NEMA 28 Stepper Motor Kɔkɔ Torque 1.8 ° 2-Afɔɖeɖe Hybrid Stepper na CNC, 3D Agbalẽtamɔ̃, Robotics, Automation, DIY Dɔwo

  01 Nyatakaka Gbãtɔ  

Wotrɔ asi le NEMA 28 ƒe torque gã 2 phase hybrid stepper motor sia ŋu na ʋuʋu dzikpɔkpɔ ƒe ɖoɖowo si le sue ŋutɔ. Enaa 1.8° afɔɖeɖe ƒe dzogoe, 3.8V ƒe ʋuʋudedi si woɖo ɖi, 0.8A ƒe ʋuʋudedi si woɖo ɖi, kple torque si li ke léle ɖe asi na CNC mɔ̃wo, automation dɔwɔnuwo, robotwo, 3D agbalẽtamɔ̃wo, kple OEM ʋuʋu dzikpɔkpɔdɔwo.

Nu	Nusiwo wogblɔ tso eŋu
Akpawo ƒe Agbɔsɔsɔ	2
Afɔɖeɖe ƒe Dzogoe	1.8° ±5% ƒe didime.
Voltage si woɖo ɖi	3.8V ƒe didime
Rated Fifia	0.8A
Agladzedze	5.6Ω ±10% le dzoxɔxɔ 20°C me
Inductance ƒe dɔwɔwɔ	3.8mH ±20% le 1kHz, 1Vrms
Torque si Wolé Ðe asi	Ne ewu 0.06Nm min.
Detent Torque ƒe dɔwɔwɔ	Le ete 0.4N.cm max.
Rotor ƒe Dɔwɔnuwɔna	9g.cm⊃2 ƒe didime;
Kplɔla ƒe Atsyã	AWG26 UL1061 ƒe ƒuƒoƒo
Insulation ƒe Klass	Klass B. ƒe klass
Dielectric Ŋusẽ	500V AC, miniti 1
Insulation ƒe Tsitretsitsi	Ne ewu 100MΩ min.
Agba si Woɖe Mɔ Na si Wotsɔ Tua Nu	3N
Radial Load si ŋu woɖe mɔ ɖo	21N le shaft ƒe nuwuwu

  02 Elektrikŋusẽ ƒe Nyatakakawo  

Kpɔɖeŋu No.	Afɔɖeɖe ƒe Dzogoe	Motor ƒe Didime	Voltage ƒe ʋuʋudedi	Fifia	Agladzedze	Inductance ƒe dɔwɔwɔ	Torque si Wolé Ðe asi	Nusiwo mewɔa dɔ o	Kpekpeme
	°	L/mm	V	A. A	Ω ƒe Ω	mH	mN.m	g.cm⊃2 ƒe ƒuƒoƒo;	g
11HS3406 ƒe xexlẽdzesi	1.8	53	3.8	0.67	5.6	3.8	60	9	110

  03 Dzidzeme  

  Wiring ƒe Nɔnɔmetata  

  04 Mɔ̃ɖaŋununya ƒe Nɔnɔmewo  

Afɔɖeɖe ƒe Dzogoe ƒe Nyateƒetoto	±5% .
Tsitretsitsi ƒe Nyateƒetoto	±10% .
Inductance ƒe Nyateƒetoto	±20% .
Dzoxɔxɔ ƒe Dzidziɖedzi	80°C Max.
Insulation ƒe Tsitretsitsi	100MΩ Min. 500V DC ƒe ŋusẽ
Dielectric Ŋusẽ	500V AC 1 Aɖabaƒoƒo
Radial Load si ŋu woɖe mɔ ɖo	21N
Agba si Woɖe Mɔ Na si Wotsɔ Tua Nu	3N

  05 Adzɔnuwo ƒe Viɖewo  

• 2 phase hybrid stepper motor na ʋuʋu dzikpɔkpɔ pɛpɛpɛ.

• 1.8° afɔɖeɖe ƒe dzogoe doa alɔ teƒe si sɔ pɛpɛpɛ kple dɔwɔwɔ nyuie.

• NEMA 28 ƒe xɔtunu ƒe lolome si le sue na teƒe si woatsɔ aɖoe si seɖoƒe li na.

• 60mN.m léle torque na automation si le bɔbɔe kple CNC dɔwɔwɔwo.

• Klass B insulation kple 500V AC dielectric ŋusẽ na kakaɖedzi dɔwɔwɔ.

• Esɔ na OEM stepper motor dɔwo, CNC ʋuʋu ɖoɖowo, kple automation dɔwɔnuwo.

  06 Dɔbiagbalẽviwo  

• CNC router kple CNC engraving mɔ̃ axis dziɖuɖu

• 3D agbalẽtamɔ̃ kple dɔwɔnu sue siwo wɔa dɔ le wo ɖokui si

• Robot kple teƒe si woɖo ɖi pɛpɛpɛ ƒe ɖoɖowo

• Mɔ̃ siwo wotsɔ blaa nu kple dɔwɔnu siwo wotsɔ dea dzesi nu

• Atikewɔnuwo kple nudokpɔƒe ƒe dɔwɔnuwo

• Custom OEM ʋuʋu dziɖuɖu ɖoɖowo

  07 Adzɔnuwo ƒe Ðaseɖigbalẽ  

  Nyabiasewo ƒe Nyabiasewo  

Nukae nye afɔɖeɖe ƒe dzogoe si le NEMA 28 stepper motor sia ŋu?

Afɔɖeɖe ƒe dzogoe nye 1.8° ±5%, si doa alɔ teƒe si sɔ pɛpɛpɛ na CNC, automation, robotics, kple ʋuʋu dzikpɔkpɔdɔwo.

Nukae nye elektrikŋusẽ kple elektrikŋusẽ si woɖo ɖi?

Voltage si woɖo ɖi la nye 3.8V eye elektrikŋusẽ si woɖo ɖi la nye 0.8A.

Nukae nye mɔ̃ sia ƒe asiléƒe ƒe ŋusẽ?

The holding torque nye 60mN.m, si sɔ na compact precision motion systems siwo hiã torque ƒe dodo si li ke.

Dɔ kawoe 2 phase hybrid stepper motor sia sɔ na?

Esɔ na CNC mɔ̃wo, nuwo wɔwɔ le wo ɖokui si ƒe dɔwɔnuwo, robotwo, 3D agbalẽtamɔ̃wo, nubablɛmɔ̃wo, nudokpɔƒe dɔwɔnuwo, kple OEM ʋuʋu dzi kpɔkpɔ ƒe ɖoɖowo.

Ðe kaƒoƒo ƒe nɔnɔmetata kple didime ƒe nɔnɔmetata le axa sia?

Ɛ̃. Mɔ̃ɖaŋununya ƒe didime ƒe nɔnɔmetatawo kple kaƒoƒo ƒe nɔnɔmetata le adzɔnuwo ƒe axaa dzi be wòakpe ɖe mɔ̃ɖaŋudɔwɔlawo ŋu woaɖo kpe teƒe si woaɖoe ɖo kple kaƒoƒo ƒe nudidiwo dzi.