Ulapha: Ikhaya »» Iimveliso » I-motor motor » »» »» »» »» »» »i-NEMA YESIBINI

I-NEMA 3 I-TERPER I-TRECE I-TRECE 1.8 ° I-2 ° 2-Isigaba seHarbrid HY, iprinta ye-3D, iirobhothi, ezenzekelayo, iiprojekthi ze-DIY

Yabelana:

I-NEMA 3 I-TERPER I-TRECE I-TRECE 1.8 ° I-2 ° 2-Isigaba seHarbrid HY, iprinta ye-3D, iirobhothi, ezenzekelayo, iiprojekthi ze-DIY

Ukufezekisa ulawulo lwentshukumo echanekileyo kunye ne-NEMA 28 i-30 motor, yenzelwe ukusebenza okuphezulu kuluhlu olubanzi lwezinto ezenzekelayo kunye nezicelo ze-DY.

Imodeli:
I-11hs3406
Brand:
Zhong hua jiang
I-Voltage:
3.8V
Ubunzima:
I-110g
Okwangoku:
0.8A
Ubude:
I-53mm

Ukufumaneka:

Ubungakanani:



Buza Yongeza kwibhasikithi

Ingcaciso yeMveliso

I-01 Jikelele

I-11hs3406 (1) -1

Into	Inkcazo
Isigaba	2
Intetho yengelosi	I-1.8 ° ° ± 5%
I-Voltage eDityanisiweyo	3.8V
Ikalwe okwangoku	0.8A
Ukumelana	5.6 OHM ± 10% kwi-20 ° C
Isikhuseli	3.8 MH ± 20% kwi-1khz, i-1vmms
Ukubamba i-torque	Ngaphezulu kwe-0.06 nm / imiz
Ubuchule	Ngezantsi 0.4 n.cm/max
I-rotor inertia	9 G.CM⊃2;
Isitayile esikhokelela	Awg26 I-UL1061
Iklasi yokufakelwa	Iklasi b
Amandla kaDiacritric	I-500v i-AC 1 i-AC
Ukunganyangeki	Ngaphezulu kwe-100mω / imiz.
Ivumelekile	3n
Umthwalo ovumelekileyo ovunyiweyo	I-21N (Shaft isiphelo / kwisiphelo seshaft)

I-02 Inkcazo yombane

Imodeli No.	Intetho yengelosi	Ubude beMoto	I-Voltage	Okwangoku	Ukumelana	Isikhuseli	Ukubamba i-torque	I-Inetia	Ubunzima
	(°)	(L) mm	V	A	Ω	mh	mn.m	G.Cm²	G
I-11hs3406	1.8	53	3.8	0.67	5.6	3.8	60	9	110

Ngasentla kuphela kwiimveliso zommeli, iimveliso zesicelo esikhethekileyo zingenziwa ngokwesicelo somthengi.

Inqanaba lokufakelwa

Inqanaba lokufakelwa	I-inssen voltage	Ukunganyangeki
Iklasi b	I-500V i-AC	Ngaphezulu kwe-100 mω
Iklasi f	I-500V i-AC	Ngaphezulu kwe-100 mω

Inqanaba lokufakwa:

Inqanaba lokufakelwa kwemoto yombane libhekisa kwinqanaba lokuxhathisa ubushushu lwezinto zokufakelwa, ezahlulwe zaba yi 、-E 、B 、F kunye ne-H F kunye ne-H D kwaye i- H kwaye . ikhutshiwe ikhutshiwe kwiqondo lokushisa lemoto ethelekiswa neqondo lobushushu.

Udidi lobushushu lwe-insulation	Inqanaba	E Inqanaba le-	B Inqanaba	F	H
Ubushushu obukhulu (℃)	105	120	130	155	180
Ubushushu bomoya bunyuka (k)	60	75	80	100	125
I-PROCTRAM yobushushu (℃)	80	95	100	120	145

I-03 ubukhulu

Umzobo we-Wiring

Iimeko zeTekhnoloji ze-04

Ukuchaneka kwe-Angle	± 5%
Ukuchaneka kokuchasana	± 10%
Ukuchaneka kwento	± 20%
Iqondo lobushushu linyuka	I-80 ° CAX.
Ubushushu obugciniwe	-20 ° C ~ + 50 ° C
Ukunganyangeki	I-100mω min 500v dc
Amandla kaDiacritric	I-500V i-AC
Umthwalo ovumelekileyo ovunyiweyo	I-21N
Ivumelekile	3n

Iprofayile yeNkampani ye-05

'Zhong hua jiang ' ibali

Saqala njani?

I-Huajiang yasungulwa 2000, ukuqala kwimveliso ye-CNC yokuGcina i-SPITE CORTE, emva koko yandiswa kwimveliso eyandisiweyo ye-VFD (i-drive eguquguqukayo) kunye noomatshini abakrolayo.

Ukuphonononga kunye nokuphuhlisa ukuthengisa ngakumbi, samisela uphawu ' Zhong hua jiang ' Ngo-2018.

Yintoni esenza sibe neqhayiya?

Sibhalisile ilungelo elilodwa lomenzi welungelo lokufumana inguqulelo yethu yomoya wokuphola. I-Patent Hayi: 200730184245.5.

Sineminyaka engama-20 yokufumana amava okuvelisa kule ntsimi.

Sele sithumela iimveliso zethu kwihlabathi liphela kubandakanya inkampani eyaziwayo e-USA naseJamani.