|
11HS3406
Zhong Hua Jiang
3.8V
110G
0.8A
53 limilimithara
Enjene ea Zhong Hua Jiang 11HS3406 28mm NEMA 11 ea mekhahlelo e 'meli ea hybrid stepper e etselitsoe ho beha maemo a kopaneng le motsamao o laolehileng oa lisebelisoa tsa CNC, likopano tsa othomathike, liroboto le litsamaiso tsa taolo ea motsamao oa OEM. Litlhaloso tsa motlakase tse phatlalalitsoeng li kenyelletsa sekhahla sa mohato oa 1.8 °, sekhahla sa maqhubu a 3.8V le torque e fokolang ea 0.06 N·m (60 mN·m).
Enjene ena e sebelisa sehlopha sa boholo ba foreimi ea 28mm eo hangata e tsejoang e le NEMA 11. Ho tšoaneleha ha eona bakeng sa morero ho ipapisitse le litekanyo tse ntseng li phahama, torque e fumanehang, litlhophiso tsa mokhanni oa stepper, mojaro oa mochini le lebelo le hlokahalang. Hlahloba litlhaloso le litšoantšo tsa mantlha tse ka tlase pele u netefatsa tlhahiso e ncha kapa taelo ea tlhahiso.
Kopa lintlha tsa Stepper Motor &
| Ntho ea Khopolo | Litlhaloso tsa |
|---|---|
| No. ea Mekhahlelo | 2 |
| Mohato Angle | 1.8° ±5% |
| Rated Voltage | 3.8V |
| E Lekanyelitsoe Hona Joale (Tlhaloso e Akaretsang) | 0.8A |
| Khanyetso | 5.6Ω ±10% ho 20°C |
| Inductance | 3.8mH ±20% ho 1kHz, 1Vrms |
| Ho tšoara Torque | 0.06 N·m bonyane (60 mN·m / 6 N·cm) |
| Detent Torque | 0.4 N·cm boholo |
| Rotor Inertia | 9 g·cm² |
| Mokhoa oa ho etella pele | AWG26 UL1061 |
| Sehlopha sa Insulation | Sehlopha sa B |
| Matla a Dielectric | 500V AC, motsotso o le mong |
| Khanyetso ea Insulation | 100 MΩ bonyane |
| Dumelletswe Moroalo | 3N |
| E lumelletsoeng Mojaro oa Radial | 21N qetellong ea shaft |
Tlhaloso e akaretsang e thathamisa 0.8A, ha tafole ea mohlala ea motlakase e ka tlase e thathamisa 0.67A bakeng sa 11HS3406. Netefatsa boemo bo nepahetseng ba boemo ba hajoale khahlano le leibole ea enjene e fanoeng le litokomane tse ikhethileng pele u beha mokhanni oa stepper. Ho hlokahala mokhanni oa mehato e 'meli o laoloang hajoale bakeng sa ts'ebetso e nepahetseng ea koloi.
Tafole e latelang e boloka lintlha tsa motlakase tse hatisitsoeng tsa mohlala 11HS3406, ho kenyeletsoa bolelele ba enjene, lintlha tsa matsoelintsoeke, torque e ts'oereng, inertia le boima ba 'mele.
| Moetso oa No. | Lehono la Mohato (°) | Bolelele ba Motlakase (mm) | Voltage (V) | Hona Joale (A) | Resistance (Ω) | Inductance (mH) | Holding Torque (mN·m) | Inertia (g·cm²) | Boima (g) |
|---|---|---|---|---|---|---|---|---|---|
| 11HS3406 | 1.8 | 53 | 3.8 | 0.67 | 5.6 | 3.8 | 60 | 9 | 110 |
Rated winding voltage ha se khothaletso e tobileng ea ho hokela enjene mohloling oa motlakase o tsitsitseng. Khetha mokhanni o lumellanang le bipolar stepper, netefatsa likhokahano tse etellang pele ebe o seta mokhanni oa hona joale o sebelisa lintlha tse netefalitsoeng tsa koloi. Torque ea ho matha e fapana ho ea ka lebelo la motlakase, motlakase oa phepelo ea mokhanni le maemo a taolo.
Lekola metako ea mantlha ea mochini bakeng sa moralo oa foreimi, paterone ea lesoba, boholo ba shaft le sebaka sa ho kenya. Tafole ea motlakase e hatisitsoeng e thathamisa bolelele ba enjene ea 53mm. Netefatsa ho tsamaellana ha dimensional le tlhophiso e nepahetseng ea 11HS3406 pele o rala thaba kapa o laela hore e nke sebaka.
Sebelisa setšoantšo sa pele sa lithapo se ka tlase ho tseba likarolo tse peli tsa motlakase. Netefatsa lipara tsa 'nete tsa li-coil, mebala ea lithapo le litheminale tsa mokhanni pele o hokela enjene. Se ke oa hokela kapa oa hakolla likhoele tsa li-stepper motor ha mokhanni a ntse a le matla.
| Mohato Angle Ho Nepaha | ±5% |
| Ho Nepaha ha Khanyetso | ±10% |
| Ho nepahala ha Inductance | ±20% |
| Mocheso Ho phahama | 80°C boholo |
| Khanyetso ea Insulation | 100 MΩ bonyane ho 500V DC |
| Matla a Dielectric | 500V AC bakeng sa motsotso o le mong |
| E lumelletsoeng Mojaro oa Radial | 21N |
| E lumelletsoeng Mojaro oa Thrust | 3N |
Enjene e hlalosoa ka insulation ea Sehlopha sa B le maemo a teko a thathamisitsoeng ka holimo. Boleng ba torque ea ho ts'oara bo sebetsa ha bo eme tlas'a matla a nepahetseng 'me ha boa lokela ho nkoa e le torque e tsoelang pele e fumanehang ka lebelo le leng le le leng. Lekola inertia ea mojaro, ho potlakisa le moeli o hlokahalang oa torque nakong ea khetho ea sistimi.
