NEMA 28 Stepper Motor High Torque 1.8° 2-Phase Hybrid Stepper maka CNC, ngwa nbipute 3D, Robotics, Automation, DIY Projects

  01 Nkọwapụta izugbe  

Nke a NEMA 28 elu torque 2 pse hybrid stepper moto emebere maka sistemụ njikwa ngagharị kọmpat. Ọ na-enye 1.8 ° nzọụkwụ angle, 3.8V gosiri voltaji, 0.8A gosiri ugbu a, na kwụsiri ike na-ejide igwe CNC, akụrụngwa akpaaka, robotics, ndị na-ebi akwụkwọ 3D, na ọrụ njikwa ngagharị OEM.

Ihe	Nkọwapụta
Nọmba nke Usoro	2
Akụkụ nzọụkwụ	1.8°±5%
Ogo voltaji	3.8V
Enyere aha ugbu a	0.8A
Nguzogide	5.6Ω ± 10% na 20°C
Inductance	3.8mH ± 20% na 1kHz, 1Vrms
Jide Torque	N'elu 0.06Nm min.
Detent Torque	N'okpuru 0.4N.cm kacha.
Rotor Inertia	9g.cm ⊃2;
Ụdị ndu	AWG26 UL1061
Klas mkpuchi	Klas B
Ike Dielectric	500V AC, 1 nkeji
Nguzogide mkpuchi	Karịrị 100MΩ min.
Ibu Nkwanye anabatara	3N
Ibu Radial anabatara	21N na njedebe ogwe

  02 Nkọwapụta ọkụ eletrik  

Ụdị No.	Akụkụ nzọụkwụ	Ogologo moto	Voltaji	Ugbu a	Nguzogide	Inductance	Jide Torque	Inertia	Ibu
	Celsius	L/mm	V	A	Ω	mH	mN.m	g.cm ⊃2;	g
11HS3406	1.8	53	3.8	0.67	5.6	3.8	60	9	110

  03 Akụkụ  

  Eserese waya  

  Ọnọdụ teknụzụ 04  

Izizi akụkụ Nzọụkwụ Nzọụkwụ	±5%
Nguzogide ziri ezi	± 10%
Nzizi nke inductance	± 20%
Okpomọkụ Bilie	80°C kacha.
Nguzogide mkpuchi	100MΩ Min. 500V DC
Ike Dielectric	500V AC 1 nkeji
Ibu Radial anabatara	21N
Ibu mbufe anabatara	3N

  05 Ngwaahịa Uru  

• 2 Phase ngwakọ stepper moto maka njikwa ngagharị ziri ezi.

• 1.8° nzọụkwụ akụkụ na-akwado ezi n'ọnọdu na ezigbo ọrụ.

• Kọmpat NEMA 28 okpokolo agba maka oghere nrụnye nwere oke.

• 60mN.m na-ejide torque maka akpaaka dị fechaa na ngwa CNC.

• Klas B mkpuchi na ike dielectric 500V AC maka ọrụ a pụrụ ịdabere na ya.

• Kwesịrị ekwesị maka ọrụ OEM stepper moto, usoro ngagharị CNC, na akụrụngwa akpaaka.

  06 Ngwa  

• CNC rawụta na CNC ihe osise axis njikwa

• Mpempe akwụkwọ 3D na obere akụrụngwa akpaaka

• Robotics na usoro nhazi nkenke

• Igwe nkwakọ ngwaahịa na akụrụngwa akara

• Ngwa ahụike na ngwa nyocha

• Sistemụ njikwa ngagharị OEM omenala

  07 Asambodo ngwaahịa  

  FAQ  

Kedu akụkụ nzọụkwụ nke NEMA 28 stepper moto a?

Akụkụ nzọụkwụ bụ 1.8 ° ± 5%, nke na-akwado nhazi nhazi maka CNC, akpaaka, robotics, na ngwa njikwa ngagharị.

Kedu ihe bụ voltaji agbagoro na nke ugbu a?

Akara voltaji bụ 3.8V na akara ugbu a bụ 0.8A.

Gịnị bụ njide torque nke moto a?

Ọkụ na-ejide ike bụ 60mN.m, dabara maka sistemụ ngagharị kọmpat nke chọrọ nrụpụta torque kwụsiri ike.

Kedu ngwa ngwa ngwakọ stepper moto nke abụọ a dabara adaba?

Ọ dabara maka igwe CNC, akụrụngwa akpaaka, robotics, ndị na-ebi akwụkwọ 3D, igwe nkwakọ ngwaahịa, ngwa ụlọ nyocha, na sistemụ njikwa ngagharị OEM.

Ibe a ọ gụnyere eserese waya na eserese nha?

Ee. Ibe ngwaahịa ahụ gụnyere eserese akụkụ igwe yana eserese wiring iji nyere ndị injinia aka kwado oghere nrụnye yana ihe achọrọ.