni thermal management tɛ kelen ye.

Musaka teliya bolibagaw (hakɛ kelen, jɔli fɔlɔfɔlɔko danfaralenw) .

• Router bɛ jɔ : karamɔgɔ ka nɔgɔn, lamaga teliya la, funteni jigiya nɔgɔman

• Mill jɔli : fɛn girinman cast frame, rigidity-focused design, high-torque spindle ani cooling requirements

• Sistɛmu bɛnkan: spindle + control behavior bɛ nɔ bila i ka kan ka min san kɔfɛ (cooling, VFD setup, accessoires)

Opereli kɔfɛ Boli musaka: TCO tilali dogolen

Ekipu fanba bɛ yɔrɔ min dɔgɔya, o filɛ nin ye. Hali ni routeur musaka ka dɔgɔ ka kɔn o ɲɛ, a boli musakaw bɛ bɔ i ka fɛn dilannen bɛ min ɲini tiɲɛ na. Tuma caman na, routeurw musaka ka dɔgɔn nɛnɛfɛnw na bawo setup caman bɛ baara kɛ ni fiɲɛ nɛnɛ ye. U mago bɛ buguri saniya tuma bɛɛ la hali bi ani ladonni sariyalen na, o min bɛ se ka ɲɛnabɔ.

A ka c’a la, mansinw musaka ka ca ni u bolicogo ye. U bɛ fanga camanba makɔnɔ. U bɛ nɛnɛfɛnw dicogo fana wajibiya, ji minɛcogo, ani ji caman cili labɛnni. Doni girinmanw kɔrɔ, mansinw mago bɛ sɛgɛsɛgɛli ni ladonni sɛrɛkili caman na walasa baarakɛcogo ka sabati.

Wa o kɔfɛ 'waati-ka-sara.' bɛ yen Ni routeur dɔ sɔngɔ ka dɔgɔ nka i ka material mix b'a Gɛn ka Tɛmɛ a comfort zone kan, i bɛ baarakɛminɛnw karilen ni scrap ye. O bɛ warimaralenw tigɛli kɛ bɔnɛ dogolenw ye joona.

• Routɛri bolicogo- musaka kɛcogo:

  • nɛnɛji musaka ka dɔgɔn (a ka ca a la, a bɛ nɛnɛ fiɲɛ fɛ) .

  • buguri saniyacogo kɔrɔlen ani ladonni cadence standard

• Mill boli- musaka kɛcogo:

  • fanga baaracogo min ka bon

  • nɛnɛmafɛnw sɔrɔli + ji musakaw waati kɔnɔ

  • sɛgɛsɛgɛli ka caya tigɛ doni gɛlɛn kɔrɔ

Baarakɛminɛnw ni fɛnw (Muɲu minnu bɛ Changé ka kɛɲɛ ni fɛnw ye) .

Baarakɛminɛnw doncogo ye budget fagabaga ye min tɛ kuma. Fɛn gɛlɛnw bɛ tigɛlan sɛgɛn teliya. Tigɛ doni min ka bon, o fana bɛ baarakɛminɛnw ɲɛnamaya Changé kosɛbɛ. O la, bitiki sanni sɔngɔ kelen bɛ se ka kɛ baarakɛminɛnw cili waati danfaralenba ye.

Tiɲɛ na, a bɛ i n’a fɔ nin: routeur baara min bɛ to jiri, MDF, acrylique, foam, PVC, ani PCB ɲɔgɔnna baara la, o bɛ se ka baarakɛminɛnw ɲɛnamaya janya. Mansin baara min bɛ nɛgɛ gɛlɛnw tigɛ, o bɛ se ka kɛ sababu ye ka baarakɛminɛnw sugandi ka ɲɛ, ka u bila u nɔ na tuma caman, ani ka taabolo kɔlɔsi kosɛbɛ walasa u kana sɛgɛn joona.

• Mun na baarakɛminɛnw ɲɛnamaya bɛ Changé:

  • fɛn gɛlɛnw bɛ tigɛlan sɛgɛn teliya

  • tigɛ doni caman bɛ fɛn caman Changer replacement cadence

  • tigɛ fanga ɲɔgɔndan bɛ nɔ bila baarakɛminɛnw bɛ degun sɔrɔ cogo min na cogo kelen na

 

Ɲininkaliw

J: Danfaraba jumɛn bɛ CNC Router ni CNC Mill cɛ?

A: Jatebɔ ni spindle profile. Routers bɛ bɛn sheet/wood/PCB baara nɔgɔlen ma ni RPM caman ye ani torque dɔgɔman. Mansinw bɛ bɛn nɛgɛ gɛlɛnw ma ni RPM dɔgɔman ye, ni girinya ka bon, ani ni tigɛ ka dun.

J: Yala CNC routeur bɛ se ka nɛgɛ tigɛ wa?

A: Ɔwɔ, fɛn nɔgɔlenw/min tɛ nɛgɛ ye walima aliminiyɔmu baara nɔgɔmanw kama. A man ɲi tigɛ gɛlɛnw na, minnu ka dun ka kɛ nɛgɛ gɛlɛn ye waati jan kɔnɔ.

J: CNC mill bɛ se ka engrave kɛ wa?

A: Ɔwɔ. Mansinw bɛ se ka ja dilan, nka u ka baarakɛminɛnw n’u ka gɛlɛya bɛ ɲɛ fɔlɔ nɛgɛ dilanni kama, o la, ja dilanni bɛ se ka kɛ baara filanan ye.

J: Juman de bɛ tiɲɛ ka tɛmɛ: CNC Router walima CNC Mill?

A: A ka c’a la, CNC mansinw bɛ kɛ ka ɲɛ ani u bɛ se ka segin u kan walasa ka muɲuli gɛlɛnw kɛ k’a sababu kɛ u gɛlɛyali ka gɛlɛn.

J: Juman ka dɔgɔn fɛn bɛɛ lajɛlen na: CNC Router vs CNC Mill?

A: Tuma caman na, routeurw musaka ka dɔgɔn ka kɔn o ɲɛ. Mills bɛ se ka sɔngɔ dɔgɔya musaka bɛɛ lajɛlen na ni routeur danw bɛna kɛ sababu ye ka baarakɛminɛnw tiɲɛ walima ka kari.

J: Yala CNC mansinw mago bɛ nɛnɛmafɛn na wa?

A: A ka c’a la, ɔwɔ, walasa ka nɛgɛ gɛlɛnw sabati ani ka sumaya kojugu kunbɛn.