Kaho e nyalisitsoeng ea mekhahlelo e 'meli: Bakeng sa ho potoloha ho laolehileng ho nang le mokhanni ea loketseng oa stepper.
1.8 ° mohato oa angle: E fana ka mehato e 200 e felletseng ka phetoho e 'ngoe le e 'ngoe ea mochini pele u tsamaea.
Sehlopha sa foreimi ea Compact 28mm: E loketse ho kopanngoa mecheng ea boemo bo lekanyelitsoeng ea sebaka.
60 mN·m bonyane ba torque e ts'oereng: E fana ka tšupiso e hatisitsoeng ea torque bakeng sa khetho ea mojaro.
Litšobotsi tse hatisitsoeng tse hatisitsoeng: Resistance le inductance data e tšehetsa tlhahlobo ea mokhanni oa mokhanni.
Sehlopha sa B sa ho kenya letsoho: Ka maemo a hatisitsoeng a dielectric-matla le ho hanyetsa ho hanyetsa.
Litšupiso tsa mochini le lithapo: Metako ea boholo le ts'ehetso ea ts'ehetso ea setšoantšo sa wiring.
Buisanang ka Stepper Driver Matching & OEM Supply
Enjene ea 11HS3406 stepper e ka hlahlojoa bakeng sa lits'ebetso tse tsamaeang hantle tse tsamaeang hantle. Ho tšoaneleha ha 'nete ho ipapisitse le torque ka lebelo le hlokahalang la ho matha, sebaka se fumanehang sa ho kenya le litšobotsi tsa mojaro.
CNC router le CNC fatling mochine axis taolo
Li-printer tsa 3D le lisebelisoa tsa compact automation
Liroboto le mekhoa ea ho beha maemo
Mechine ea ho paka le lisebelisoa tsa ho ngola
Lisebelisoa tsa bongaka le lisebelisoa tsa laboratori
Sistimi e ikhethileng ea OEM ea taolo ea motsamao
Bakeng sa theko ea OEM, fana ka mofuta oa enjene, palo e hlokahalang, boholo ba ho kenya le shaft, lintlha tsa mokhanni oa stepper le maemo a ts'ebetso a shebiloeng. Lintlha tsena li thusa ho lekola hore na li lumellana le kopo ea hau.
Setšoantšo sa setifikeiti se fanoeng le lintlha tsa mantlha tsa sehlahisoa se bolokiloe ka tlase. Bakeng sa merero e hlokang setifikeiti se itseng kapa litokomane tsa tumellano, netefatsa sebaka sa setifikeiti, sehlopha se fanang ka thepa le mofuta o sebetsang oa makoloi pele o etsa odara.
Karolo ea eona e thathamisitsoeng ea mohato ke 1.8° ±5%, e tsamaellanang le mehato e 200 e felletseng ka phetohelo. Mokhanni ea tsamaellanang a ka fana ka microstepping bakeng sa li-increments tse laetsoeng hantle.
Foreimi ya lisekoere tsa 28mm hangata e hlophiswa e le NEMA 11. Netefatsa boholo ba nnete ba ho hlongoa ho tswa ho motako o fanoeng wa motjhini bakeng sa phetolo e kgethilweng.
Lethathamo la motlakase le thathamisitsoeng ke 3.8V. Sebelisa mokhanni oa mehato e 'meli e laoloang hajoale, 'me u bapise litlhophiso tsa mokhanni le lintlha tse netefalitsoeng tsa makoloi.
Tlhaloso e akaretsang e hatisitsoeng e thathamisa 0.8A, ha tafole ea mohlala oa motlakase e thathamisa 0.67A. Netefatsa boemo bo reriloeng ho tsoa ho nameplate ea enjene kapa data e ikhethileng ea mohlala pele o lokisa mokhanni.
Torque e hatisitsoeng e fokolang ke 0.06 N·m (60 mN·m kapa 6 N·cm). Ena ke tekanyo ea ho ts'oara-torque ho e-na le boleng bo sa khaotseng ba torque.
Tafole ea mohlala e thathamisa bolelele ba enjene ea 53mm le boima ba 110g. Netefatsa litekanyo tsa shaft le 'mele setšoantšong se ikhethileng pele u phethela moralo oa mochini.
Enjene e nyalisitsoeng ea mekhahlelo e 'meli e kanna ea sebetsoa ho sebelisoa mokhanni oa stepper stepper o lumellanang. Netefatsa terata ea mohato, litlhophiso tsa hajoale le torque e hlokahalang bakeng sa ts'ebeliso.
Ee. Lintlha tsa mantlha tsa sehlahisoa li kenyelletsa litšoantšo tse peli tsa boholo ba mochini le setšoantšo sa lithapo tsa mekhahlelo e 'meli. Tsena li bonts'itsoe karolong ea Dimension ka holimo.
Lisebelisoa tse ka bang teng li kenyelletsa lilepe tsa compact CNC, liprinta tsa 3D, liroboto, mechini ea ho paka, lisebelisoa tsa laboratori le lisebelisoa tsa boemo ba OEM, ha feela koloi e kopana le torque, lebelo le litlhoko tsa boholo.
Fana ka mofuta oa enjene, litekanyo tse ntseng li hola, maemo a hlokahalang a ts'ebetso, tlhaiso-leseling ea mokhanni, palo e lebelletsoeng le 'maraka oa moo o eang. Kenyelletsa litšupiso life kapa life tse ling kapa litlhoko tsa khokahano.
